/usr/bin/bash
bash - GNU Bourne-Again SHell
SYNOPSIS
bash [options] [command_string | file]
COPYRIGHT
Bash is Copyright (C) 1989-2020 by the Free Software Foundation, Inc.
DESCRIPTION
Bashはsh互換のコマンド言語インタプリタであり、標準入力やファイルから読み込んだコマンドを実行する。 Bashには、KornシェルやCシェル（kshやcsh）の便利な機能も組み込まれている。
Bashは、IEEE POSIX仕様（IEEE Standard 1003.1）のシェルとユーティリティの部分に準拠した実装を意図している。 BashはデフォルトでPOSIXに準拠するように設定できる。
OPTIONS
-oを含め、set組み込みコマンドの説明で文書化されている1文字のシェル・オプションはすべて、シェル起動時のオプションとして使用できる。 さらに、bashは起動時に以下のオプションを解釈する：
- -c
- オプションがある場合、コマンドは最初の非オプション引数 command_string から読み込まれる。 -cオプションがある場合、コマンドは最初のオプション以外の引数command_stringから読み込まれる。command_stringの後に引数がある場合、最初の引数は$0に代入され、残りの引数は位置パラメーターに代入される。0への代入は、シェルの名前を設定し、警告やエラーメッセージで使われる。
- -i
- オプションを指定すると、シェルは対話型になる。
- -l
- bash をログイン・シェルとして起動したかのように動作させる（後述の INVOCATION を参照）。
- -r
- オプションを指定すると、シェルが制限される（後述のRESTRICTED SHELLを参照）。
- -s
- オプションがある場合、またはオプション処理後に引数が残っていない場合、コマンドは標準入力から読み込まれる。 このオプションにより、対話型シェルを起動するときや、 パイプ経由で入力を読み込むときに、位置パラメーターを設定できる。
- -v
- 読み込まれたシェル入力行を表示する。
- -x
- 実行されたコマンドとその引数を表示する。
- -D
- $で始まるすべての二重引用符付き文字列のリストを標準出力に出力する。
これらは、現在のロケールがCでもPOSIXでもない場合に言語変換の対象となる文字列である。 これは-nオプションを意味し、コマンドは実行されない。
- [-+]O [shopt_option]
- shopt_optionは、shopt組み込み関数が受け付けるシェル・オプションの1つである（後述のSHELL BUILTIN COMMANDS参照）。 shopt_option が存在する場合、-O はそのオプションの値を設定する；
- +Oで設定を解除する。 shopt_option が与えられない場合、 shopt が受け付けるシェルオプションの名前と値が標準出力に表示される。 起動オプションが +O の場合、出力は入力として再利用できる形式で表示される。
- -- はオプションの終了を知らせ、それ以降のオプション処理を無効にする。 の後の引数は、ファイル名と引数として扱われる。 '-'の引数は--と等価である。
Bashは、複数文字のオプションも解釈する。 これらのオプションは、1文字のオプションよりも前にコマンドラインに現れなければ認識されない。
- --debugger
- シェルが起動する前にデバッガ・プロファイルが実行されるようにする。 拡張デバッグモードをオンにする（以下のshopt組み込み関数へのextdebugオプションの説明を参照のこと）。
- --dump-po-strings
- -D と同等だが、出力は GNU gettext po (portable object) ファイル形式になる。
- --dump-strings
- -Dと同等である。
- --help Display a usage message on standard output and exit successfully.
- --init-file file
- --rcfile file
- シェルが対話型の場合、システム全体の初期化ファイル/etc/bash.bashrcと標準の個人用初期化ファイル~/.bashrcの代わりに、ファイルからコマンドを実行する（下記のINVOCATIONを参照）。
- --login
- -lと同等である。
- --noediting
- シェルが対話型の場合、GNU readline ライブラリを使ってコマンドラインを読まない。
- --noprofile
- システム全体の起動ファイル/etc/profileや、個人用の初期化ファイル~/.bash_profile、~/.bash_login、~/.profileを読み込まない。 デフォルトでは、bashはログイン・シェルとして起動されたときにこれらのファイルを読み込む（後述のINVOCATIONを参照）。
- --norc
- シェルが対話型の場合、システム全体の初期化ファイル/etc/bash.bashrcと個人の初期化ファイル~/.bashrcを読み込んで実行しない。 シェルが sh として起動された場合、このオプションはデフォルトでオンになる。
- --posix
- デフォルトの動作がPOSIX標準と異なるbashの動作を標準に合わせるように変更する（posixモード）。 posixモードがbashの動作にどのような影響を与えるかについての詳細は、後述のSEE ALSOを参照のこと。
- --restricted
- シェルが制限された状態になる（下記のRESTRICTED SHELLを参照）。
- --verbose
- -vと同等である。
- --version
- bashのバージョン情報を標準出力に表示し、正常終了する。
ARGUMENTS
オプション処理後に引数が残り、-cオプションも-sオプションも指定されていない場合、最初の引数はシェルコマンドを含むファイル名とみなされる。 この方法でbashが起動されると、$0にファイル名が設定され、位置パラメーターに残りの引数が設定される。 Bashはこのファイルからコマンドを読み込んで実行し、終了する。Bashの終了ステータスは、スクリプト内で最後に実行されたコマンドの終了ステータスである。 コマンドが実行されなかった場合、 まず、カレントディレクトリのファイルを開こうとし、ファイルが見つからなければ、PATH内のディレクトリからスクリプトを探す。
INVOCATION
ログインシェルとは、引数ゼロの最初の文字が - であるシェル、または --login オプションで起動されるシェルのことである。
対話型シェルとは、(-s が指定されていない限り) オプション以外の引数を指定せず、かつ -c オプションを指定せずに、標準入力と標準エラーが (isatty(3) によって決定される) 端末に接続されているシェル、または -i オプションで起動されるシェルのことである。 PS1が設定され、$-がiに含まれるのは、bashが対話型である場合であり、シェル・スクリプトやスタートアップ・ファイルがこの状態をテストできるようにするためである。
以下の段落では、bashが起動ファイルをどのように実行するかを説明する。 ファイルが存在するが読み込めない場合、bashはエラーを報告する。 チルダは、後述のEXPANSIONセクションの「チルダの展開」で説明するように、ファイル名で展開される。
bashが対話型ログイン・シェルとして、または-loginオプションを指定して非対話型シェルとして起動されると、まず/etc/profileファイルが存在する場合は、そのファイルからコマンドを読み込んで実行する。 このファイルを読み込んだ後、~/.bash_profile、~/.bash_login、~/.profileの順に探し、最初に存在し、読み取り可能なものからコマンドを読み取って実行する。 シェルの起動時に--noprofileオプションを使用すると、この動作を抑制することができる。
対話型ログイン・シェルが終了するとき、または非対話型ログイン・シェルがexit組み込みコマンドを実行するとき、bashは~/.bash_logoutファイルが存在すればそこからコマンドを読み込んで実行する。
ログイン・シェルではない対話型シェルが起動されると、bashは/etc/bash.bashrcと~/.bashrcが存在する場合、これらのファイルからコマンドを読み込んで実行する。 これは--norcオプションを使うことで抑制できる。 rcfileファイル・オプションを指定すると、/etc/bash.bashrcや~/.bashrcではなく、ファイルからコマンドを読み込んで実行するようになる。
シェル・スクリプトを実行する場合など、bashが非対話的に起動されると、環境変数BASH_ENVを探し、その値があれば展開し、展開された値を読み込んで実行するファイル名として使用する。 Bashは以下のコマンドが実行されたかのように振る舞う：
if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi
とする。しかし、PATH変数の値はファイル名の検索には使われない。
bashがshという名前で起動された場合、POSIX標準にも準拠しながら、過去のバージョンのshの起動時の動作をできるだけ忠実に模倣しようとする。 対話型ログインシェルとして起動された場合、または--loginオプションを指定した非対話型シェルとして起動された場合、まず/etc/profileと~/.profileの順にコマンドを読み込んで実行しようとする。 noprofileオプションを使用すると、この動作を抑制することができる。 対話型シェルとしてshという名前で起動されると、bashは変数ENVを探し、その値が定義されていれば展開し、展開された値を読み込み実行するファイル名として使用する。 shとして起動されたシェルは、他の起動ファイルからコマンドを読み込んで実行しようとはしないので、--rcfileオプションは効果がない。 shという名前で起動された非対話型シェルは、他の起動ファイルを読み込もうとしない。 shとして起動された場合、bashはスタートアップ・ファイルを読み込んだ後にposixモードに入る。
posix コマンドラインオプション --posix のように bash が posix モードで起動されると、スタートアップファイルの POSIX 標準に従う。 このモードでは、対話型シェルはENV変数を展開し、展開された値を名前とするファイルからコマンドが読み込まれ実行される。 他のスタートアップ・ファイルは読み込まれない。
Bashは、リモートシェルデーモン（通常はrshd）またはセキュアシェルデーモンsshdによって実行されるときのように、標準入力がネットワーク接続に接続された状態で実行されているかどうかを判断しようとする。 bashがこの方法で実行されていると判断した場合、~/.bashrcと~/.bashrcが存在し、これらのファイルが読み取り可能であれば、これらのファイルからコマンドを読み取り、実行する。 shとして起動した場合は、このようなことはしない。 norcオプションを使用するとこの動作を抑制でき、--rcfileオプションを使用すると別のファイルを強制的に読み込むことができるが、rshdもsshdも通常、これらのオプションを指定してシェルを起動したり、オプションを指定したりすることはできない。
有効ユーザー（グループ）IDが実ユーザー（グループ）IDに等しくない状態でシェルが起動され、-pオプションが与えられない場合、起動ファイルは読み込まれず、シェル関数は環境から継承されず、SHELLOPTS、BASHOPTS、CDPATH、GLOBIGNORE変数が環境にある場合は無視され、有効ユーザーIDが実ユーザーIDに設定される。 起動時に-pオプションが指定された場合、起動時の動作は同じであるが、実効ユーザーIDはリセットされない。
DEFINITIONS
以下の定義は、本書の残りの部分で使用される。
- blank
- スペースあるいはタブ
- word
- シェルが1つの単位とみなす文字列。 トークンとも呼ばれる。
- name
- 英数字とアンダースコアのみで構成され、英字またはアンダースコアで始まる単語。 識別子とも呼ばれる。
- metacharacter
- 引用符で囲まれていない場合、単語を区切る文字。 以下のいずれか：
| & ; ( ) < > space tab newline- control operator
- 制御機能を果たすトークン。 以下のシンボルのいずれかである：
|| & && ; ;; ;& ;;& ( ) | |& <newline>
RESERVED WORDS
予約語はシェルにとって特別な意味を持つ語である。 以下の単語は、引用符で囲まれておらず、コマンドの最初の単語（以下の SHELL GRAMMAR を参照）、case または select コマンドの 3 番目の単語（in のみ有効）、for コマンドの 3 番目の単語（in と do のみ有効）のいずれかに指定されている場合に予約語として認識される：
! case coproc do done elif else esac fi for function if in select then until while { } time [[ ]]
SHELL GRAMMAR
Simple Commands
単純なコマンドは、空白で区切られた単語とリダイレクションが続き、制御演算子で終了する、オプションの変数代入のシーケンスである。 最初の単語は実行するコマンドを指定し、引数ゼロとして渡される。 残りの単語は、呼び出されたコマンドの引数として渡される。
単純なコマンドの戻り値は、そのコマンドの終了ステータスであり、コマンドがシグナルnで終了する場合は128+nである。
Pipelines
パイプラインは、制御演算子｜または｜&で区切られた1つまたは複数のコマンドのシーケンスである。 パイプラインの書式は以下の通りである：
[time [-p]] [ ! ] command [ [|⎪|&] command2 ... ]
commandの標準出力は、パイプを経由してcommand2の標準入力に接続される。 この接続は、コマンドで指定されたリダイレクション（後述のREDIRECTIONを参照）の前に実行される。 もし|&が使われると、commandの標準出力に加えて、commandの標準エラーもパイプを通してcommand2の標準入力に接続される。 この標準エラーから標準出力への暗黙のリダイレクトは、コマンドによって指定されたリダイレクトの後に実行される。
パイプラインの戻りステータスは、pipefailオプションが有効になっていない限り、最後のコマンドの終了ステータスになる。 pipefailが有効な場合、パイプラインの戻りステータスは、0以外のステータスで終了した最後の（右端の）コマンドの値、またはすべてのコマンドが正常に終了した場合は0になる。 パイプラインの前に予約語 ! がある場合、そのパイプラインの終了ステータスは、前述の終了ステータスの論理的否定となる。 シェルは、値を返す前にパイプラインのすべてのコマンドが終了するのを待つ。
時間予約語がパイプラインの前にある場合、パイプラインが終了すると、その実行によって消費されたユーザー時間とシステム時間だけでなく、経過時間も報告される。 pオプションは、出力フォーマットをPOSIXで指定されたものに変更する。 シェルがposixモードの場合、次のトークンが `-' で始まっていると、timeを予約語として認識しない。 TIMEFORMAT変数には、タイミング情報をどのように表示するかを指定する書式文字列を設定することができる。
シェルがposixモードの場合、timeの後に改行が続くことがある。 この場合、シェルはシェルとその子シェルが消費したユーザー時間とシステム時間の合計を表示する。 TIMEFORMAT 変数を使用して、時間情報の書式を指定することができる。
パイプラインの各コマンドは、別々のプロセスとして（つまりサブシェルで）実行される。 サブシェル環境の説明については、COMMAND EXECUTION ENVIRONMENTを参照のこと。 shopt 組み込み関数を使用して lastpipe オプションを有効にすると (後述の shopt の説明を参照)、パイプラインの最後の要素をシェルプロセスで実行することができる。
Lists
リストは、1つ以上のパイプラインを ;, &, &&, || のいずれかの演算子で区切り、オプションで ;, &, <newline> のいずれかで終了させるシーケンスである。
これらのリスト演算子のうち、&&と||は等しい優先順位を持ち、次いで ; と & が等しい優先順位を持つ。
コマンドを区切るセミコロンの代わりに、1つ以上の改行がリスト中に現れることもある。
コマンドが制御演算子&で終了する場合、シェルはサブシェルでバックグラウンドでコマンドを実行する。 シェルはコマンドの終了を待たず、リターン・ステータスは0になる。これらは非同期コマンドと呼ばれる。 で区切られたコマンドは順次実行され、シェルは各コマンドが順番に終了するのを待つ。 リターン・ステータスは、最後に実行されたコマンドの終了ステータスである。
ANDリストとORリストは、それぞれ&&と ||制御演算子で区切られた1つ以上のパイプラインのシーケンスである。 ANDリストとORリストは左連想で実行される。 ANDリストは次のような形式を持つ。
command1 && command2
command2が実行されるのは、command1が0（成功）の終了ステータスを返した場合のみである。
ORリストは次のような形をしている。
command1 || command2
command2が実行されるのは、command1がゼロ以外の終了ステータスを返した場合のみである。 ANDリストとORリストの戻りステータスは、リスト内で最後に実行されたコマンドの終了ステータスである。
Compound Commands
複合コマンドは以下のいずれかである。 ほとんどの場合、コマンドの説明のリストは、コマンドの残りの部分と1つ以上の改行で区切られ、セミコロンの代わりに改行が続くことがある。
- (list)
- リストはサブシェル環境で実行される（後述の「COMMAND EXECUTION ENVIRONMENT」を参照）。
シェルの環境に影響を与える変数割り当てや組み込みコマンドは、コマンドの完了後には有効にならない。 リターン・ステータスは list の終了ステータスである。
- { list; }
- listは単に現在のシェル環境で実行される。listは改行またはセミコロンで終了しなければならない。 これはグループ・コマンドとして知られている。 戻りステータスは、listの終了ステータスである。 メタキャラクタ (and)とは異なり、{and}は予約語であり、予約語を認識することが許可されている場所に出現しなければならないことに注意すること。 これらは単語の区切りを引き起こさないので、空白または他のシェル・メタキャラクタでlistと区切らなければならない。
- ((expression))
- 式は、後述の「ARITHMETIC EVALUATION」のルールに従って評価される。 式の値が0でない場合、戻り値は0であり、そうでない場合、戻り値は1である。
- [[ expression ]]
- 条件式の評価に応じて 0 または 1 のステータスを返す。 式は、後述の「CONDITIONAL EXPRESSIONS」で説明するプライマリで構成される。
[[ and ]]の間の単語では、単語分割とパス名展開は行われない。 チルダ展開、パラメータ展開、変数展開、算術展開、コマンド置換、プロセス置換、引用符除去は行われる。 -fのような条件演算子は、プライマリとして認識されるためには、引用符で囲まれていな ければならない。
- [[と一緒に使用すると、< and > 演算子は、現在のロケールを使用して辞書順にソートする。
- パラメータの扱い（パラメータの欠落など）については、test組み込みコマンドの説明（後述の「SHELL BUILTIN COMMANDS」セクション）を参照のこと。
- 演算子 == および != が使用されると、演算子の右側の文字列はパターンとみなされ、 extglob シェル・オプションが有効であるかのように、後述の「パターン・マッチング」の規則に従ってマッチングされる。 nocasematchシェルオプションが有効な場合、アルファベットの大文字小文字を区別せずにマッチングが行われる。
戻り値は、文字列がパターンにマッチする（==）かマッチしない（!=）なら0、そうでなければ1である。 パターンの任意の部分を引用符で囲むと、引用符で囲んだ部分が文字列としてマッチする。
- さらに二項演算子=~が使用でき、優先順位は==や!=と同じである。
- この演算子が使用されると、演算子の右側の文字列は POSIX 拡張正規表現とみなされ、 (regex(3) で通常説明されている POSIX regcomp と regexec インターフェイスを使用して) それに従ってマッチングされる。 返り値は、文字列がパターンにマッチすれば 0、マッチしなければ 1 である。 正規表現が構文的に正しくない場合、条件式の戻り値は2である。
nocasematchシェルオプションが有効な場合、アルファベットの大文字小文字を区別せずにマッチが行われる。 パターンのどの部分も引用符で囲むことができ、引用符で囲んだ部分を文字列としてマッチさせることができる。 正規表現中の括弧表現は注意深く扱わなければならない。 なぜなら、通常のクォート文字は括弧の間で意味を失うからである。 パターンがシェル変数に格納されている場合、変数展開を引用符で囲むと、 パターン全体が文字列としてマッチするようになる。
- パターンは、文字列のどの部分にもマッチする。 正規表現演算子 ^ と $ を使ってパターンにアンカーを付けると、文字列全体にマッチするようになる。 配列変数BASH_REMATCHは、文字列のどの部分がパターンにマッチしたかを記録する。 インデックス0のBASH_REMATCHの要素には、正規表現全体にマッチした文字列の部分が含まれる。 正規表現内の括弧で囲まれた部分式でマッチした文字列は、残りのBASH_REMATCHのインデックスに保存される。インデックスnのBASH_REMATCHの要素は、n番目の括弧付き部分式にマッチする文字列の部分である。
式は以下の演算子を使って結合することができる：
- ( expression )
- 式の値を返す。 これは、演算子の通常の優先順位を上書きするために使われる。
- ! expression
- 式が偽なら真。
- expression1 && expression2
- expression1とexpression2の両方が真なら真。
- expression1 || expression2
- expression1またはexpression2のどちらかが真なら真。
- expression1の値が条件式全体の戻り値を決定するのに十分である場合、&&と||演算子はexpression2を評価しない。
- for name [ [ in [ word ... ] ] ; ] do list ; done
- inに続く単語のリストが展開され、項目のリストが生成される。 変数名はこのリストの各要素に順番に設定され、その都度listが実行される。 inが省略された場合、forコマンドは設定された位置パラメーター（後述のPARAMETERSを参照）ごとにlistを1回実行する。 戻りステータスは、最後に実行されたコマンドの終了ステータスである。 inに続く項目の展開の結果、リストが空になった場合、コマンドは実行されず、リターン・ステータスは0となる。
- for (( expr1 ; expr2 ; expr3 )) ; do list ; done
- まず、算術式 expr1 は、後述の「ARITHMETIC EVALUATION」のルールに従って評価される。
算術式expr2は、ゼロになるまで繰り返し評価される。 expr2がゼロ以外の値に評価されるたびに、listが実行され、算術式expr3が評価される。 いずれかの式が省略された場合、その式は1に評価されるものとして動作する。 戻り値は、実行されたリストの最後のコマンドの終了ステータスであり、いずれかの式が無効な場合は偽である。
- select name [ in word ] ; do list ; done
- inに続く単語のリストが展開され、項目のリストが生成される。 展開された単語のセットは標準エラーに出力される。 inが省略された場合、位置パラメーターが表示される(後述のPARAMETERSを参照)。 次にPS3プロンプトが表示され、標準入力から1行が読み込まれる。 その行が、表示された単語の1つに対応する数字で構成されている場合、nameの値はその単語に設定される。 行が空の場合、単語とプロンプトが再度表示される。 EOFが読み込まれると、コマンドは完了する。 それ以外の値が読み込まれると、nameにはnullが設定される。 読み込まれた行は変数REPLYに保存される。 リストは、breakコマンドが実行されるまで、選択のたびに実行される。 selectの終了ステータスは、リスト内で最後に実行されたコマンドの終了ステータスであり、コマンドが実行されなかった場合は0である。
- case word in [ [(] pattern [ | pattern ] ... ) list ;; ] ... esac
- caseコマンドはまず単語を展開し、後述のパターンマッチングで説明されているマッチングルールを使って、順番に各パターンとのマッチングを試みる。 単語は、チルダ展開、パラメータと変数の展開、算術展開、コマンド置換、プロセス置換、引用符除去を使って展開される。 検査される各パターンは、チルダ展開、パラメータ展開、変数展開、算術展開、コマンド置換、プロセス置換を使って展開される。 nocasematchシェル・オプションを有効にすると、アルファベットの大文字と小文字を区別せずにマッチが行われる。 マッチすると、対応するリストが実行される。 演算子;;が使われると、最初のパターンマッチの後、それ以降のマッチは試みられない。 の代わりに;&を使うと、次のパターン・セットに関連するリストが実行される。 の代わりに ;;& を使用すると、シェルは文中に次のパターンリストがあればそれをテストし、マッチした場合に関連するリストを実行する。 パターンにマッチしなければ、終了ステータスは0である。 それ以外の場合は、リスト内で最後に実行されたコマンドの終了ステータスとなる。
- if list; then list; [ elif list; then list; ] ... [ else list; ] fi
- ifリストが実行される。 その終了ステータスがゼロであれば、thenリストが実行される。 そうでなければ、各elifリストが順番に実行され、その終了ステータスがゼロであれば、対応するthenリストが実行され、コマンドは完了する。 そうでない場合、elseリストがあればそれが実行される。 終了ステータスは、最後に実行されたコマンドの終了ステータスであり、どの条件も真をテストしなかった場合はゼロである。
- while list-1; do list-2; done
- until list-1; do list-2; done
- whileコマンドは、リストlist-1の最後のコマンドがゼロの終了ステータスを返す限り、リストlist-2を実行し続ける。 untilコマンドはwhileコマンドと同じであるが、テストが否定される点が異なる： list-1の最後のコマンドが0以外の終了ステータスを返す限り、list-2は実行される。 whileコマンドとuntilコマンドの終了ステータスは、リスト-2で最後に実行されたコマンドの終了ステータスであり、何も実行されなかった場合はゼロである。
Coprocesses
コプロセスは、coproc予約語を先頭に持つシェルコマンドである。 コプロセスは、コマンドを&制御演算子で終了させたかのように、サブシェル内で非同期に実行され、実行中のシェルとコプロセスの間に双方向パイプが確立される。
コプロセスの書式は以下の通りである：
- coproc [NAME] command [redirections]
これはNAMEという名前のコプロセスを作成する。 NAME が与えられない場合、デフォルトの名前は COPROC である。 NAME は、 command が単純コマンド（上記を参照のこと）の場合は与えてはならない。 コプロセスが実行されると、シェルは実行中のシェルのコンテキスト内に NAME という名前の配列変数（後述の「配列」を参照）を作成する。 コマンドの標準出力は、実行シェルのファイル記述子にパイプで接続され、そのファイル記述子がNAME[0]に代入される。 コマンドの標準入力は、実行シェルのファイル記述子にパイプで接続され、そのファイル記述子が NAME[1]に割り当てられる。 このパイプは、コマンドで指定されたリダイレクション（後述のREDIRECTIONを参照）の前に確立される。 ファイル記述子は、標準的な単語展開を使って、シェルコマンドやリダイレクションの引数として利用できる。 コマンドとプロセス置換を実行するために作成されたもの以外では、ファイル記述子はサブシェルでは利用できない。 コプロセスを実行するために生成されたシェルのプロセス ID は、変数 NAME_PID の値として利用できる。 wait 組み込みコマンドは、コプロセスの終了を待つために使用できる。
コプロセスは非同期コマンドとして作成されるため、coproc コマンドは常に成功を返す。 コプロセスの戻りステータスは、コマンドの終了ステータスである。
Shell Function Definitions
シェル関数は、単純なコマンドのように呼び出され、新しい位置パラメーターのセットを持つ複合コマンドを実行するオブジェクトである。 シェル関数は以下のように宣言される：
- fname () compound-command [redirection]
- function fname [()] compound-command [redirection]
- これはfnameという名前の関数を定義する。 予約語のfunctionは省略可能である。 関数の予約語を指定した場合、括弧は省略可能である。 関数の本体は複合コマンドcompound-commandである（上記の複合コマンドを参照のこと）。 このコマンドは通常{と}の間のコマンドのリストであるが、1つの例外を除いて、上記の「複合コマンド」にリストされているコマンドであれば何でもよい： compound-commandは、fnameが単純コマンドの名前として指定されると、必ず実行される。 posixモードでは、fnameは有効なシェル名でなければならず、POSIX特殊組み込み関数の名前であってはならない。 デフォルトモードでは、関数名は$を含まない引用符で囲まれていないシェル語であれば何でもよい。 関数定義時に指定されたリダイレクション（後述のREDIRECTIONを参照）は、関数実行時に実行される。 構文エラーが発生するか、同じ名前の読み取り専用関数が既に存在しない限り、関数定義の終了ステータスは0である。 実行されると、関数の終了ステータスは、ボディ内で最後に実行されたコマンドの終了ステータスになる。 (後述のFUNCTIONSを参照のこと）。
COMMENTS
非対話型シェル、または shopt 組み込みコマンドの interactive_comments オプションが有効になっている対話型シェル（後述の「SHELL BUILTIN COMMANDS」を参照）では、# で始まる単語は、その単語とその行の残りのすべての文字を無視する。 interactive_comments オプションを有効にしていない対話型シェルでは、コメントは許可されない。 対話型シェルでは、interactive_commentsオプションはデフォルトでオンになっている。
QUOTING
クオートは、シェルに対して特定の文字や単語の特別な意味を取り除くために使用される。 引用符で囲むことで、特殊文字に対する特別な扱いを無効にしたり、予約語をそのようなものとして認識させないようにしたり、パラメータの展開を防止したりすることができる。
上記のDEFINITIONSに列挙されているメタキャラクタは、シェルにとって特別な意味を持ち、それ自身を表す場合にはクォートしなければならない。
コマンドのヒストリ展開機能を使用する場合（下記の「ヒストリ展開」を参照）、ヒストリ展開を防ぐために、ヒストリ展開文字（通常は「！」）を引用符で囲む必要がある。
エスケープ文字、一重引用符、二重引用符である。
引用符で囲まないバックスラッシュ（ \ ）はエスケープ文字である。 これは、<改行>を除き、次に続く文字のリテラル値を保持する。 <newline>のペアが現れ、バックスラッシュ自体が引用符で囲まれていない場合、その<newline>は行の続きとして扱われる（つまり、入力ストリームから取り除かれ、事実上無視される）。
文字を一重引用符で囲むと、引用符内の各文字のリテラル値が保持される。 バックスラッシュが先行する場合でも、一重引用符の間に一重引用符を置くことはできない。
二重引用符で文字を囲むと、引用符内のすべての文字のリテラル値が保持されるが、$、`、 \、およびヒストリ展開が有効な場合は! シェルがposixモードの場合、! はヒストリ展開が有効になっていても、二重引用符の中では特別な意味を持たない。 文字$と`は、二重引用符内でも特別な意味を持つ。 バックスラッシュは、$、`、", \、<改行> のいずれかの文字が続く場合のみ特別な意味を持つ。 二重引用符の前にバックスラッシュを付けると、二重引用符の中で引用符を付けることができる。 有効にすると、二重引用符の中に現れた ! がバックスラッシュでエスケープされない限り、履歴展開が実行される。 の前のバックスラッシュは削除されない。
特別なパラメータである*と@は、二重引用符で囲むと特別な意味を持つ（下記のPARAMETERSを参照）。
$'string'という形式の単語は特別に扱われる。 この単語は文字列に展開され、バックスラッシュでエスケープされた文字が ANSI C標準の指定に従って置き換えられる。 バックスラッシュ・エスケープ・シーケンスが存在する場合は、以下のようにデコードされる：
- \a alert (bell)
- \b backspace
- \e
- \E an escape character
- \f form feed
- \n new line
- \r carriage return
- \t horizontal tab
- \v vertical tab
- \\ backslash
- \' single quote
- \" double quote
- \? question mark
- \nnn 8ビットの文字で、その値は8進数nnn（1桁から3桁の8進数）である。
- \xHH 値が16進数HH（1桁または2桁の16進数）である8ビット文字
- \uHHHH Unicode(ISO/IEC 10646)文字で、その値は16進数値HHHHである。 (1桁から4桁の16進数)
- \UHHHHHHHH
- ユニコード(ISO/IEC 10646)文字で、その値は16進数値HHHHHHHHHHである。 (1桁から8桁の16進数)
- \cx a control-x character
展開された結果は、ドル記号がなかったかのように、単一引用符でくくられる。
二重引用符で囲まれた文字列の前にドル記号 ($"string") を置くと、その文字列は現在のロケールに従って翻訳される。 gettextインフラストラクチャは、LC_MESSAGESとTEXTDOMAINシェル変数を使用して、メッセージカタログの検索と翻訳を実行する。 現在のロケールがCまたはPOSIXの場合、または利用可能な翻訳がない場合、ドル記号は無視される。 文字列が翻訳され置換される場合、置換は二重引用符で囲まれる。
PARAMETERS
A parameter is an entity that stores values. It can be a name, a number, or one of the special
characters listed below under Special Parameters. A variable is a parameter denoted by a name.
A variable has a value and zero or more attributes. Attributes are assigned using the declare
builtin command (see declare below in SHELL BUILTIN COMMANDS).
A parameter is set if it has been assigned a value. The null string is a valid value. Once a
variable is set, it may be unset only by using the unset builtin command (see SHELL BUILTIN COM‐
MANDS below).
A variable may be assigned to by a statement of the form
name=[value]
If value is not given, the variable is assigned the null string. All values undergo tilde expan‐
sion, parameter and variable expansion, command substitution, arithmetic expansion, and quote re‐
moval (see EXPANSION below). If the variable has its integer attribute set, then value is evalu‐
ated as an arithmetic expression even if the $((...)) expansion is not used (see Arithmetic Ex‐
pansion below). Word splitting is not performed, with the exception of "$@" as explained below
under Special Parameters. Pathname expansion is not performed. Assignment statements may also
appear as arguments to the alias, declare, typeset, export, readonly, and local builtin commands
(declaration commands). When in posix mode, these builtins may appear in a command after one or
more instances of the command builtin and retain these assignment statement properties.
In the context where an assignment statement is assigning a value to a shell variable or array
index, the += operator can be used to append to or add to the variable's previous value. This
includes arguments to builtin commands such as declare that accept assignment statements (decla‐
ration commands). When += is applied to a variable for which the integer attribute has been set,
value is evaluated as an arithmetic expression and added to the variable's current value, which
is also evaluated. When += is applied to an array variable using compound assignment (see Arrays
below), the variable's value is not unset (as it is when using =), and new values are appended to
the array beginning at one greater than the array's maximum index (for indexed arrays) or added
as additional key-value pairs in an associative array. When applied to a string-valued variable,
value is expanded and appended to the variable's value.
A variable can be assigned the nameref attribute using the -n option to the declare or local
builtin commands (see the descriptions of declare and local below) to create a nameref, or a ref‐
erence to another variable. This allows variables to be manipulated indirectly. Whenever the
nameref variable is referenced, assigned to, unset, or has its attributes modified (other than
using or changing the nameref attribute itself), the operation is actually performed on the vari‐
able specified by the nameref variable's value. A nameref is commonly used within shell func‐
tions to refer to a variable whose name is passed as an argument to the function. For instance,
if a variable name is passed to a shell function as its first argument, running
declare -n ref=$1
inside the function creates a nameref variable ref whose value is the variable name passed as the
first argument. References and assignments to ref, and changes to its attributes, are treated as
references, assignments, and attribute modifications to the variable whose name was passed as $1.
If the control variable in a for loop has the nameref attribute, the list of words can be a list
of shell variables, and a name reference will be established for each word in the list, in turn,
when the loop is executed. Array variables cannot be given the nameref attribute. However,
nameref variables can reference array variables and subscripted array variables. Namerefs can be
unset using the -n option to the unset builtin. Otherwise, if unset is executed with the name of
a nameref variable as an argument, the variable referenced by the nameref variable will be unset.
Positional Parameters
A positional parameter is a parameter denoted by one or more digits, other than the single digit
0. Positional parameters are assigned from the shell's arguments when it is invoked, and may be
reassigned using the set builtin command. Positional parameters may not be assigned to with as‐
signment statements. The positional parameters are temporarily replaced when a shell function is
executed (see FUNCTIONS below).
When a positional parameter consisting of more than a single digit is expanded, it must be en‐
closed in braces (see EXPANSION below).
Special Parameters
The shell treats several parameters specially. These parameters may only be referenced; assign‐
ment to them is not allowed.
* Expands to the positional parameters, starting from one. When the expansion is not within
double quotes, each positional parameter expands to a separate word. In contexts where it
is performed, those words are subject to further word splitting and pathname expansion.
When the expansion occurs within double quotes, it expands to a single word with the value
of each parameter separated by the first character of the IFS special variable. That is,
"$*" is equivalent to "$1c$2c...", where c is the first character of the value of the IFS
variable. If IFS is unset, the parameters are separated by spaces. If IFS is null, the
parameters are joined without intervening separators.
@ Expands to the positional parameters, starting from one. In contexts where word splitting
is performed, this expands each positional parameter to a separate word; if not within
double quotes, these words are subject to word splitting. In contexts where word split‐
ting is not performed, this expands to a single word with each positional parameter sepa‐
rated by a space. When the expansion occurs within double quotes, each parameter expands
to a separate word. That is, "$@" is equivalent to "$1" "$2" ... If the double-quoted
expansion occurs within a word, the expansion of the first parameter is joined with the
beginning part of the original word, and the expansion of the last parameter is joined
with the last part of the original word. When there are no positional parameters, "$@"
and $@ expand to nothing (i.e., they are removed).
# Expands to the number of positional parameters in decimal.
? Expands to the exit status of the most recently executed foreground pipeline.
- Expands to the current option flags as specified upon invocation, by the set builtin com‐
mand, or those set by the shell itself (such as the -i option).
$ Expands to the process ID of the shell. In a () subshell, it expands to the process ID of
the current shell, not the subshell.
! Expands to the process ID of the job most recently placed into the background, whether ex‐
ecuted as an asynchronous command or using the bg builtin (see JOB CONTROL below).
0 Expands to the name of the shell or shell script. This is set at shell initialization.
If bash is invoked with a file of commands, $0 is set to the name of that file. If bash
is started with the -c option, then $0 is set to the first argument after the string to be
executed, if one is present. Otherwise, it is set to the filename used to invoke bash, as
given by argument zero.
Shell Variables
The following variables are set by the shell:
_ At shell startup, set to the pathname used to invoke the shell or shell script being exe‐
cuted as passed in the environment or argument list. Subsequently, expands to the last
argument to the previous simple command executed in the foreground, after expansion. Also
set to the full pathname used to invoke each command executed and placed in the environ‐
ment exported to that command. When checking mail, this parameter holds the name of the
mail file currently being checked.
BASH Expands to the full filename used to invoke this instance of bash.
BASHOPTS
A colon-separated list of enabled shell options. Each word in the list is a valid argu‐
ment for the -s option to the shopt builtin command (see SHELL BUILTIN COMMANDS below).
The options appearing in BASHOPTS are those reported as on by shopt. If this variable is
in the environment when bash starts up, each shell option in the list will be enabled be‐
fore reading any startup files. This variable is read-only.
BASHPID
Expands to the process ID of the current bash process. This differs from $$ under certain
circumstances, such as subshells that do not require bash to be re-initialized. Assign‐
ments to BASHPID have no effect. If BASHPID is unset, it loses its special properties,
even if it is subsequently reset.
BASH_ALIASES
An associative array variable whose members correspond to the internal list of aliases as
maintained by the alias builtin. Elements added to this array appear in the alias list;
however, unsetting array elements currently does not cause aliases to be removed from the
alias list. If BASH_ALIASES is unset, it loses its special properties, even if it is sub‐
sequently reset.
BASH_ARGC
An array variable whose values are the number of parameters in each frame of the current
bash execution call stack. The number of parameters to the current subroutine (shell
function or script executed with . or source) is at the top of the stack. When a subrou‐
tine is executed, the number of parameters passed is pushed onto BASH_ARGC. The shell
sets BASH_ARGC only when in extended debugging mode (see the description of the extdebug
option to the shopt builtin below). Setting extdebug after the shell has started to exe‐
cute a script, or referencing this variable when extdebug is not set, may result in incon‐
sistent values.
BASH_ARGV
An array variable containing all of the parameters in the current bash execution call
stack. The final parameter of the last subroutine call is at the top of the stack; the
first parameter of the initial call is at the bottom. When a subroutine is executed, the
parameters supplied are pushed onto BASH_ARGV. The shell sets BASH_ARGV only when in ex‐
tended debugging mode (see the description of the extdebug option to the shopt builtin be‐
low). Setting extdebug after the shell has started to execute a script, or referencing
this variable when extdebug is not set, may result in inconsistent values.
BASH_ARGV0
When referenced, this variable expands to the name of the shell or shell script (identical
to $0; see the description of special parameter 0 above). Assignment to BASH_ARGV0 causes
the value assigned to also be assigned to $0. If BASH_ARGV0 is unset, it loses its spe‐
cial properties, even if it is subsequently reset.
BASH_CMDS
An associative array variable whose members correspond to the internal hash table of com‐
mands as maintained by the hash builtin. Elements added to this array appear in the hash
table; however, unsetting array elements currently does not cause command names to be re‐
moved from the hash table. If BASH_CMDS is unset, it loses its special properties, even
if it is subsequently reset.
BASH_COMMAND
The command currently being executed or about to be executed, unless the shell is execut‐
ing a command as the result of a trap, in which case it is the command executing at the
time of the trap. If BASH_COMMAND is unset, it loses its special properties, even if it
is subsequently reset.
BASH_EXECUTION_STRING
The command argument to the -c invocation option.
BASH_LINENO
An array variable whose members are the line numbers in source files where each corre‐
sponding member of FUNCNAME was invoked. ${BASH_LINENO[$i]} is the line number in the
source file (${BASH_SOURCE[$i+1]}) where ${FUNCNAME[$i]} was called (or
${BASH_LINENO[$i-1]} if referenced within another shell function). Use LINENO to obtain
the current line number.
BASH_LOADABLES_PATH
A colon-separated list of directories in which the shell looks for dynamically loadable
builtins specified by the enable command.
BASH_REMATCH
An array variable whose members are assigned by the =~ binary operator to the [[ condi‐
tional command. The element with index 0 is the portion of the string matching the entire
regular expression. The element with index n is the portion of the string matching the
nth parenthesized subexpression.
BASH_SOURCE
An array variable whose members are the source filenames where the corresponding shell
function names in the FUNCNAME array variable are defined. The shell function ${FUNC‐
NAME[$i]} is defined in the file ${BASH_SOURCE[$i]} and called from ${BASH_SOURCE[$i+1]}.
BASH_SUBSHELL
Incremented by one within each subshell or subshell environment when the shell begins exe‐
cuting in that environment. The initial value is 0. If BASH_SUBSHELL is unset, it loses
its special properties, even if it is subsequently reset.
BASH_VERSINFO
A readonly array variable whose members hold version information for this instance of
bash. The values assigned to the array members are as follows:
BASH_VERSINFO[0] The major version number (the release).
BASH_VERSINFO[1] The minor version number (the version).
BASH_VERSINFO[2] The patch level.
BASH_VERSINFO[3] The build version.
BASH_VERSINFO[4] The release status (e.g., beta1).
BASH_VERSINFO[5] The value of MACHTYPE.
BASH_VERSION
Expands to a string describing the version of this instance of bash.
COMP_CWORD
An index into ${COMP_WORDS} of the word containing the current cursor position. This
variable is available only in shell functions invoked by the programmable completion fa‐
cilities (see Programmable Completion below).
COMP_KEY
The key (or final key of a key sequence) used to invoke the current completion function.
COMP_LINE
The current command line. This variable is available only in shell functions and external
commands invoked by the programmable completion facilities (see Programmable Completion
below).
COMP_POINT
The index of the current cursor position relative to the beginning of the current command.
If the current cursor position is at the end of the current command, the value of this
variable is equal to ${#COMP_LINE}. This variable is available only in shell functions
and external commands invoked by the programmable completion facilities (see Programmable
Completion below).
COMP_TYPE
Set to an integer value corresponding to the type of completion attempted that caused a
completion function to be called: TAB, for normal completion, ?, for listing completions
after successive tabs, !, for listing alternatives on partial word completion, @, to list
completions if the word is not unmodified, or %, for menu completion. This variable is
available only in shell functions and external commands invoked by the programmable com‐
pletion facilities (see Programmable Completion below).
COMP_WORDBREAKS
The set of characters that the readline library treats as word separators when performing
word completion. If COMP_WORDBREAKS is unset, it loses its special properties, even if it
is subsequently reset.
COMP_WORDS
An array variable (see Arrays below) consisting of the individual words in the current
command line. The line is split into words as readline would split it, using COMP_WORD‐
BREAKS as described above. This variable is available only in shell functions invoked by
the programmable completion facilities (see Programmable Completion below).
COPROC An array variable (see Arrays below) created to hold the file descriptors for output from
and input to an unnamed coprocess (see Coprocesses above).
DIRSTACK
An array variable (see Arrays below) containing the current contents of the directory
stack. Directories appear in the stack in the order they are displayed by the dirs
builtin. Assigning to members of this array variable may be used to modify directories
already in the stack, but the pushd and popd builtins must be used to add and remove di‐
rectories. Assignment to this variable will not change the current directory. If
DIRSTACK is unset, it loses its special properties, even if it is subsequently reset.
EPOCHREALTIME
Each time this parameter is referenced, it expands to the number of seconds since the Unix
Epoch (see time(3)) as a floating point value with micro-second granularity. Assignments
to EPOCHREALTIME are ignored. If EPOCHREALTIME is unset, it loses its special properties,
even if it is subsequently reset.
EPOCHSECONDS
Each time this parameter is referenced, it expands to the number of seconds since the Unix
Epoch (see time(3)). Assignments to EPOCHSECONDS are ignored. If EPOCHSECONDS is unset,
it loses its special properties, even if it is subsequently reset.
EUID Expands to the effective user ID of the current user, initialized at shell startup. This
variable is readonly.
FUNCNAME
An array variable containing the names of all shell functions currently in the execution
call stack. The element with index 0 is the name of any currently-executing shell func‐
tion. The bottom-most element (the one with the highest index) is "main". This variable
exists only when a shell function is executing. Assignments to FUNCNAME have no effect.
If FUNCNAME is unset, it loses its special properties, even if it is subsequently reset.
This variable can be used with BASH_LINENO and BASH_SOURCE. Each element of FUNCNAME has
corresponding elements in BASH_LINENO and BASH_SOURCE to describe the call stack. For in‐
stance, ${FUNCNAME[$i]} was called from the file ${BASH_SOURCE[$i+1]} at line number
${BASH_LINENO[$i]}. The caller builtin displays the current call stack using this infor‐
mation.
GROUPS An array variable containing the list of groups of which the current user is a member.
Assignments to GROUPS have no effect. If GROUPS is unset, it loses its special proper‐
ties, even if it is subsequently reset.
HISTCMD
The history number, or index in the history list, of the current command. Assignments to
HISTCMD are ignored. If HISTCMD is unset, it loses its special properties, even if it is
subsequently reset.
HOSTNAME
Automatically set to the name of the current host.
HOSTTYPE
Automatically set to a string that uniquely describes the type of machine on which bash is
executing. The default is system-dependent.
LINENO Each time this parameter is referenced, the shell substitutes a decimal number represent‐
ing the current sequential line number (starting with 1) within a script or function.
When not in a script or function, the value substituted is not guaranteed to be meaning‐
ful. If LINENO is unset, it loses its special properties, even if it is subsequently re‐
set.
MACHTYPE
Automatically set to a string that fully describes the system type on which bash is exe‐
cuting, in the standard GNU cpu-company-system format. The default is system-dependent.
MAPFILE
An array variable (see Arrays below) created to hold the text read by the mapfile builtin
when no variable name is supplied.
OLDPWD The previous working directory as set by the cd command.
OPTARG The value of the last option argument processed by the getopts builtin command (see SHELL
BUILTIN COMMANDS below).
OPTIND The index of the next argument to be processed by the getopts builtin command (see SHELL
BUILTIN COMMANDS below).
OSTYPE Automatically set to a string that describes the operating system on which bash is execut‐
ing. The default is system-dependent.
PIPESTATUS
An array variable (see Arrays below) containing a list of exit status values from the pro‐
cesses in the most-recently-executed foreground pipeline (which may contain only a single
command).
PPID The process ID of the shell's parent. This variable is readonly.
PWD The current working directory as set by the cd command.
RANDOM Each time this parameter is referenced, it expands to a random integer between 0 and
32767. Assigning a value to RANDOM initializes (seeds) the sequence of random numbers.
If RANDOM is unset, it loses its special properties, even if it is subsequently reset.
READLINE_LINE
READLINE_MARK
The position of the mark (saved insertion point) in the readline line buffer, for use with
"bind -x" (see SHELL BUILTIN COMMANDS below). The characters between the insertion point
and the mark are often called the region.
READLINE_POINT
The position of the insertion point in the readline line buffer, for use with "bind -x"
(see SHELL BUILTIN COMMANDS below).
REPLY Set to the line of input read by the read builtin command when no arguments are supplied.
SECONDS
Each time this parameter is referenced, the number of seconds since shell invocation is
returned. If a value is assigned to SECONDS, the value returned upon subsequent refer‐
ences is the number of seconds since the assignment plus the value assigned. The number
of seconds at shell invocation and the current time is always determined by querying the
system clock. If SECONDS is unset, it loses its special properties, even if it is subse‐
quently reset.
SHELLOPTS
A colon-separated list of enabled shell options. Each word in the list is a valid argu‐
ment for the -o option to the set builtin command (see SHELL BUILTIN COMMANDS below). The
options appearing in SHELLOPTS are those reported as on by set -o. If this variable is in
the environment when bash starts up, each shell option in the list will be enabled before
reading any startup files. This variable is read-only.
SHLVL Incremented by one each time an instance of bash is started.
SRANDOM
This variable expands to a 32-bit pseudo-random number each time it is referenced. The
random number generator is not linear on systems that support /dev/urandom or arc4random,
so each returned number has no relationship to the numbers preceding it. The random num‐
ber generator cannot be seeded, so assignments to this variable have no effect. If SRAN‐
DOM is unset, it loses its special properties, even if it is subsequently reset.
UID Expands to the user ID of the current user, initialized at shell startup. This variable
is readonly.
The following variables are used by the shell. In some cases, bash assigns a default value to a
variable; these cases are noted below.
BASH_COMPAT
The value is used to set the shell's compatibility level. See SHELL COMPATIBILITY MODE
below for a description of the various compatibility levels and their effects. The value
may be a decimal number (e.g., 4.2) or an integer (e.g., 42) corresponding to the desired
compatibility level. If BASH_COMPAT is unset or set to the empty string, the compatibil‐
ity level is set to the default for the current version. If BASH_COMPAT is set to a value
that is not one of the valid compatibility levels, the shell prints an error message and
sets the compatibility level to the default for the current version. The valid values
correspond to the compatibility levels described below under BSHELLCOMPATIBILITYMODE. For
example, 4.2 and 42 are valid values that correspond to the compat42 shopt option and set
the compatibility level to 42. The current version is also a valid value.
BASH_ENV
If this parameter is set when bash is executing a shell script, its value is interpreted
as a filename containing commands to initialize the shell, as in ~/.bashrc. The value of
BASH_ENV is subjected to parameter expansion, command substitution, and arithmetic expan‐
sion before being interpreted as a filename. PATH is not used to search for the resultant
filename.
BASH_XTRACEFD
If set to an integer corresponding to a valid file descriptor, bash will write the trace
output generated when set -x is enabled to that file descriptor. The file descriptor is
closed when BASH_XTRACEFD is unset or assigned a new value. Unsetting BASH_XTRACEFD or
assigning it the empty string causes the trace output to be sent to the standard error.
Note that setting BASH_XTRACEFD to 2 (the standard error file descriptor) and then unset‐
ting it will result in the standard error being closed.
CDPATH The search path for the cd command. This is a colon-separated list of directories in
which the shell looks for destination directories specified by the cd command. A sample
value is ".:~:/usr".
CHILD_MAX
Set the number of exited child status values for the shell to remember. Bash will not al‐
low this value to be decreased below a POSIX-mandated minimum, and there is a maximum
value (currently 8192) that this may not exceed. The minimum value is system-dependent.
COLUMNS
Used by the select compound command to determine the terminal width when printing selec‐
tion lists. Automatically set if the checkwinsize option is enabled or in an interactive
shell upon receipt of a SIGWINCH.
COMPREPLY
An array variable from which bash reads the possible completions generated by a shell
function invoked by the programmable completion facility (see Programmable Completion be‐
low). Each array element contains one possible completion.
EMACS If bash finds this variable in the environment when the shell starts with value "t", it
assumes that the shell is running in an Emacs shell buffer and disables line editing.
ENV Expanded and executed similarly to BASH_ENV (see INVOCATION above) when an interactive
shell is invoked in posix mode.
EXECIGNORE
A colon-separated list of shell patterns (see Pattern Matching) defining the list of file‐
names to be ignored by command search using PATH. Files whose full pathnames match one of
these patterns are not considered executable files for the purposes of completion and com‐
mand execution via PATH lookup. This does not affect the behavior of the [, test, and [[
commands. Full pathnames in the command hash table are not subject to EXECIGNORE. Use
this variable to ignore shared library files that have the executable bit set, but are not
executable files. The pattern matching honors the setting of the extglob shell option.
FCEDIT The default editor for the fc builtin command.
FIGNORE
A colon-separated list of suffixes to ignore when performing filename completion (see
READLINE below). A filename whose suffix matches one of the entries in FIGNORE is ex‐
cluded from the list of matched filenames. A sample value is ".o:~" (Quoting is needed
when assigning a value to this variable, which contains tildes).
FUNCNEST
If set to a numeric value greater than 0, defines a maximum function nesting level. Func‐
tion invocations that exceed this nesting level will cause the current command to abort.
GLOBIGNORE
A colon-separated list of patterns defining the set of file names to be ignored by path‐
name expansion. If a file name matched by a pathname expansion pattern also matches one
of the patterns in GLOBIGNORE, it is removed from the list of matches.
HISTCONTROL
A colon-separated list of values controlling how commands are saved on the history list.
If the list of values includes ignorespace, lines which begin with a space character are
not saved in the history list. A value of ignoredups causes lines matching the previous
history entry to not be saved. A value of ignoreboth is shorthand for ignorespace and ig‐
noredups. A value of erasedups causes all previous lines matching the current line to be
removed from the history list before that line is saved. Any value not in the above list
is ignored. If HISTCONTROL is unset, or does not include a valid value, all lines read by
the shell parser are saved on the history list, subject to the value of HISTIGNORE. The
second and subsequent lines of a multi-line compound command are not tested, and are added
to the history regardless of the value of HISTCONTROL.
HISTFILE
The name of the file in which command history is saved (see HISTORY below). The default
value is ~/.bash_history. If unset, the command history is not saved when a shell exits.
HISTFILESIZE
The maximum number of lines contained in the history file. When this variable is assigned
a value, the history file is truncated, if necessary, to contain no more than that number
of lines by removing the oldest entries. The history file is also truncated to this size
after writing it when a shell exits. If the value is 0, the history file is truncated to
zero size. Non-numeric values and numeric values less than zero inhibit truncation. The
shell sets the default value to the value of HISTSIZE after reading any startup files.
HISTIGNORE
A colon-separated list of patterns used to decide which command lines should be saved on
the history list. Each pattern is anchored at the beginning of the line and must match
the complete line (no implicit `*' is appended). Each pattern is tested against the line
after the checks specified by HISTCONTROL are applied. In addition to the normal shell
pattern matching characters, `&' matches the previous history line. `&' may be escaped
using a backslash; the backslash is removed before attempting a match. The second and
subsequent lines of a multi-line compound command are not tested, and are added to the
history regardless of the value of HISTIGNORE. The pattern matching honors the setting of
the extglob shell option.
HISTSIZE
The number of commands to remember in the command history (see HISTORY below). If the
value is 0, commands are not saved in the history list. Numeric values less than zero re‐
sult in every command being saved on the history list (there is no limit). The shell sets
the default value to 500 after reading any startup files.
HISTTIMEFORMAT
If this variable is set and not null, its value is used as a format string for strftime(3)
to print the time stamp associated with each history entry displayed by the history
builtin. If this variable is set, time stamps are written to the history file so they may
be preserved across shell sessions. This uses the history comment character to distin‐
guish timestamps from other history lines.
HOME The home directory of the current user; the default argument for the cd builtin command.
The value of this variable is also used when performing tilde expansion.
HOSTFILE
Contains the name of a file in the same format as /etc/hosts that should be read when the
shell needs to complete a hostname. The list of possible hostname completions may be
changed while the shell is running; the next time hostname completion is attempted after
the value is changed, bash adds the contents of the new file to the existing list. If
HOSTFILE is set, but has no value, or does not name a readable file, bash attempts to read
/etc/hosts to obtain the list of possible hostname completions. When HOSTFILE is unset,
the hostname list is cleared.
IFS The Internal Field Separator that is used for word splitting after expansion and to split
lines into words with the read builtin command. The default value is ``<space><tab><new‐
line>.
IGNOREEOF
Controls the action of an interactive shell on receipt of an EOF character as the sole in‐
put. If set, the value is the number of consecutive EOF characters which must be typed as
the first characters on an input line before bash exits. If the variable exists but does
not have a numeric value, or has no value, the default value is 10. If it does not exist,
EOF signifies the end of input to the shell.
INPUTRC
The filename for the readline startup file, overriding the default of ~/.inputrc (see
READLINE below).
INSIDE_EMACS
If this variable appears in the environment when the shell starts, bash assumes that it is
running inside an Emacs shell buffer and may disable line editing, depending on the value
of TERM.
LANG Used to determine the locale category for any category not specifically selected with a
variable starting with LC_.
LC_ALL This variable overrides the value of LANG and any other LC_ variable specifying a locale
category.
LC_COLLATE
This variable determines the collation order used when sorting the results of pathname ex‐
pansion, and determines the behavior of range expressions, equivalence classes, and col‐
lating sequences within pathname expansion and pattern matching.
LC_CTYPE
This variable determines the interpretation of characters and the behavior of character
classes within pathname expansion and pattern matching.
LC_MESSAGES
This variable determines the locale used to translate double-quoted strings preceded by a
$.
LC_NUMERIC
This variable determines the locale category used for number formatting.
LC_TIME
This variable determines the locale category used for data and time formatting.
LINES Used by the select compound command to determine the column length for printing selection
lists. Automatically set if the checkwinsize option is enabled or in an interactive shell
upon receipt of a SIGWINCH.
MAIL If this parameter is set to a file or directory name and the MAILPATH variable is not set,
bash informs the user of the arrival of mail in the specified file or Maildir-format di‐
rectory.
MAILCHECK
Specifies how often (in seconds) bash checks for mail. The default is 60 seconds. When
it is time to check for mail, the shell does so before displaying the primary prompt. If
this variable is unset, or set to a value that is not a number greater than or equal to
zero, the shell disables mail checking.
MAILPATH
A colon-separated list of filenames to be checked for mail. The message to be printed
when mail arrives in a particular file may be specified by separating the filename from
the message with a `?'. When used in the text of the message, $_ expands to the name of
the current mailfile. Example:
MAILPATH='/var/mail/bfox?"You have mail":~/shell-mail?"$_ has mail!"'
Bash can be configured to supply a default value for this variable (there is no value by
default), but the location of the user mail files that it uses is system dependent (e.g.,
/var/mail/$USER).
OPTERR If set to the value 1, bash displays error messages generated by the getopts builtin com‐
mand (see SHELL BUILTIN COMMANDS below). OPTERR is initialized to 1 each time the shell
is invoked or a shell script is executed.
PATH The search path for commands. It is a colon-separated list of directories in which the
shell looks for commands (see COMMAND EXECUTION below). A zero-length (null) directory
name in the value of PATH indicates the current directory. A null directory name may ap‐
pear as two adjacent colons, or as an initial or trailing colon. The default path is sys‐
tem-dependent, and is set by the administrator who installs bash. A common value is
``/usr/local/bin:/usr/local/sbin:/usr/bin:/usr/sbin:/bin:/sbin.
POSIXLY_CORRECT
If this variable is in the environment when bash starts, the shell enters posix mode be‐
fore reading the startup files, as if the --posix invocation option had been supplied. If
it is set while the shell is running, bash enables posix mode, as if the command set -o
posix had been executed. When the shell enters posix mode, it sets this variable if it
was not already set.
PROMPT_COMMAND
If this variable is set, and is an array, the value of each set element is executed as a
command prior to issuing each primary prompt. If this is set but not an array variable,
its value is used as a command to execute instead.
PROMPT_DIRTRIM
If set to a number greater than zero, the value is used as the number of trailing direc‐
tory components to retain when expanding the \w and \W prompt string escapes (see PROMPT‐
ING below). Characters removed are replaced with an ellipsis.
PS0 The value of this parameter is expanded (see PROMPTING below) and displayed by interactive
shells after reading a command and before the command is executed.
PS1 The value of this parameter is expanded (see PROMPTING below) and used as the primary
prompt string. The default value is ``\s-\v\$ .
PS2 The value of this parameter is expanded as with PS1 and used as the secondary prompt
string. The default is ``> .
PS3 The value of this parameter is used as the prompt for the select command (see SHELL GRAM‐
MAR above).
PS4 The value of this parameter is expanded as with PS1 and the value is printed before each
command bash displays during an execution trace. The first character of the expanded
value of PS4 is replicated multiple times, as necessary, to indicate multiple levels of
indirection. The default is ``+ .
SHELL This variable expands to the full pathname to the shell. If it is not set when the shell
starts, bash assigns to it the full pathname of the current user's login shell.
TIMEFORMAT
The value of this parameter is used as a format string specifying how the timing informa‐
tion for pipelines prefixed with the time reserved word should be displayed. The % char‐
acter introduces an escape sequence that is expanded to a time value or other information.
The escape sequences and their meanings are as follows; the braces denote optional por‐
tions.
%% A literal %.
%[p][l]R The elapsed time in seconds.
%[p][l]U The number of CPU seconds spent in user mode.
%[p][l]S The number of CPU seconds spent in system mode.
%P The CPU percentage, computed as (%U + %S) / %R.
The optional p is a digit specifying the precision, the number of fractional digits after
a decimal point. A value of 0 causes no decimal point or fraction to be output. At most
three places after the decimal point may be specified; values of p greater than 3 are
changed to 3. If p is not specified, the value 3 is used.
The optional l specifies a longer format, including minutes, of the form MMmSS.FFs. The
value of p determines whether or not the fraction is included.
If this variable is not set, bash acts as if it had the value
$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'. If the value is null, no timing information is
displayed. A trailing newline is added when the format string is displayed.
TMOUT If set to a value greater than zero, TMOUT is treated as the default timeout for the read
builtin. The select command terminates if input does not arrive after TMOUT seconds when
input is coming from a terminal. In an interactive shell, the value is interpreted as the
number of seconds to wait for a line of input after issuing the primary prompt. Bash ter‐
minates after waiting for that number of seconds if a complete line of input does not ar‐
rive.
TMPDIR If set, bash uses its value as the name of a directory in which bash creates temporary
files for the shell's use.
auto_resume
This variable controls how the shell interacts with the user and job control. If this
variable is set, single word simple commands without redirections are treated as candi‐
dates for resumption of an existing stopped job. There is no ambiguity allowed; if there
is more than one job beginning with the string typed, the job most recently accessed is
selected. The name of a stopped job, in this context, is the command line used to start
it. If set to the value exact, the string supplied must match the name of a stopped job
exactly; if set to substring, the string supplied needs to match a substring of the name
of a stopped job. The substring value provides functionality analogous to the %? job
identifier (see JOB CONTROL below). If set to any other value, the supplied string must
be a prefix of a stopped job's name; this provides functionality analogous to the %string
job identifier.
histchars
The two or three characters which control history expansion and tokenization (see HISTORY
EXPANSION below). The first character is the history expansion character, the character
which signals the start of a history expansion, normally `!'. The second character is the
quick substitution character, which is used as shorthand for re-running the previous com‐
mand entered, substituting one string for another in the command. The default is `^'.
The optional third character is the character which indicates that the remainder of the
line is a comment when found as the first character of a word, normally `#'. The history
comment character causes history substitution to be skipped for the remaining words on the
line. It does not necessarily cause the shell parser to treat the rest of the line as a
comment.
Arrays
Bash provides one-dimensional indexed and associative array variables. Any variable may be used
as an indexed array; the declare builtin will explicitly declare an array. There is no maximum
limit on the size of an array, nor any requirement that members be indexed or assigned contigu‐
ously. Indexed arrays are referenced using integers (including arithmetic expressions) and are
zero-based; associative arrays are referenced using arbitrary strings. Unless otherwise noted,
indexed array indices must be non-negative integers.
An indexed array is created automatically if any variable is assigned to using the syntax
name[subscript]=value. The subscript is treated as an arithmetic expression that must evaluate
to a number. To explicitly declare an indexed array, use declare -a name (see SHELL BUILTIN COM‐
MANDS below). declare -a name[subscript] is also accepted; the subscript is ignored.
Associative arrays are created using declare -A name.
Attributes may be specified for an array variable using the declare and readonly builtins. Each
attribute applies to all members of an array.
Arrays are assigned to using compound assignments of the form name=(value1 ... valuen), where
each value may be of the form [subscript]=string. Indexed array assignments do not require any‐
thing but string. Each value in the list is expanded using all the shell expansions described
below under EXPANSION. When assigning to indexed arrays, if the optional brackets and subscript
are supplied, that index is assigned to; otherwise the index of the element assigned is the last
index assigned to by the statement plus one. Indexing starts at zero.
When assigning to an associative array, the words in a compound assignment may be either assign‐
ment statements, for which the subscript is required, or a list of words that is interpreted as a
sequence of alternating keys and values: name=( key1 value1 key2 value2 ...). These are treated
identically to name=( [key1]=value1 [key2]=value2 ...). The first word in the list determines
how the remaining words are interpreted; all assignments in a list must be of the same type.
When using key/value pairs, the keys may not be missing or empty; a final missing value is
treated like the empty string.
This syntax is also accepted by the declare builtin. Individual array elements may be assigned
to using the name[subscript]=value syntax introduced above. When assigning to an indexed array,
if name is subscripted by a negative number, that number is interpreted as relative to one
greater than the maximum index of name, so negative indices count back from the end of the array,
and an index of -1 references the last element.
Any element of an array may be referenced using ${name[subscript]}. The braces are required to
avoid conflicts with pathname expansion. If subscript is @ or *, the word expands to all members
of name. These subscripts differ only when the word appears within double quotes. If the word
is double-quoted, ${name[*]} expands to a single word with the value of each array member sepa‐
rated by the first character of the IFS special variable, and ${name[@]} expands each element of
name to a separate word. When there are no array members, ${name[@]} expands to nothing. If the
double-quoted expansion occurs within a word, the expansion of the first parameter is joined with
the beginning part of the original word, and the expansion of the last parameter is joined with
the last part of the original word. This is analogous to the expansion of the special parameters
* and @ (see Special Parameters above). ${#name[subscript]} expands to the length of ${name[sub‐
script]}. If subscript is * or @, the expansion is the number of elements in the array. If the
subscript used to reference an element of an indexed array evaluates to a number less than zero,
it is interpreted as relative to one greater than the maximum index of the array, so negative in‐
dices count back from the end of the array, and an index of -1 references the last element.
Referencing an array variable without a subscript is equivalent to referencing the array with a
subscript of 0. Any reference to a variable using a valid subscript is legal, and bash will cre‐
ate an array if necessary.
An array variable is considered set if a subscript has been assigned a value. The null string is
a valid value.
It is possible to obtain the keys (indices) of an array as well as the values. ${!name[@]} and
${!name[*]} expand to the indices assigned in array variable name. The treatment when in double
quotes is similar to the expansion of the special parameters @ and * within double quotes.
The unset builtin is used to destroy arrays. unset name[subscript] destroys the array element at
index subscript, for both indexed and associative arrays. Negative subscripts to indexed arrays
are interpreted as described above. Unsetting the last element of an array variable does not un‐
set the variable. unset name, where name is an array, or unset name[subscript], where subscript
is * or @, removes the entire array.
When using a variable name with a subscript as an argument to a command, such as with unset,
without using the word expansion syntax described above, the argument is subject to pathname ex‐
pansion. If pathname expansion is not desired, the argument should be quoted.
The declare, local, and readonly builtins each accept a -a option to specify an indexed array and
a -A option to specify an associative array. If both options are supplied, -A takes precedence.
The read builtin accepts a -a option to assign a list of words read from the standard input to an
array. The set and declare builtins display array values in a way that allows them to be reused
as assignments.
EXPANSION
Expansion is performed on the command line after it has been split into words. There are seven
kinds of expansion performed: brace expansion, tilde expansion, parameter and variable expansion,
command substitution, arithmetic expansion, word splitting, and pathname expansion.
The order of expansions is: brace expansion; tilde expansion, parameter and variable expansion,
arithmetic expansion, and command substitution (done in a left-to-right fashion); word splitting;
and pathname expansion.
On systems that can support it, there is an additional expansion available: process substitution.
This is performed at the same time as tilde, parameter, variable, and arithmetic expansion and
command substitution.
After these expansions are performed, quote characters present in the original word are removed
unless they have been quoted themselves (quote removal).
Only brace expansion, word splitting, and pathname expansion can increase the number of words of
the expansion; other expansions expand a single word to a single word. The only exceptions to
this are the expansions of "$@" and "${name[@]}", and, in most cases, $* and ${name[*]} as ex‐
plained above (see PARAMETERS).
Brace Expansion
Brace expansion is a mechanism by which arbitrary strings may be generated. This mechanism is
similar to pathname expansion, but the filenames generated need not exist. Patterns to be brace
expanded take the form of an optional preamble, followed by either a series of comma-separated
strings or a sequence expression between a pair of braces, followed by an optional postscript.
The preamble is prefixed to each string contained within the braces, and the postscript is then
appended to each resulting string, expanding left to right.
Brace expansions may be nested. The results of each expanded string are not sorted; left to
right order is preserved. For example, a{d,c,b}e expands into `ade ace abe'.
A sequence expression takes the form {x..y[..incr]}, where x and y are either integers or single
characters, and incr, an optional increment, is an integer. When integers are supplied, the ex‐
pression expands to each number between x and y, inclusive. Supplied integers may be prefixed
with 0 to force each term to have the same width. When either x or y begins with a zero, the
shell attempts to force all generated terms to contain the same number of digits, zero-padding
where necessary. When characters are supplied, the expression expands to each character lexico‐
graphically between x and y, inclusive, using the default C locale. Note that both x and y must
be of the same type. When the increment is supplied, it is used as the difference between each
term. The default increment is 1 or -1 as appropriate.
Brace expansion is performed before any other expansions, and any characters special to other ex‐
pansions are preserved in the result. It is strictly textual. Bash does not apply any syntactic
interpretation to the context of the expansion or the text between the braces.
A correctly-formed brace expansion must contain unquoted opening and closing braces, and at least
one unquoted comma or a valid sequence expression. Any incorrectly formed brace expansion is
left unchanged. A { or , may be quoted with a backslash to prevent its being considered part of
a brace expression. To avoid conflicts with parameter expansion, the string ${ is not considered
eligible for brace expansion, and inhibits brace expansion until the closing }.
This construct is typically used as shorthand when the common prefix of the strings to be gener‐
ated is longer than in the above example:
mkdir /usr/local/src/bash/{old,new,dist,bugs}
or
chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}
Brace expansion introduces a slight incompatibility with historical versions of sh. sh does not
treat opening or closing braces specially when they appear as part of a word, and preserves them
in the output. Bash removes braces from words as a consequence of brace expansion. For example,
a word entered to sh as file{1,2} appears identically in the output. The same word is output as
file1 file2 after expansion by bash. If strict compatibility with sh is desired, start bash with
the +B option or disable brace expansion with the +B option to the set command (see SHELL BUILTIN
COMMANDS below).
Tilde Expansion
If a word begins with an unquoted tilde character (`~'), all of the characters preceding the
first unquoted slash (or all characters, if there is no unquoted slash) are considered a tilde-
prefix. If none of the characters in the tilde-prefix are quoted, the characters in the tilde-
prefix following the tilde are treated as a possible login name. If this login name is the null
string, the tilde is replaced with the value of the shell parameter HOME. If HOME is unset, the
home directory of the user executing the shell is substituted instead. Otherwise, the tilde-pre‐
fix is replaced with the home directory associated with the specified login name.
If the tilde-prefix is a `~+', the value of the shell variable PWD replaces the tilde-prefix. If
the tilde-prefix is a `~-', the value of the shell variable OLDPWD, if it is set, is substituted.
If the characters following the tilde in the tilde-prefix consist of a number N, optionally pre‐
fixed by a `+' or a `-', the tilde-prefix is replaced with the corresponding element from the di‐
rectory stack, as it would be displayed by the dirs builtin invoked with the tilde-prefix as an
argument. If the characters following the tilde in the tilde-prefix consist of a number without
a leading `+' or `-', `+' is assumed.
If the login name is invalid, or the tilde expansion fails, the word is unchanged.
Each variable assignment is checked for unquoted tilde-prefixes immediately following a : or the
first =. In these cases, tilde expansion is also performed. Consequently, one may use filenames
with tildes in assignments to PATH, MAILPATH, and CDPATH, and the shell assigns the expanded
value.
Bash also performs tilde expansion on words satisfying the conditions of variable assignments (as
described above under PARAMETERS) when they appear as arguments to simple commands. Bash does
not do this, except for the declaration commands listed above, when in posix mode.
Parameter Expansion
The `$' character introduces parameter expansion, command substitution, or arithmetic expansion.
The parameter name or symbol to be expanded may be enclosed in braces, which are optional but
serve to protect the variable to be expanded from characters immediately following it which could
be interpreted as part of the name.
When braces are used, the matching ending brace is the first `}' not escaped by a backslash or
within a quoted string, and not within an embedded arithmetic expansion, command substitution, or
parameter expansion.
${parameter}
The value of parameter is substituted. The braces are required when parameter is a posi‐
tional parameter with more than one digit, or when parameter is followed by a character
which is not to be interpreted as part of its name. The parameter is a shell parameter as
described above PARAMETERS) or an array reference (Arrays).
If the first character of parameter is an exclamation point (!), and parameter is not a nameref,
it introduces a level of indirection. Bash uses the value formed by expanding the rest of param‐
eter as the new parameter; this is then expanded and that value is used in the rest of the expan‐
sion, rather than the expansion of the original parameter. This is known as indirect expansion.
The value is subject to tilde expansion, parameter expansion, command substitution, and arith‐
metic expansion. If parameter is a nameref, this expands to the name of the parameter referenced
by parameter instead of performing the complete indirect expansion. The exceptions to this are
the expansions of ${!prefix*} and ${!name[@]} described below. The exclamation point must imme‐
diately follow the left brace in order to introduce indirection.
In each of the cases below, word is subject to tilde expansion, parameter expansion, command sub‐
stitution, and arithmetic expansion.
When not performing substring expansion, using the forms documented below (e.g., :-), bash tests
for a parameter that is unset or null. Omitting the colon results in a test only for a parameter
that is unset.
${parameter:-word}
Use Default Values. If parameter is unset or null, the expansion of word is substituted.
Otherwise, the value of parameter is substituted.
${parameter:=word}
Assign Default Values. If parameter is unset or null, the expansion of word is assigned
to parameter. The value of parameter is then substituted. Positional parameters and spe‐
cial parameters may not be assigned to in this way.
${parameter:?word}
Display Error if Null or Unset. If parameter is null or unset, the expansion of word (or
a message to that effect if word is not present) is written to the standard error and the
shell, if it is not interactive, exits. Otherwise, the value of parameter is substituted.
${parameter:+word}
Use Alternate Value. If parameter is null or unset, nothing is substituted, otherwise the
expansion of word is substituted.
${parameter:offset}
${parameter:offset:length}
Substring Expansion. Expands to up to length characters of the value of parameter start‐
ing at the character specified by offset. If parameter is @, an indexed array subscripted
by @ or *, or an associative array name, the results differ as described below. If length
is omitted, expands to the substring of the value of parameter starting at the character
specified by offset and extending to the end of the value. length and offset are arith‐
metic expressions (see ARITHMETIC EVALUATION below).
If offset evaluates to a number less than zero, the value is used as an offset in charac‐
ters from the end of the value of parameter. If length evaluates to a number less than
zero, it is interpreted as an offset in characters from the end of the value of parameter
rather than a number of characters, and the expansion is the characters between offset and
that result. Note that a negative offset must be separated from the colon by at least one
space to avoid being confused with the :- expansion.
If parameter is @, the result is length positional parameters beginning at offset. A neg‐
ative offset is taken relative to one greater than the greatest positional parameter, so
an offset of -1 evaluates to the last positional parameter. It is an expansion error if
length evaluates to a number less than zero.
If parameter is an indexed array name subscripted by @ or *, the result is the length mem‐
bers of the array beginning with ${parameter[offset]}. A negative offset is taken rela‐
tive to one greater than the maximum index of the specified array. It is an expansion er‐
ror if length evaluates to a number less than zero.
Substring expansion applied to an associative array produces undefined results.
Substring indexing is zero-based unless the positional parameters are used, in which case
the indexing starts at 1 by default. If offset is 0, and the positional parameters are
used, $0 is prefixed to the list.
${!prefix*}
${!prefix@}
Names matching prefix. Expands to the names of variables whose names begin with prefix,
separated by the first character of the IFS special variable. When @ is used and the ex‐
pansion appears within double quotes, each variable name expands to a separate word.
${!name[@]}
${!name[*]}
List of array keys. If name is an array variable, expands to the list of array indices
(keys) assigned in name. If name is not an array, expands to 0 if name is set and null
otherwise. When @ is used and the expansion appears within double quotes, each key ex‐
pands to a separate word.
${#parameter}
Parameter length. The length in characters of the value of parameter is substituted. If
parameter is * or @, the value substituted is the number of positional parameters. If pa‐
rameter is an array name subscripted by * or @, the value substituted is the number of el‐
ements in the array. If parameter is an indexed array name subscripted by a negative num‐
ber, that number is interpreted as relative to one greater than the maximum index of pa‐
rameter, so negative indices count back from the end of the array, and an index of -1 ref‐
erences the last element.
${parameter#word}
${parameter##word}
Remove matching prefix pattern. The word is expanded to produce a pattern just as in
pathname expansion, and matched against the expanded value of parameter using the rules
described under Pattern Matching below. If the pattern matches the beginning of the value
of parameter, then the result of the expansion is the expanded value of parameter with the
shortest matching pattern (the ``# case) or the longest matching pattern (the ``##
case) deleted. If parameter is @ or *, the pattern removal operation is applied to each
positional parameter in turn, and the expansion is the resultant list. If parameter is an
array variable subscripted with @ or *, the pattern removal operation is applied to each
member of the array in turn, and the expansion is the resultant list.
${parameter%word}
${parameter%%word}
Remove matching suffix pattern. The word is expanded to produce a pattern just as in
pathname expansion, and matched against the expanded value of parameter using the rules
described under Pattern Matching below. If the pattern matches a trailing portion of the
expanded value of parameter, then the result of the expansion is the expanded value of pa‐
rameter with the shortest matching pattern (the ``% case) or the longest matching pat‐
tern (the ``%% case) deleted. If parameter is @ or *, the pattern removal operation is
applied to each positional parameter in turn, and the expansion is the resultant list. If
parameter is an array variable subscripted with @ or *, the pattern removal operation is
applied to each member of the array in turn, and the expansion is the resultant list.
${parameter/pattern/string}
Pattern substitution. The pattern is expanded to produce a pattern just as in pathname
expansion, Parameter is expanded and the longest match of pattern against its value is re‐
placed with string. The match is performed using the rules described under Pattern Match‐
ing below. If pattern begins with /, all matches of pattern are replaced with string.
Normally only the first match is replaced. If pattern begins with #, it must match at the
beginning of the expanded value of parameter. If pattern begins with %, it must match at
the end of the expanded value of parameter. If string is null, matches of pattern are
deleted and the / following pattern may be omitted. If the nocasematch shell option is
enabled, the match is performed without regard to the case of alphabetic characters. If
parameter is @ or *, the substitution operation is applied to each positional parameter in
turn, and the expansion is the resultant list. If parameter is an array variable sub‐
scripted with @ or *, the substitution operation is applied to each member of the array in
turn, and the expansion is the resultant list.
${parameter^pattern}
${parameter^^pattern}
${parameter,pattern}
${parameter,,pattern}
Case modification. This expansion modifies the case of alphabetic characters in parame‐
ter. The pattern is expanded to produce a pattern just as in pathname expansion. Each
character in the expanded value of parameter is tested against pattern, and, if it matches
the pattern, its case is converted. The pattern should not attempt to match more than one
character. The ^ operator converts lowercase letters matching pattern to uppercase; the ,
operator converts matching uppercase letters to lowercase. The ^^ and ,, expansions con‐
vert each matched character in the expanded value; the ^ and , expansions match and con‐
vert only the first character in the expanded value. If pattern is omitted, it is treated
like a ?, which matches every character. If parameter is @ or *, the case modification
operation is applied to each positional parameter in turn, and the expansion is the resul‐
tant list. If parameter is an array variable subscripted with @ or *, the case modifica‐
tion operation is applied to each member of the array in turn, and the expansion is the
resultant list.
${parameter@operator}
Parameter transformation. The expansion is either a transformation of the value of param‐
eter or information about parameter itself, depending on the value of operator. Each op‐
erator is a single letter:
U The expansion is a string that is the value of parameter with lowercase alphabetic
characters converted to uppercase.
u The expansion is a string that is the value of parameter with the first character
converted to uppercase, if it is alphabetic.
L The expansion is a string that is the value of parameter with uppercase alphabetic
characters converted to lowercase.
Q The expansion is a string that is the value of parameter quoted in a format that
can be reused as input.
E The expansion is a string that is the value of parameter with backslash escape se‐
quences expanded as with the $'...' quoting mechanism.
P The expansion is a string that is the result of expanding the value of parameter as
if it were a prompt string (see PROMPTING below).
A The expansion is a string in the form of an assignment statement or declare command
that, if evaluated, will recreate parameter with its attributes and value.
K Produces a possibly-quoted version of the value of parameter, except that it prints
the values of indexed and associative arrays as a sequence of quoted key-value
pairs (see Arrays above).
a The expansion is a string consisting of flag values representing parameter's at‐
tributes.
If parameter is @ or *, the operation is applied to each positional parameter in turn, and
the expansion is the resultant list. If parameter is an array variable subscripted with @
or *, the operation is applied to each member of the array in turn, and the expansion is
the resultant list.
The result of the expansion is subject to word splitting and pathname expansion as de‐
scribed below.
Command Substitution
Command substitution allows the output of a command to replace the command name. There are two
forms:
$(command)
or
`command`
Bash performs the expansion by executing command in a subshell environment and replacing the com‐
mand substitution with the standard output of the command, with any trailing newlines deleted.
Embedded newlines are not deleted, but they may be removed during word splitting. The command
substitution $(cat file) can be replaced by the equivalent but faster $(< file).
When the old-style backquote form of substitution is used, backslash retains its literal meaning
except when followed by $, `, or \. The first backquote not preceded by a backslash terminates
the command substitution. When using the $(command) form, all characters between the parentheses
make up the command; none are treated specially.
Command substitutions may be nested. To nest when using the backquoted form, escape the inner
backquotes with backslashes.
If the substitution appears within double quotes, word splitting and pathname expansion are not
performed on the results.
Arithmetic Expansion
Arithmetic expansion allows the evaluation of an arithmetic expression and the substitution of
the result. The format for arithmetic expansion is:
$((expression))
The old format $[expression] is deprecated and will be removed in upcoming versions of bash.
The expression is treated as if it were within double quotes, but a double quote inside the
parentheses is not treated specially. All tokens in the expression undergo parameter and vari‐
able expansion, command substitution, and quote removal. The result is treated as the arithmetic
expression to be evaluated. Arithmetic expansions may be nested.
The evaluation is performed according to the rules listed below under ARITHMETIC EVALUATION. If
expression is invalid, bash prints a message indicating failure and no substitution occurs.
Process Substitution
Process substitution allows a process's input or output to be referred to using a filename. It
takes the form of <(list) or >(list). The process list is run asynchronously, and its input or
output appears as a filename. This filename is passed as an argument to the current command as
the result of the expansion. If the >(list) form is used, writing to the file will provide input
for list. If the <(list) form is used, the file passed as an argument should be read to obtain
the output of list. Process substitution is supported on systems that support named pipes (FI‐
FOs) or the /dev/fd method of naming open files.
When available, process substitution is performed simultaneously with parameter and variable ex‐
pansion, command substitution, and arithmetic expansion.
Word Splitting
The shell scans the results of parameter expansion, command substitution, and arithmetic expan‐
sion that did not occur within double quotes for word splitting.
The shell treats each character of IFS as a delimiter, and splits the results of the other expan‐
sions into words using these characters as field terminators. If IFS is unset, or its value is
exactly <space><tab><newline>, the default, then sequences of <space>, <tab>, and <newline> at
the beginning and end of the results of the previous expansions are ignored, and any sequence of
IFS characters not at the beginning or end serves to delimit words. If IFS has a value other
than the default, then sequences of the whitespace characters space, tab, and newline are ignored
at the beginning and end of the word, as long as the whitespace character is in the value of IFS
(an IFS whitespace character). Any character in IFS that is not IFS whitespace, along with any
adjacent IFS whitespace characters, delimits a field. A sequence of IFS whitespace characters is
also treated as a delimiter. If the value of IFS is null, no word splitting occurs.
Explicit null arguments ("" or ) are retained and passed to commands as empty strings. Un‐
quoted implicit null arguments, resulting from the expansion of parameters that have no values,
are removed. If a parameter with no value is expanded within double quotes, a null argument re‐
sults and is retained and passed to a command as an empty string. When a quoted null argument
appears as part of a word whose expansion is non-null, the null argument is removed. That is,
the word -d becomes -d after word splitting and null argument removal.
Note that if no expansion occurs, no splitting is performed.
Pathname Expansion
After word splitting, unless the -f option has been set, bash scans each word for the characters
*, ?, and [. If one of these characters appears, and is not quoted, then the word is regarded as
a pattern, and replaced with an alphabetically sorted list of filenames matching the pattern (see
Pattern Matching below). If no matching filenames are found, and the shell option nullglob is
not enabled, the word is left unchanged. If the nullglob option is set, and no matches are
found, the word is removed. If the failglob shell option is set, and no matches are found, an
error message is printed and the command is not executed. If the shell option nocaseglob is en‐
abled, the match is performed without regard to the case of alphabetic characters. Note that
when using range expressions like [a-z] (see below), letters of the other case may be included,
depending on the setting of LC_COLLATE. When a pattern is used for pathname expansion, the char‐
acter ``. at the start of a name or immediately following a slash must be matched explicitly,
unless the shell option dotglob is set. The filenames ``. and ``.. must always be matched
explicitly, even if dotglob is set. In other cases, the ``. character is not treated spe‐
cially. When matching a pathname, the slash character must always be matched explicitly by a
slash in the pattern, but in other matching contexts it can be matched by a special pattern char‐
acter as described below under Pattern Matching. See the description of shopt below under SHELL
BUILTIN COMMANDS for a description of the nocaseglob, nullglob, failglob, and dotglob shell op‐
tions.
The GLOBIGNORE shell variable may be used to restrict the set of file names matching a pattern.
If GLOBIGNORE is set, each matching file name that also matches one of the patterns in GLOBIGNORE
is removed from the list of matches. If the nocaseglob option is set, the matching against the
patterns in GLOBIGNORE is performed without regard to case. The filenames ``. and ``.. are
always ignored when GLOBIGNORE is set and not null. However, setting GLOBIGNORE to a non-null
value has the effect of enabling the dotglob shell option, so all other filenames beginning with
a ``. will match. To get the old behavior of ignoring filenames beginning with a ``., make
``.* one of the patterns in GLOBIGNORE. The dotglob option is disabled when GLOBIGNORE is un‐
set. The pattern matching honors the setting of the extglob shell option.
Pattern Matching
Any character that appears in a pattern, other than the special pattern characters described be‐
low, matches itself. The NUL character may not occur in a pattern. A backslash escapes the fol‐
lowing character; the escaping backslash is discarded when matching. The special pattern charac‐
ters must be quoted if they are to be matched literally.
The special pattern characters have the following meanings:
* Matches any string, including the null string. When the globstar shell option is
enabled, and * is used in a pathname expansion context, two adjacent *s used as a
single pattern will match all files and zero or more directories and subdirecto‐
ries. If followed by a /, two adjacent *s will match only directories and subdi‐
rectories.
? Matches any single character.
[...] Matches any one of the enclosed characters. A pair of characters separated by a
hyphen denotes a range expression; any character that falls between those two char‐
acters, inclusive, using the current locale's collating sequence and character set,
is matched. If the first character following the [ is a ! or a ^ then any charac‐
ter not enclosed is matched. The sorting order of characters in range expressions
is determined by the current locale and the values of the LC_COLLATE or LC_ALL
shell variables, if set. To obtain the traditional interpretation of range expres‐
sions, where [a-d] is equivalent to [abcd], set value of the LC_ALL shell variable
to C, or enable the globasciiranges shell option. A - may be matched by including
it as the first or last character in the set. A ] may be matched by including it
as the first character in the set.
Within [ and ], character classes can be specified using the syntax [:class:],
where class is one of the following classes defined in the POSIX standard:
alnum alpha ascii blank cntrl digit graph lower print punct space upper word xdigit
A character class matches any character belonging to that class. The word charac‐
ter class matches letters, digits, and the character _.
Within [ and ], an equivalence class can be specified using the syntax [=c=], which
matches all characters with the same collation weight (as defined by the current
locale) as the character c.
Within [ and ], the syntax [.symbol.] matches the collating symbol symbol.
If the extglob shell option is enabled using the shopt builtin, several extended pattern matching
operators are recognized. In the following description, a pattern-list is a list of one or more
patterns separated by a |. Composite patterns may be formed using one or more of the following
sub-patterns:
?(pattern-list)
Matches zero or one occurrence of the given patterns
*(pattern-list)
Matches zero or more occurrences of the given patterns
+(pattern-list)
Matches one or more occurrences of the given patterns
@(pattern-list)
Matches one of the given patterns
!(pattern-list)
Matches anything except one of the given patterns
Complicated extended pattern matching against long strings is slow, especially when the patterns
contain alternations and the strings contain multiple matches. Using separate matches against
shorter strings, or using arrays of strings instead of a single long string, may be faster.
Quote Removal
After the preceding expansions, all unquoted occurrences of the characters \, ', and " that did
not result from one of the above expansions are removed.
REDIRECTION
Before a command is executed, its input and output may be redirected using a special notation in‐
terpreted by the shell. Redirection allows commands' file handles to be duplicated, opened,
closed, made to refer to different files, and can change the files the command reads from and
writes to. Redirection may also be used to modify file handles in the current shell execution
environment. The following redirection operators may precede or appear anywhere within a simple
command or may follow a command. Redirections are processed in the order they appear, from left
to right.
Each redirection that may be preceded by a file descriptor number may instead be preceded by a
word of the form {varname}. In this case, for each redirection operator except >&- and <&-, the
shell will allocate a file descriptor greater than or equal to 10 and assign it to varname. If
>&- or <&- is preceded by {varname}, the value of varname defines the file descriptor to close.
If {varname} is supplied, the redirection persists beyond the scope of the command, allowing the
shell programmer to manage the file descriptor himself.
In the following descriptions, if the file descriptor number is omitted, and the first character
of the redirection operator is <, the redirection refers to the standard input (file descriptor
0). If the first character of the redirection operator is >, the redirection refers to the stan‐
dard output (file descriptor 1).
The word following the redirection operator in the following descriptions, unless otherwise
noted, is subjected to brace expansion, tilde expansion, parameter and variable expansion, com‐
mand substitution, arithmetic expansion, quote removal, pathname expansion, and word splitting.
If it expands to more than one word, bash reports an error.
Note that the order of redirections is significant. For example, the command
ls > dirlist 2>&1
directs both standard output and standard error to the file dirlist, while the command
ls 2>&1 > dirlist
directs only the standard output to file dirlist, because the standard error was duplicated from
the standard output before the standard output was redirected to dirlist.
Bash handles several filenames specially when they are used in redirections, as described in the
following table. If the operating system on which bash is running provides these special files,
bash will use them; otherwise it will emulate them internally with the behavior described below.
/dev/fd/fd
If fd is a valid integer, file descriptor fd is duplicated.
/dev/stdin
File descriptor 0 is duplicated.
/dev/stdout
File descriptor 1 is duplicated.
/dev/stderr
File descriptor 2 is duplicated.
/dev/tcp/host/port
If host is a valid hostname or Internet address, and port is an integer port number
or service name, bash attempts to open the corresponding TCP socket.
/dev/udp/host/port
If host is a valid hostname or Internet address, and port is an integer port number
or service name, bash attempts to open the corresponding UDP socket.
A failure to open or create a file causes the redirection to fail.
Redirections using file descriptors greater than 9 should be used with care, as they may conflict
with file descriptors the shell uses internally.
Note that the exec builtin command can make redirections take effect in the current shell.
Redirecting Input
Redirection of input causes the file whose name results from the expansion of word to be opened
for reading on file descriptor n, or the standard input (file descriptor 0) if n is not speci‐
fied.
The general format for redirecting input is:
[n]<word
Redirecting Output
Redirection of output causes the file whose name results from the expansion of word to be opened
for writing on file descriptor n, or the standard output (file descriptor 1) if n is not speci‐
fied. If the file does not exist it is created; if it does exist it is truncated to zero size.
The general format for redirecting output is:
[n]>word
If the redirection operator is >, and the noclobber option to the set builtin has been enabled,
the redirection will fail if the file whose name results from the expansion of word exists and is
a regular file. If the redirection operator is >|, or the redirection operator is > and the no‐
clobber option to the set builtin command is not enabled, the redirection is attempted even if
the file named by word exists.
Appending Redirected Output
Redirection of output in this fashion causes the file whose name results from the expansion of
word to be opened for appending on file descriptor n, or the standard output (file descriptor 1)
if n is not specified. If the file does not exist it is created.
The general format for appending output is:
[n]>>word
Redirecting Standard Output and Standard Error
This construct allows both the standard output (file descriptor 1) and the standard error output
(file descriptor 2) to be redirected to the file whose name is the expansion of word.
There are two formats for redirecting standard output and standard error:
&>word
and
>&word
Of the two forms, the first is preferred. This is semantically equivalent to
>word 2>&1
When using the second form, word may not expand to a number or -. If it does, other redirection
operators apply (see Duplicating File Descriptors below) for compatibility reasons.
Appending Standard Output and Standard Error
This construct allows both the standard output (file descriptor 1) and the standard error output
(file descriptor 2) to be appended to the file whose name is the expansion of word.
The format for appending standard output and standard error is:
&>>word
This is semantically equivalent to
>>word 2>&1
(see Duplicating File Descriptors below).
Here Documents
This type of redirection instructs the shell to read input from the current source until a line
containing only delimiter (with no trailing blanks) is seen. All of the lines read up to that
point are then used as the standard input (or file descriptor n if n is specified) for a command.
The format of here-documents is:
[n]<<[-]word
here-document
delimiter
No parameter and variable expansion, command substitution, arithmetic expansion, or pathname ex‐
pansion is performed on word. If any part of word is quoted, the delimiter is the result of
quote removal on word, and the lines in the here-document are not expanded. If word is unquoted,
all lines of the here-document are subjected to parameter expansion, command substitution, and
arithmetic expansion, the character sequence \<newline> is ignored, and \ must be used to quote
the characters \, $, and `.
If the redirection operator is <<-, then all leading tab characters are stripped from input lines
and the line containing delimiter. This allows here-documents within shell scripts to be in‐
dented in a natural fashion.
Here Strings
A variant of here documents, the format is:
[n]<<<word
The word undergoes tilde expansion, parameter and variable expansion, command substitution,
arithmetic expansion, and quote removal. Pathname expansion and word splitting are not per‐
formed. The result is supplied as a single string, with a newline appended, to the command on
its standard input (or file descriptor n if n is specified).
Duplicating File Descriptors
The redirection operator
[n]<&word
is used to duplicate input file descriptors. If word expands to one or more digits, the file de‐
scriptor denoted by n is made to be a copy of that file descriptor. If the digits in word do not
specify a file descriptor open for input, a redirection error occurs. If word evaluates to -,
file descriptor n is closed. If n is not specified, the standard input (file descriptor 0) is
used.
The operator
[n]>&word
is used similarly to duplicate output file descriptors. If n is not specified, the standard out‐
put (file descriptor 1) is used. If the digits in word do not specify a file descriptor open for
output, a redirection error occurs. If word evaluates to -, file descriptor n is closed. As a
special case, if n is omitted, and word does not expand to one or more digits or -, the standard
output and standard error are redirected as described previously.
Moving File Descriptors
The redirection operator
[n]<&digit-
moves the file descriptor digit to file descriptor n, or the standard input (file descriptor 0)
if n is not specified. digit is closed after being duplicated to n.
Similarly, the redirection operator
[n]>&digit-
moves the file descriptor digit to file descriptor n, or the standard output (file descriptor 1)
if n is not specified.
Opening File Descriptors for Reading and Writing
The redirection operator
[n]<>word
causes the file whose name is the expansion of word to be opened for both reading and writing on
file descriptor n, or on file descriptor 0 if n is not specified. If the file does not exist, it
is created.
ALIASES
Aliases allow a string to be substituted for a word when it is used as the first word of a simple
command. The shell maintains a list of aliases that may be set and unset with the alias and una‐
lias builtin commands (see SHELL BUILTIN COMMANDS below). The first word of each simple command,
if unquoted, is checked to see if it has an alias. If so, that word is replaced by the text of
the alias. The characters /, $, `, and = and any of the shell metacharacters or quoting charac‐
ters listed above may not appear in an alias name. The replacement text may contain any valid
shell input, including shell metacharacters. The first word of the replacement text is tested
for aliases, but a word that is identical to an alias being expanded is not expanded a second
time. This means that one may alias ls to ls -F, for instance, and bash does not try to recur‐
sively expand the replacement text. If the last character of the alias value is a blank, then
the next command word following the alias is also checked for alias expansion.
Aliases are created and listed with the alias command, and removed with the unalias command.
There is no mechanism for using arguments in the replacement text. If arguments are needed, a
shell function should be used (see FUNCTIONS below).
Aliases are not expanded when the shell is not interactive, unless the expand_aliases shell op‐
tion is set using shopt (see the description of shopt under SHELL BUILTIN COMMANDS below).
The rules concerning the definition and use of aliases are somewhat confusing. Bash always reads
at least one complete line of input, and all lines that make up a compound command, before exe‐
cuting any of the commands on that line or the compound command. Aliases are expanded when a
command is read, not when it is executed. Therefore, an alias definition appearing on the same
line as another command does not take effect until the next line of input is read. The commands
following the alias definition on that line are not affected by the new alias. This behavior is
also an issue when functions are executed. Aliases are expanded when a function definition is
read, not when the function is executed, because a function definition is itself a command. As a
consequence, aliases defined in a function are not available until after that function is exe‐
cuted. To be safe, always put alias definitions on a separate line, and do not use alias in com‐
pound commands.
For almost every purpose, aliases are superseded by shell functions.
FUNCTIONS
A shell function, defined as described above under SHELL GRAMMAR, stores a series of commands for
later execution. When the name of a shell function is used as a simple command name, the list of
commands associated with that function name is executed. Functions are executed in the context
of the current shell; no new process is created to interpret them (contrast this with the execu‐
tion of a shell script). When a function is executed, the arguments to the function become the
positional parameters during its execution. The special parameter # is updated to reflect the
change. Special parameter 0 is unchanged. The first element of the FUNCNAME variable is set to
the name of the function while the function is executing.
All other aspects of the shell execution environment are identical between a function and its
caller with these exceptions: the DEBUG and RETURN traps (see the description of the trap builtin
under SHELL BUILTIN COMMANDS below) are not inherited unless the function has been given the
trace attribute (see the description of the declare builtin below) or the -o functrace shell op‐
tion has been enabled with the set builtin (in which case all functions inherit the DEBUG and RE‐
TURN traps), and the ERR trap is not inherited unless the -o errtrace shell option has been en‐
abled.
Variables local to the function may be declared with the local builtin command. Ordinarily,
variables and their values are shared between the function and its caller. If a variable is de‐
clared local, the variable's visible scope is restricted to that function and its children (in‐
cluding the functions it calls). Local variables "shadow" variables with the same name declared
at previous scopes. For instance, a local variable declared in a function hides a global vari‐
able of the same name: references and assignments refer to the local variable, leaving the global
variable unmodified. When the function returns, the global variable is once again visible.
The shell uses dynamic scoping to control a variable's visibility within functions. With dynamic
scoping, visible variables and their values are a result of the sequence of function calls that
caused execution to reach the current function. The value of a variable that a function sees de‐
pends on its value within its caller, if any, whether that caller is the "global" scope or an‐
other shell function. This is also the value that a local variable declaration "shadows", and
the value that is restored when the function returns.
For example, if a variable var is declared as local in function func1, and func1 calls another
function func2, references to var made from within func2 will resolve to the local variable var
from func1, shadowing any global variable named var.
The unset builtin also acts using the same dynamic scope: if a variable is local to the current
scope, unset will unset it; otherwise the unset will refer to the variable found in any calling
scope as described above. If a variable at the current local scope is unset, it will remain so
until it is reset in that scope or until the function returns. Once the function returns, any
instance of the variable at a previous scope will become visible. If the unset acts on a vari‐
able at a previous scope, any instance of a variable with that name that had been shadowed will
become visible.
The FUNCNEST variable, if set to a numeric value greater than 0, defines a maximum function nest‐
ing level. Function invocations that exceed the limit cause the entire command to abort.
If the builtin command return is executed in a function, the function completes and execution re‐
sumes with the next command after the function call. Any command associated with the RETURN trap
is executed before execution resumes. When a function completes, the values of the positional
parameters and the special parameter # are restored to the values they had prior to the func‐
tion's execution.
Function names and definitions may be listed with the -f option to the declare or typeset builtin
commands. The -F option to declare or typeset will list the function names only (and optionally
the source file and line number, if the extdebug shell option is enabled). Functions may be ex‐
ported so that subshells automatically have them defined with the -f option to the export
builtin. A function definition may be deleted using the -f option to the unset builtin.
Functions may be recursive. The FUNCNEST variable may be used to limit the depth of the function
call stack and restrict the number of function invocations. By default, no limit is imposed on
the number of recursive calls.
ARITHMETIC EVALUATION
The shell allows arithmetic expressions to be evaluated, under certain circumstances (see the let
and declare builtin commands, the (( compound command, and Arithmetic Expansion). Evaluation is
done in fixed-width integers with no check for overflow, though division by 0 is trapped and
flagged as an error. The operators and their precedence, associativity, and values are the same
as in the C language. The following list of operators is grouped into levels of equal-precedence
operators. The levels are listed in order of decreasing precedence.
id++ id--
variable post-increment and post-decrement
- + unary minus and plus
++id --id
variable pre-increment and pre-decrement
! ~ logical and bitwise negation
** exponentiation
* / % multiplication, division, remainder
+ - addition, subtraction
<< >> left and right bitwise shifts
<= >= < >
comparison
== != equality and inequality
& bitwise AND
^ bitwise exclusive OR
| bitwise OR
&& logical AND
|| logical OR
expr?expr:expr
conditional operator
= *= /= %= += -= <<= >>= &= ^= |=
assignment
expr1 , expr2
comma
Shell variables are allowed as operands; parameter expansion is performed before the expression
is evaluated. Within an expression, shell variables may also be referenced by name without using
the parameter expansion syntax. A shell variable that is null or unset evaluates to 0 when ref‐
erenced by name without using the parameter expansion syntax. The value of a variable is evalu‐
ated as an arithmetic expression when it is referenced, or when a variable which has been given
the integer attribute using declare -i is assigned a value. A null value evaluates to 0. A
shell variable need not have its integer attribute turned on to be used in an expression.
Integer constants follow the C language definition, without suffixes or character constants.
Constants with a leading 0 are interpreted as octal numbers. A leading 0x or 0X denotes hexadec‐
imal. Otherwise, numbers take the form [base#]n, where the optional base is a decimal number be‐
tween 2 and 64 representing the arithmetic base, and n is a number in that base. If base# is
omitted, then base 10 is used. When specifying n, if a non-digit is required, the digits greater
than 9 are represented by the lowercase letters, the uppercase letters, @, and _, in that order.
If base is less than or equal to 36, lowercase and uppercase letters may be used interchangeably
to represent numbers between 10 and 35.
Operators are evaluated in order of precedence. Sub-expressions in parentheses are evaluated
first and may override the precedence rules above.
CONDITIONAL EXPRESSIONS
Conditional expressions are used by the [[ compound command and the test and [ builtin commands
to test file attributes and perform string and arithmetic comparisons. The test and [ commands
determine their behavior based on the number of arguments; see the descriptions of those commands
for any other command-specific actions.
Expressions are formed from the following unary or binary primaries. Bash handles several file‐
names specially when they are used in expressions. If the operating system on which bash is run‐
ning provides these special files, bash will use them; otherwise it will emulate them internally
with this behavior: If any file argument to one of the primaries is of the form /dev/fd/n, then
file descriptor n is checked. If the file argument to one of the primaries is one of /dev/stdin,
/dev/stdout, or /dev/stderr, file descriptor 0, 1, or 2, respectively, is checked.
Unless otherwise specified, primaries that operate on files follow symbolic links and operate on
the target of the link, rather than the link itself.
When used with [[, the < and > operators sort lexicographically using the current locale. The
test command sorts using ASCII ordering.
-a file
True if file exists.
-b file
True if file exists and is a block special file.
-c file
True if file exists and is a character special file.
-d file
True if file exists and is a directory.
-e file
True if file exists.
-f file
True if file exists and is a regular file.
-g file
True if file exists and is set-group-id.
-h file
True if file exists and is a symbolic link.
-k file
True if file exists and its ``sticky bit is set.
-p file
True if file exists and is a named pipe (FIFO).
-r file
True if file exists and is readable.
-s file
True if file exists and has a size greater than zero.
-t fd True if file descriptor fd is open and refers to a terminal.
-u file
True if file exists and its set-user-id bit is set.
-w file
True if file exists and is writable.
-x file
True if file exists and is executable.
-G file
True if file exists and is owned by the effective group id.
-L file
True if file exists and is a symbolic link.
-N file
True if file exists and has been modified since it was last read.
-O file
True if file exists and is owned by the effective user id.
-S file
True if file exists and is a socket.
file1 -ef file2
True if file1 and file2 refer to the same device and inode numbers.
file1 -nt file2
True if file1 is newer (according to modification date) than file2, or if file1 exists and
file2 does not.
file1 -ot file2
True if file1 is older than file2, or if file2 exists and file1 does not.
-o optname
True if the shell option optname is enabled. See the list of options under the descrip‐
tion of the -o option to the set builtin below.
-v varname
True if the shell variable varname is set (has been assigned a value).
-R varname
True if the shell variable varname is set and is a name reference.
-z string
True if the length of string is zero.
string
-n string
True if the length of string is non-zero.
string1 == string2
string1 = string2
True if the strings are equal. = should be used with the test command for POSIX confor‐
mance. When used with the [[ command, this performs pattern matching as described above
(Compound Commands).
string1 != string2
True if the strings are not equal.
string1 < string2
True if string1 sorts before string2 lexicographically.
string1 > string2
True if string1 sorts after string2 lexicographically.
arg1 OP arg2
OP is one of -eq, -ne, -lt, -le, -gt, or -ge. These arithmetic binary operators return
true if arg1 is equal to, not equal to, less than, less than or equal to, greater than, or
greater than or equal to arg2, respectively. Arg1 and arg2 may be positive or negative
integers. When used with the [[ command, Arg1 and Arg2 are evaluated as arithmetic ex‐
pressions (see ARITHMETIC EVALUATION above).
SIMPLE COMMAND EXPANSION
When a simple command is executed, the shell performs the following expansions, assignments, and
redirections, from left to right, in the following order.
1. The words that the parser has marked as variable assignments (those preceding the command
name) and redirections are saved for later processing.
2. The words that are not variable assignments or redirections are expanded. If any words
remain after expansion, the first word is taken to be the name of the command and the re‐
maining words are the arguments.
3. Redirections are performed as described above under REDIRECTION.
4. The text after the = in each variable assignment undergoes tilde expansion, parameter ex‐
pansion, command substitution, arithmetic expansion, and quote removal before being as‐
signed to the variable.
If no command name results, the variable assignments affect the current shell environment. Oth‐
erwise, the variables are added to the environment of the executed command and do not affect the
current shell environment. If any of the assignments attempts to assign a value to a readonly
variable, an error occurs, and the command exits with a non-zero status.
If no command name results, redirections are performed, but do not affect the current shell envi‐
ronment. A redirection error causes the command to exit with a non-zero status.
If there is a command name left after expansion, execution proceeds as described below. Other‐
wise, the command exits. If one of the expansions contained a command substitution, the exit
status of the command is the exit status of the last command substitution performed. If there
were no command substitutions, the command exits with a status of zero.
COMMAND EXECUTION
After a command has been split into words, if it results in a simple command and an optional list
of arguments, the following actions are taken.
If the command name contains no slashes, the shell attempts to locate it. If there exists a
shell function by that name, that function is invoked as described above in FUNCTIONS. If the
name does not match a function, the shell searches for it in the list of shell builtins. If a
match is found, that builtin is invoked.
If the name is neither a shell function nor a builtin, and contains no slashes, bash searches
each element of the PATH for a directory containing an executable file by that name. Bash uses a
hash table to remember the full pathnames of executable files (see hash under SHELL BUILTIN COM‐
MANDS below). A full search of the directories in PATH is performed only if the command is not
found in the hash table. If the search is unsuccessful, the shell searches for a defined shell
function named command_not_found_handle. If that function exists, it is invoked in a separate
execution environment with the original command and the original command's arguments as its argu‐
ments, and the function's exit status becomes the exit status of that subshell. If that function
is not defined, the shell prints an error message and returns an exit status of 127.
If the search is successful, or if the command name contains one or more slashes, the shell exe‐
cutes the named program in a separate execution environment. Argument 0 is set to the name
given, and the remaining arguments to the command are set to the arguments given, if any.
If this execution fails because the file is not in executable format, and the file is not a di‐
rectory, it is assumed to be a shell script, a file containing shell commands. A subshell is
spawned to execute it. This subshell reinitializes itself, so that the effect is as if a new
shell had been invoked to handle the script, with the exception that the locations of commands
remembered by the parent (see hash below under SHELL BUILTIN COMMANDS) are retained by the child.
If the program is a file beginning with #!, the remainder of the first line specifies an inter‐
preter for the program. The shell executes the specified interpreter on operating systems that
do not handle this executable format themselves. The arguments to the interpreter consist of a
single optional argument following the interpreter name on the first line of the program, fol‐
lowed by the name of the program, followed by the command arguments, if any.
COMMAND EXECUTION ENVIRONMENT
The shell has an execution environment, which consists of the following:
• open files inherited by the shell at invocation, as modified by redirections supplied to
the exec builtin
• the current working directory as set by cd, pushd, or popd, or inherited by the shell at
invocation
• the file creation mode mask as set by umask or inherited from the shell's parent
• current traps set by trap
• shell parameters that are set by variable assignment or with set or inherited from the
shell's parent in the environment
• shell functions defined during execution or inherited from the shell's parent in the envi‐
ronment
• options enabled at invocation (either by default or with command-line arguments) or by set
• options enabled by shopt
• shell aliases defined with alias
• various process IDs, including those of background jobs, the value of $$, and the value of
PPID
When a simple command other than a builtin or shell function is to be executed, it is invoked in
a separate execution environment that consists of the following. Unless otherwise noted, the
values are inherited from the shell.
• the shell's open files, plus any modifications and additions specified by redirections to
the command
• the current working directory
• the file creation mode mask
• shell variables and functions marked for export, along with variables exported for the
command, passed in the environment
• traps caught by the shell are reset to the values inherited from the shell's parent, and
traps ignored by the shell are ignored
A command invoked in this separate environment cannot affect the shell's execution environment.
Command substitution, commands grouped with parentheses, and asynchronous commands are invoked in
a subshell environment that is a duplicate of the shell environment, except that traps caught by
the shell are reset to the values that the shell inherited from its parent at invocation.
Builtin commands that are invoked as part of a pipeline are also executed in a subshell environ‐
ment. Changes made to the subshell environment cannot affect the shell's execution environment.
Subshells spawned to execute command substitutions inherit the value of the -e option from the
parent shell. When not in posix mode, bash clears the -e option in such subshells.
If a command is followed by a & and job control is not active, the default standard input for the
command is the empty file /dev/null. Otherwise, the invoked command inherits the file descrip‐
tors of the calling shell as modified by redirections.
ENVIRONMENT
When a program is invoked it is given an array of strings called the environment. This is a list
of name-value pairs, of the form name=value.
The shell provides several ways to manipulate the environment. On invocation, the shell scans
its own environment and creates a parameter for each name found, automatically marking it for ex‐
port to child processes. Executed commands inherit the environment. The export and declare -x
commands allow parameters and functions to be added to and deleted from the environment. If the
value of a parameter in the environment is modified, the new value becomes part of the environ‐
ment, replacing the old. The environment inherited by any executed command consists of the
shell's initial environment, whose values may be modified in the shell, less any pairs removed by
the unset command, plus any additions via the export and declare -x commands.
The environment for any simple command or function may be augmented temporarily by prefixing it
with parameter assignments, as described above in PARAMETERS. These assignment statements affect
only the environment seen by that command.
If the -k option is set (see the set builtin command below), then all parameter assignments are
placed in the environment for a command, not just those that precede the command name.
When bash invokes an external command, the variable _ is set to the full filename of the command
and passed to that command in its environment.
EXIT STATUS
The exit status of an executed command is the value returned by the waitpid system call or equiv‐
alent function. Exit statuses fall between 0 and 255, though, as explained below, the shell may
use values above 125 specially. Exit statuses from shell builtins and compound commands are also
limited to this range. Under certain circumstances, the shell will use special values to indi‐
cate specific failure modes.
For the shell's purposes, a command which exits with a zero exit status has succeeded. An exit
status of zero indicates success. A non-zero exit status indicates failure. When a command ter‐
minates on a fatal signal N, bash uses the value of 128+N as the exit status.
If a command is not found, the child process created to execute it returns a status of 127. If a
command is found but is not executable, the return status is 126.
If a command fails because of an error during expansion or redirection, the exit status is
greater than zero.
Shell builtin commands return a status of 0 (true) if successful, and non-zero (false) if an er‐
ror occurs while they execute. All builtins return an exit status of 2 to indicate incorrect us‐
age, generally invalid options or missing arguments.
Bash itself returns the exit status of the last command executed, unless a syntax error occurs,
in which case it exits with a non-zero value. See also the exit builtin command below.
SIGNALS
When bash is interactive, in the absence of any traps, it ignores SIGTERM (so that kill 0 does
not kill an interactive shell), and SIGINT is caught and handled (so that the wait builtin is in‐
terruptible). In all cases, bash ignores SIGQUIT. If job control is in effect, bash ignores
SIGTTIN, SIGTTOU, and SIGTSTP.
Non-builtin commands run by bash have signal handlers set to the values inherited by the shell
from its parent. When job control is not in effect, asynchronous commands ignore SIGINT and
SIGQUIT in addition to these inherited handlers. Commands run as a result of command substitu‐
tion ignore the keyboard-generated job control signals SIGTTIN, SIGTTOU, and SIGTSTP.
The shell exits by default upon receipt of a SIGHUP. Before exiting, an interactive shell re‐
sends the SIGHUP to all jobs, running or stopped. Stopped jobs are sent SIGCONT to ensure that
they receive the SIGHUP. To prevent the shell from sending the signal to a particular job, it
should be removed from the jobs table with the disown builtin (see SHELL BUILTIN COMMANDS below)
or marked to not receive SIGHUP using disown -h.
If the huponexit shell option has been set with shopt, bash sends a SIGHUP to all jobs when an
interactive login shell exits.
If bash is waiting for a command to complete and receives a signal for which a trap has been set,
the trap will not be executed until the command completes. When bash is waiting for an asynchro‐
nous command via the wait builtin, the reception of a signal for which a trap has been set will
cause the wait builtin to return immediately with an exit status greater than 128, immediately
after which the trap is executed.
JOB CONTROL
Job control refers to the ability to selectively stop (suspend) the execution of processes and
continue (resume) their execution at a later point. A user typically employs this facility via
an interactive interface supplied jointly by the operating system kernel's terminal driver and
bash.
The shell associates a job with each pipeline. It keeps a table of currently executing jobs,
which may be listed with the jobs command. When bash starts a job asynchronously (in the back‐
ground), it prints a line that looks like:
[1] 25647
indicating that this job is job number 1 and that the process ID of the last process in the pipe‐
line associated with this job is 25647. All of the processes in a single pipeline are members of
the same job. Bash uses the job abstraction as the basis for job control.
To facilitate the implementation of the user interface to job control, the operating system main‐
tains the notion of a current terminal process group ID. Members of this process group (pro‐
cesses whose process group ID is equal to the current terminal process group ID) receive key‐
board-generated signals such as SIGINT. These processes are said to be in the foreground. Back‐
ground processes are those whose process group ID differs from the terminal's; such processes are
immune to keyboard-generated signals. Only foreground processes are allowed to read from or, if
the user so specifies with stty tostop, write to the terminal. Background processes which at‐
tempt to read from (write to when stty tostop is in effect) the terminal are sent a SIGTTIN
(SIGTTOU) signal by the kernel's terminal driver, which, unless caught, suspends the process.
If the operating system on which bash is running supports job control, bash contains facilities
to use it. Typing the suspend character (typically ^Z, Control-Z) while a process is running
causes that process to be stopped and returns control to bash. Typing the delayed suspend char‐
acter (typically ^Y, Control-Y) causes the process to be stopped when it attempts to read input
from the terminal, and control to be returned to bash. The user may then manipulate the state of
this job, using the bg command to continue it in the background, the fg command to continue it in
the foreground, or the kill command to kill it. A ^Z takes effect immediately, and has the addi‐
tional side effect of causing pending output and typeahead to be discarded.
There are a number of ways to refer to a job in the shell. The character % introduces a job
specification (jobspec). Job number n may be referred to as %n. A job may also be referred to
using a prefix of the name used to start it, or using a substring that appears in its command
line. For example, %ce refers to a stopped job whose command name begins with ce. If a prefix
matches more than one job, bash reports an error. Using %?ce, on the other hand, refers to any
job containing the string ce in its command line. If the substring matches more than one job,
bash reports an error. The symbols %% and %+ refer to the shell's notion of the current job,
which is the last job stopped while it was in the foreground or started in the background. The
previous job may be referenced using %-. If there is only a single job, %+ and %- can both be
used to refer to that job. In output pertaining to jobs (e.g., the output of the jobs command),
the current job is always flagged with a +, and the previous job with a -. A single % (with no
accompanying job specification) also refers to the current job.
Simply naming a job can be used to bring it into the foreground: %1 is a synonym for ``fg %1,
bringing job 1 from the background into the foreground. Similarly, ``%1 & resumes job 1 in the
background, equivalent to ``bg %1.
The shell learns immediately whenever a job changes state. Normally, bash waits until it is
about to print a prompt before reporting changes in a job's status so as to not interrupt any
other output. If the -b option to the set builtin command is enabled, bash reports such changes
immediately. Any trap on SIGCHLD is executed for each child that exits.
If an attempt to exit bash is made while jobs are stopped (or, if the checkjobs shell option has
been enabled using the shopt builtin, running), the shell prints a warning message, and, if the
checkjobs option is enabled, lists the jobs and their statuses. The jobs command may then be
used to inspect their status. If a second attempt to exit is made without an intervening com‐
mand, the shell does not print another warning, and any stopped jobs are terminated.
When the shell is waiting for a job or process using the wait builtin, and job control is en‐
abled, wait will return when the job changes state. The -f option causes wait to wait until the
job or process terminates before returning.
PROMPTING
When executing interactively, bash displays the primary prompt PS1 when it is ready to read a
command, and the secondary prompt PS2 when it needs more input to complete a command. Bash dis‐
plays PS0 after it reads a command but before executing it. Bash displays PS4 as described above
before tracing each command when the -x option is enabled. Bash allows these prompt strings to
be customized by inserting a number of backslash-escaped special characters that are decoded as
follows:
\a an ASCII bell character (07)
\d the date in "Weekday Month Date" format (e.g., "Tue May 26")
\D{format}
the format is passed to strftime(3) and the result is inserted into the prompt
string; an empty format results in a locale-specific time representation. The
braces are required
\e an ASCII escape character (033)
\h the hostname up to the first `.'
\H the hostname
\j the number of jobs currently managed by the shell
\l the basename of the shell's terminal device name
\n newline
\r carriage return
\s the name of the shell, the basename of $0 (the portion following the final slash)
\t the current time in 24-hour HH:MM:SS format
\T the current time in 12-hour HH:MM:SS format
\@ the current time in 12-hour am/pm format
\A the current time in 24-hour HH:MM format
\u the username of the current user
\v the version of bash (e.g., 2.00)
\V the release of bash, version + patch level (e.g., 2.00.0)
\w the current working directory, with $HOME abbreviated with a tilde (uses the value
of the PROMPT_DIRTRIM variable)
\W the basename of the current working directory, with $HOME abbreviated with a tilde
\! the history number of this command
\# the command number of this command
\$ if the effective UID is 0, a #, otherwise a $
\nnn the character corresponding to the octal number nnn
\\ a backslash
\[ begin a sequence of non-printing characters, which could be used to embed a termi‐
nal control sequence into the prompt
\] end a sequence of non-printing characters
The command number and the history number are usually different: the history number of a command
is its position in the history list, which may include commands restored from the history file
(see HISTORY below), while the command number is the position in the sequence of commands exe‐
cuted during the current shell session. After the string is decoded, it is expanded via parame‐
ter expansion, command substitution, arithmetic expansion, and quote removal, subject to the
value of the promptvars shell option (see the description of the shopt command under SHELL
BUILTIN COMMANDS below). This can have unwanted side effects if escaped portions of the string
appear within command substitution or contain characters special to word expansion.
READLINE
This is the library that handles reading input when using an interactive shell, unless the
--noediting option is given at shell invocation. Line editing is also used when using the -e op‐
tion to the read builtin. By default, the line editing commands are similar to those of Emacs.
A vi-style line editing interface is also available. Line editing can be enabled at any time us‐
ing the -o emacs or -o vi options to the set builtin (see SHELL BUILTIN COMMANDS below). To turn
off line editing after the shell is running, use the +o emacs or +o vi options to the set
builtin.
Readline Notation
In this section, the Emacs-style notation is used to denote keystrokes. Control keys are denoted
by C-key, e.g., C-n means Control-N. Similarly, meta keys are denoted by M-key, so M-x means
Meta-X. (On keyboards without a meta key, M-x means ESC x, i.e., press the Escape key then the x
key. This makes ESC the meta prefix. The combination M-C-x means ESC-Control-x, or press the
Escape key then hold the Control key while pressing the x key.)
Readline commands may be given numeric arguments, which normally act as a repeat count. Some‐
times, however, it is the sign of the argument that is significant. Passing a negative argument
to a command that acts in the forward direction (e.g., kill-line) causes that command to act in a
backward direction. Commands whose behavior with arguments deviates from this are noted below.
When a command is described as killing text, the text deleted is saved for possible future re‐
trieval (yanking). The killed text is saved in a kill ring. Consecutive kills cause the text to
be accumulated into one unit, which can be yanked all at once. Commands which do not kill text
separate the chunks of text on the kill ring.
Readline Initialization
Readline is customized by putting commands in an initialization file (the inputrc file). The
name of this file is taken from the value of the INPUTRC variable. If that variable is unset,
the default is ~/.inputrc. If that file does not exist or cannot be read, the ultimate default
is /etc/inputrc. When a program which uses the readline library starts up, the initialization
file is read, and the key bindings and variables are set. There are only a few basic constructs
allowed in the readline initialization file. Blank lines are ignored. Lines beginning with a #
are comments. Lines beginning with a $ indicate conditional constructs. Other lines denote key
bindings and variable settings.
The default key-bindings may be changed with an inputrc file. Other programs that use this li‐
brary may add their own commands and bindings.
For example, placing
M-Control-u: universal-argument
or
C-Meta-u: universal-argument
into the inputrc would make M-C-u execute the readline command universal-argument.
The following symbolic character names are recognized: RUBOUT, DEL, ESC, LFD, NEWLINE, RET, RE‐
TURN, SPC, SPACE, and TAB.
In addition to command names, readline allows keys to be bound to a string that is inserted when
the key is pressed (a macro).
Readline Key Bindings
The syntax for controlling key bindings in the inputrc file is simple. All that is required is
the name of the command or the text of a macro and a key sequence to which it should be bound.
The name may be specified in one of two ways: as a symbolic key name, possibly with Meta- or Con‐
trol- prefixes, or as a key sequence.
When using the form keyname:function-name or macro, keyname is the name of a key spelled out in
English. For example:
Control-u: universal-argument
Meta-Rubout: backward-kill-word
Control-o: "> output"
In the above example, C-u is bound to the function universal-argument, M-DEL is bound to the
function backward-kill-word, and C-o is bound to run the macro expressed on the right hand side
(that is, to insert the text ``> output into the line).
In the second form, "keyseq":function-name or macro, keyseq differs from keyname above in that
strings denoting an entire key sequence may be specified by placing the sequence within double
quotes. Some GNU Emacs style key escapes can be used, as in the following example, but the sym‐
bolic character names are not recognized.
"\C-u": universal-argument
"\C-x\C-r": re-read-init-file
"\e[11~": "Function Key 1"
In this example, C-u is again bound to the function universal-argument. C-x C-r is bound to the
function re-read-init-file, and ESC [ 1 1 ~ is bound to insert the text ``Function Key 1.
The full set of GNU Emacs style escape sequences is
\C- control prefix
\M- meta prefix
\e an escape character
\\ backslash
\" literal "
\' literal '
In addition to the GNU Emacs style escape sequences, a second set of backslash escapes is avail‐
able:
\a alert (bell)
\b backspace
\d delete
\f form feed
\n newline
\r carriage return
\t horizontal tab
\v vertical tab
\nnn the eight-bit character whose value is the octal value nnn (one to three digits)
\xHH the eight-bit character whose value is the hexadecimal value HH (one or two hex
digits)
When entering the text of a macro, single or double quotes must be used to indicate a macro defi‐
nition. Unquoted text is assumed to be a function name. In the macro body, the backslash es‐
capes described above are expanded. Backslash will quote any other character in the macro text,
including " and '.
Bash allows the current readline key bindings to be displayed or modified with the bind builtin
command. The editing mode may be switched during interactive use by using the -o option to the
set builtin command (see SHELL BUILTIN COMMANDS below).
Readline Variables
Readline has variables that can be used to further customize its behavior. A variable may be set
in the inputrc file with a statement of the form
set variable-name value
or using the bind builtin command (see SHELL BUILTIN COMMANDS below).
Except where noted, readline variables can take the values On or Off (without regard to case).
Unrecognized variable names are ignored. When a variable value is read, empty or null values,
"on" (case-insensitive), and "1" are equivalent to On. All other values are equivalent to Off.
The variables and their default values are:
bell-style (audible)
Controls what happens when readline wants to ring the terminal bell. If set to none,
readline never rings the bell. If set to visible, readline uses a visible bell if one is
available. If set to audible, readline attempts to ring the terminal's bell.
bind-tty-special-chars (On)
If set to On, readline attempts to bind the control characters treated specially by the
kernel's terminal driver to their readline equivalents.
blink-matching-paren (Off)
If set to On, readline attempts to briefly move the cursor to an opening parenthesis when
a closing parenthesis is inserted.
colored-completion-prefix (Off)
If set to On, when listing completions, readline displays the common prefix of the set of
possible completions using a different color. The color definitions are taken from the
value of the LS_COLORS environment variable.
colored-stats (Off)
If set to On, readline displays possible completions using different colors to indicate
their file type. The color definitions are taken from the value of the LS_COLORS environ‐
ment variable.
comment-begin (``#)
The string that is inserted when the readline insert-comment command is executed. This
command is bound to M-# in emacs mode and to # in vi command mode.
completion-display-width (-1)
The number of screen columns used to display possible matches when performing completion.
The value is ignored if it is less than 0 or greater than the terminal screen width. A
value of 0 will cause matches to be displayed one per line. The default value is -1.
completion-ignore-case (Off)
If set to On, readline performs filename matching and completion in a case-insensitive
fashion.
completion-map-case (Off)
If set to On, and completion-ignore-case is enabled, readline treats hyphens (-) and un‐
derscores (_) as equivalent when performing case-insensitive filename matching and comple‐
tion.
completion-prefix-display-length (0)
The length in characters of the common prefix of a list of possible completions that is
displayed without modification. When set to a value greater than zero, common prefixes
longer than this value are replaced with an ellipsis when displaying possible completions.
completion-query-items (100)
This determines when the user is queried about viewing the number of possible completions
generated by the possible-completions command. It may be set to any integer value greater
than or equal to zero. If the number of possible completions is greater than or equal to
the value of this variable, readline will ask whether or not the user wishes to view them;
otherwise they are simply listed on the terminal.
convert-meta (On)
If set to On, readline will convert characters with the eighth bit set to an ASCII key se‐
quence by stripping the eighth bit and prefixing an escape character (in effect, using es‐
cape as the meta prefix). The default is On, but readline will set it to Off if the lo‐
cale contains eight-bit characters.
disable-completion (Off)
If set to On, readline will inhibit word completion. Completion characters will be in‐
serted into the line as if they had been mapped to self-insert.
echo-control-characters (On)
When set to On, on operating systems that indicate they support it, readline echoes a
character corresponding to a signal generated from the keyboard.
editing-mode (emacs)
Controls whether readline begins with a set of key bindings similar to Emacs or vi. edit‐
ing-mode can be set to either emacs or vi.
emacs-mode-string (@)
If the show-mode-in-prompt variable is enabled, this string is displayed immediately be‐
fore the last line of the primary prompt when emacs editing mode is active. The value is
expanded like a key binding, so the standard set of meta- and control prefixes and back‐
slash escape sequences is available. Use the \1 and \2 escapes to begin and end sequences
of non-printing characters, which can be used to embed a terminal control sequence into
the mode string.
enable-bracketed-paste (On)
When set to On, readline will configure the terminal in a way that will enable it to in‐
sert each paste into the editing buffer as a single string of characters, instead of
treating each character as if it had been read from the keyboard. This can prevent pasted
characters from being interpreted as editing commands.
enable-keypad (Off)
When set to On, readline will try to enable the application keypad when it is called.
Some systems need this to enable the arrow keys.
enable-meta-key (On)
When set to On, readline will try to enable any meta modifier key the terminal claims to
support when it is called. On many terminals, the meta key is used to send eight-bit
characters.
expand-tilde (Off)
If set to On, tilde expansion is performed when readline attempts word completion.
history-preserve-point (Off)
If set to On, the history code attempts to place point at the same location on each his‐
tory line retrieved with previous-history or next-history.
history-size (unset)
Set the maximum number of history entries saved in the history list. If set to zero, any
existing history entries are deleted and no new entries are saved. If set to a value less
than zero, the number of history entries is not limited. By default, the number of his‐
tory entries is set to the value of the HISTSIZE shell variable. If an attempt is made to
set history-size to a non-numeric value, the maximum number of history entries will be set
to 500.
horizontal-scroll-mode (Off)
When set to On, makes readline use a single line for display, scrolling the input horizon‐
tally on a single screen line when it becomes longer than the screen width rather than
wrapping to a new line. This setting is automatically enabled for terminals of height 1.
input-meta (Off)
If set to On, readline will enable eight-bit input (that is, it will not strip the eighth
bit from the characters it reads), regardless of what the terminal claims it can support.
The name meta-flag is a synonym for this variable. The default is Off, but readline will
set it to On if the locale contains eight-bit characters.
isearch-terminators (``C-[C-J)
The string of characters that should terminate an incremental search without subsequently
executing the character as a command. If this variable has not been given a value, the
characters ESC and C-J will terminate an incremental search.
keymap (emacs)
Set the current readline keymap. The set of valid keymap names is emacs, emacs-standard,
emacs-meta, emacs-ctlx, vi, vi-command, and vi-insert. vi is equivalent to vi-command;
emacs is equivalent to emacs-standard. The default value is emacs; the value of edit‐
ing-mode also affects the default keymap.
keyseq-timeout (500)
Specifies the duration readline will wait for a character when reading an ambiguous key
sequence (one that can form a complete key sequence using the input read so far, or can
take additional input to complete a longer key sequence). If no input is received within
the timeout, readline will use the shorter but complete key sequence. The value is speci‐
fied in milliseconds, so a value of 1000 means that readline will wait one second for ad‐
ditional input. If this variable is set to a value less than or equal to zero, or to a
non-numeric value, readline will wait until another key is pressed to decide which key se‐
quence to complete.
mark-directories (On)
If set to On, completed directory names have a slash appended.
mark-modified-lines (Off)
If set to On, history lines that have been modified are displayed with a preceding aster‐
isk (*).
mark-symlinked-directories (Off)
If set to On, completed names which are symbolic links to directories have a slash ap‐
pended (subject to the value of mark-directories).
match-hidden-files (On)
This variable, when set to On, causes readline to match files whose names begin with a `.'
(hidden files) when performing filename completion. If set to Off, the leading `.' must
be supplied by the user in the filename to be completed.
menu-complete-display-prefix (Off)
If set to On, menu completion displays the common prefix of the list of possible comple‐
tions (which may be empty) before cycling through the list.
output-meta (Off)
If set to On, readline will display characters with the eighth bit set directly rather
than as a meta-prefixed escape sequence. The default is Off, but readline will set it to
On if the locale contains eight-bit characters.
page-completions (On)
If set to On, readline uses an internal more-like pager to display a screenful of possible
completions at a time.
print-completions-horizontally (Off)
If set to On, readline will display completions with matches sorted horizontally in alpha‐
betical order, rather than down the screen.
revert-all-at-newline (Off)
If set to On, readline will undo all changes to history lines before returning when ac‐
cept-line is executed. By default, history lines may be modified and retain individual
undo lists across calls to readline.
show-all-if-ambiguous (Off)
This alters the default behavior of the completion functions. If set to On, words which
have more than one possible completion cause the matches to be listed immediately instead
of ringing the bell.
show-all-if-unmodified (Off)
This alters the default behavior of the completion functions in a fashion similar to
show-all-if-ambiguous. If set to On, words which have more than one possible completion
without any possible partial completion (the possible completions don't share a common
prefix) cause the matches to be listed immediately instead of ringing the bell.
show-mode-in-prompt (Off)
If set to On, add a string to the beginning of the prompt indicating the editing mode:
emacs, vi command, or vi insertion. The mode strings are user-settable (e.g.,
emacs-mode-string).
skip-completed-text (Off)
If set to On, this alters the default completion behavior when inserting a single match
into the line. It's only active when performing completion in the middle of a word. If
enabled, readline does not insert characters from the completion that match characters af‐
ter point in the word being completed, so portions of the word following the cursor are
not duplicated.
vi-cmd-mode-string ((cmd))
If the show-mode-in-prompt variable is enabled, this string is displayed immediately be‐
fore the last line of the primary prompt when vi editing mode is active and in command
mode. The value is expanded like a key binding, so the standard set of meta- and control
prefixes and backslash escape sequences is available. Use the \1 and \2 escapes to begin
and end sequences of non-printing characters, which can be used to embed a terminal con‐
trol sequence into the mode string.
vi-ins-mode-string ((ins))
If the show-mode-in-prompt variable is enabled, this string is displayed immediately be‐
fore the last line of the primary prompt when vi editing mode is active and in insertion
mode. The value is expanded like a key binding, so the standard set of meta- and control
prefixes and backslash escape sequences is available. Use the \1 and \2 escapes to begin
and end sequences of non-printing characters, which can be used to embed a terminal con‐
trol sequence into the mode string.
visible-stats (Off)
If set to On, a character denoting a file's type as reported by stat(2) is appended to the
filename when listing possible completions.
Readline Conditional Constructs
Readline implements a facility similar in spirit to the conditional compilation features of the C
preprocessor which allows key bindings and variable settings to be performed as the result of
tests. There are four parser directives used.
$if The $if construct allows bindings to be made based on the editing mode, the terminal being
used, or the application using readline. The text of the test, after any comparison oper‐
ator,
extends to the end of the line; unless otherwise noted, no characters are required to
isolate it.
mode The mode= form of the $if directive is used to test whether readline is in emacs or
vi mode. This may be used in conjunction with the set keymap command, for in‐
stance, to set bindings in the emacs-standard and emacs-ctlx keymaps only if read‐
line is starting out in emacs mode.
term The term= form may be used to include terminal-specific key bindings, perhaps to
bind the key sequences output by the terminal's function keys. The word on the
right side of the = is tested against both the full name of the terminal and the
portion of the terminal name before the first -. This allows sun to match both sun
and sun-cmd, for instance.
version
The version test may be used to perform comparisons against specific readline ver‐
sions. The version expands to the current readline version. The set of comparison
operators includes =, (and ==), !=, <=, >=, <, and >. The version number supplied
on the right side of the operator consists of a major version number, an optional
decimal point, and an optional minor version (e.g., 7.1). If the minor version is
omitted, it is assumed to be 0. The operator may be separated from the string ver‐
sion and from the version number argument by whitespace.
application
The application construct is used to include application-specific settings. Each
program using the readline library sets the application name, and an initialization
file can test for a particular value. This could be used to bind key sequences to
functions useful for a specific program. For instance, the following command adds
a key sequence that quotes the current or previous word in bash:
$if Bash
# Quote the current or previous word
"\C-xq": "\eb\"\ef\""
$endif
variable
The variable construct provides simple equality tests for readline variables and
values. The permitted comparison operators are =, ==, and !=. The variable name
must be separated from the comparison operator by whitespace; the operator may be
separated from the value on the right hand side by whitespace. Both string and
boolean variables may be tested. Boolean variables must be tested against the val‐
ues on and off.
$endif This command, as seen in the previous example, terminates an $if command.
$else Commands in this branch of the $if directive are executed if the test fails.
$include
This directive takes a single filename as an argument and reads commands and bindings from
that file. For example, the following directive would read /etc/inputrc:
$include /etc/inputrc
Searching
Readline provides commands for searching through the command history (see HISTORY below) for
lines containing a specified string. There are two search modes: incremental and non-incremen‐
tal.
Incremental searches begin before the user has finished typing the search string. As each char‐
acter of the search string is typed, readline displays the next entry from the history matching
the string typed so far. An incremental search requires only as many characters as needed to
find the desired history entry. The characters present in the value of the isearch-terminators
variable are used to terminate an incremental search. If that variable has not been assigned a
value the Escape and Control-J characters will terminate an incremental search. Control-G will
abort an incremental search and restore the original line. When the search is terminated, the
history entry containing the search string becomes the current line.
To find other matching entries in the history list, type Control-S or Control-R as appropriate.
This will search backward or forward in the history for the next entry matching the search string
typed so far. Any other key sequence bound to a readline command will terminate the search and
execute that command. For instance, a newline will terminate the search and accept the line,
thereby executing the command from the history list.
Readline remembers the last incremental search string. If two Control-Rs are typed without any
intervening characters defining a new search string, any remembered search string is used.
Non-incremental searches read the entire search string before starting to search for matching
history lines. The search string may be typed by the user or be part of the contents of the cur‐
rent line.
Readline Command Names
The following is a list of the names of the commands and the default key sequences to which they
are bound. Command names without an accompanying key sequence are unbound by default. In the
following descriptions, point refers to the current cursor position, and mark refers to a cursor
position saved by the set-mark command. The text between the point and mark is referred to as
the region.
Commands for Moving
beginning-of-line (C-a)
Move to the start of the current line.
end-of-line (C-e)
Move to the end of the line.
forward-char (C-f)
Move forward a character.
backward-char (C-b)
Move back a character.
forward-word (M-f)
Move forward to the end of the next word. Words are composed of alphanumeric characters
(letters and digits).
backward-word (M-b)
Move back to the start of the current or previous word. Words are composed of alphanu‐
meric characters (letters and digits).
shell-forward-word
Move forward to the end of the next word. Words are delimited by non-quoted shell
metacharacters.
shell-backward-word
Move back to the start of the current or previous word. Words are delimited by non-quoted
shell metacharacters.
previous-screen-line
Attempt to move point to the same physical screen column on the previous physical screen
line. This will not have the desired effect if the current Readline line does not take up
more than one physical line or if point is not greater than the length of the prompt plus
the screen width.
next-screen-line
Attempt to move point to the same physical screen column on the next physical screen line.
This will not have the desired effect if the current Readline line does not take up more
than one physical line or if the length of the current Readline line is not greater than
the length of the prompt plus the screen width.
clear-display (M-C-l)
Clear the screen and, if possible, the terminal's scrollback buffer, then redraw the cur‐
rent line, leaving the current line at the top of the screen.
clear-screen (C-l)
Clear the screen, then redraw the current line, leaving the current line at the top of the
screen. With an argument, refresh the current line without clearing the screen.
redraw-current-line
Refresh the current line.
Commands for Manipulating the History
accept-line (Newline, Return)
Accept the line regardless of where the cursor is. If this line is non-empty, add it to
the history list according to the state of the HISTCONTROL variable. If the line is a
modified history line, then restore the history line to its original state.
previous-history (C-p)
Fetch the previous command from the history list, moving back in the list.
next-history (C-n)
Fetch the next command from the history list, moving forward in the list.
beginning-of-history (M-<)
Move to the first line in the history.
end-of-history (M->)
Move to the end of the input history, i.e., the line currently being entered.
reverse-search-history (C-r)
Search backward starting at the current line and moving `up' through the history as neces‐
sary. This is an incremental search.
forward-search-history (C-s)
Search forward starting at the current line and moving `down' through the history as nec‐
essary. This is an incremental search.
non-incremental-reverse-search-history (M-p)
Search backward through the history starting at the current line using a non-incremental
search for a string supplied by the user.
non-incremental-forward-search-history (M-n)
Search forward through the history using a non-incremental search for a string supplied by
the user.
history-search-forward
Search forward through the history for the string of characters between the start of the
current line and the point. This is a non-incremental search.
history-search-backward
Search backward through the history for the string of characters between the start of the
current line and the point. This is a non-incremental search.
history-substring-search-backward
Search backward through the history for the string of characters between the start of the
current line and the current cursor position (the point). The search string may match
anywhere in a history line. This is a non-incremental search.
history-substring-search-forward
Search forward through the history for the string of characters between the start of the
current line and the point. The search string may match anywhere in a history line. This
is a non-incremental search.
yank-nth-arg (M-C-y)
Insert the first argument to the previous command (usually the second word on the previous
line) at point. With an argument n, insert the nth word from the previous command (the
words in the previous command begin with word 0). A negative argument inserts the nth
word from the end of the previous command. Once the argument n is computed, the argument
is extracted as if the "!n" history expansion had been specified.
yank-last-arg (M-., M-_)
Insert the last argument to the previous command (the last word of the previous history
entry). With a numeric argument, behave exactly like yank-nth-arg. Successive calls to
yank-last-arg move back through the history list, inserting the last word (or the word
specified by the argument to the first call) of each line in turn. Any numeric argument
supplied to these successive calls determines the direction to move through the history.
A negative argument switches the direction through the history (back or forward). The
history expansion facilities are used to extract the last word, as if the "!$" history ex‐
pansion had been specified.
shell-expand-line (M-C-e)
Expand the line as the shell does. This performs alias and history expansion as well as
all of the shell word expansions. See HISTORY EXPANSION below for a description of his‐
tory expansion.
history-expand-line (M-^)
Perform history expansion on the current line. See HISTORY EXPANSION below for a descrip‐
tion of history expansion.
magic-space
Perform history expansion on the current line and insert a space. See HISTORY EXPANSION
below for a description of history expansion.
alias-expand-line
Perform alias expansion on the current line. See ALIASES above for a description of alias
expansion.
history-and-alias-expand-line
Perform history and alias expansion on the current line.
insert-last-argument (M-., M-_)
A synonym for yank-last-arg.
operate-and-get-next (C-o)
Accept the current line for execution and fetch the next line relative to the current line
from the history for editing. A numeric argument, if supplied, specifies the history en‐
try to use instead of the current line.
edit-and-execute-command (C-x C-e)
Invoke an editor on the current command line, and execute the result as shell commands.
Bash attempts to invoke $VISUAL, $EDITOR, and emacs as the editor, in that order.
Commands for Changing Text
end-of-file (usually C-d)
The character indicating end-of-file as set, for example, by ``stty. If this character
is read when there are no characters on the line, and point is at the beginning of the
line, Readline interprets it as the end of input and returns EOF.
delete-char (C-d)
Delete the character at point. If this function is bound to the same character as the tty
EOF character, as C-d commonly is, see above for the effects.
backward-delete-char (Rubout)
Delete the character behind the cursor. When given a numeric argument, save the deleted
text on the kill ring.
forward-backward-delete-char
Delete the character under the cursor, unless the cursor is at the end of the line, in
which case the character behind the cursor is deleted.
quoted-insert (C-q, C-v)
Add the next character typed to the line verbatim. This is how to insert characters like
C-q, for example.
tab-insert (C-v TAB)
Insert a tab character.
self-insert (a, b, A, 1, !, ...)
Insert the character typed.
transpose-chars (C-t)
Drag the character before point forward over the character at point, moving point forward
as well. If point is at the end of the line, then this transposes the two characters be‐
fore point. Negative arguments have no effect.
transpose-words (M-t)
Drag the word before point past the word after point, moving point over that word as well.
If point is at the end of the line, this transposes the last two words on the line.
upcase-word (M-u)
Uppercase the current (or following) word. With a negative argument, uppercase the previ‐
ous word, but do not move point.
downcase-word (M-l)
Lowercase the current (or following) word. With a negative argument, lowercase the previ‐
ous word, but do not move point.
capitalize-word (M-c)
Capitalize the current (or following) word. With a negative argument, capitalize the pre‐
vious word, but do not move point.
overwrite-mode
Toggle overwrite mode. With an explicit positive numeric argument, switches to overwrite
mode. With an explicit non-positive numeric argument, switches to insert mode. This com‐
mand affects only emacs mode; vi mode does overwrite differently. Each call to readline()
starts in insert mode. In overwrite mode, characters bound to self-insert replace the
text at point rather than pushing the text to the right. Characters bound to back‐
ward-delete-char replace the character before point with a space. By default, this com‐
mand is unbound.
Killing and Yanking
kill-line (C-k)
Kill the text from point to the end of the line.
backward-kill-line (C-x Rubout)
Kill backward to the beginning of the line.
unix-line-discard (C-u)
Kill backward from point to the beginning of the line. The killed text is saved on the
kill-ring.
kill-whole-line
Kill all characters on the current line, no matter where point is.
kill-word (M-d)
Kill from point to the end of the current word, or if between words, to the end of the
next word. Word boundaries are the same as those used by forward-word.
backward-kill-word (M-Rubout)
Kill the word behind point. Word boundaries are the same as those used by backward-word.
shell-kill-word
Kill from point to the end of the current word, or if between words, to the end of the
next word. Word boundaries are the same as those used by shell-forward-word.
shell-backward-kill-word
Kill the word behind point. Word boundaries are the same as those used by shell-back‐
ward-word.
unix-word-rubout (C-w)
Kill the word behind point, using white space as a word boundary. The killed text is
saved on the kill-ring.
unix-filename-rubout
Kill the word behind point, using white space and the slash character as the word bound‐
aries. The killed text is saved on the kill-ring.
delete-horizontal-space (M-\)
Delete all spaces and tabs around point.
kill-region
Kill the text in the current region.
copy-region-as-kill
Copy the text in the region to the kill buffer.
copy-backward-word
Copy the word before point to the kill buffer. The word boundaries are the same as back‐
ward-word.
copy-forward-word
Copy the word following point to the kill buffer. The word boundaries are the same as
forward-word.
yank (C-y)
Yank the top of the kill ring into the buffer at point.
yank-pop (M-y)
Rotate the kill ring, and yank the new top. Only works following yank or yank-pop.
Numeric Arguments
digit-argument (M-0, M-1, ..., M--)
Add this digit to the argument already accumulating, or start a new argument. M-- starts
a negative argument.
universal-argument
This is another way to specify an argument. If this command is followed by one or more
digits, optionally with a leading minus sign, those digits define the argument. If the
command is followed by digits, executing universal-argument again ends the numeric argu‐
ment, but is otherwise ignored. As a special case, if this command is immediately fol‐
lowed by a character that is neither a digit nor minus sign, the argument count for the
next command is multiplied by four. The argument count is initially one, so executing
this function the first time makes the argument count four, a second time makes the argu‐
ment count sixteen, and so on.
Completing
complete (TAB)
Attempt to perform completion on the text before point. Bash attempts completion treating
the text as a variable (if the text begins with $), username (if the text begins with ~),
hostname (if the text begins with @), or command (including aliases and functions) in
turn. If none of these produces a match, filename completion is attempted.
possible-completions (M-?)
List the possible completions of the text before point.
insert-completions (M-*)
Insert all completions of the text before point that would have been generated by possi‐
ble-completions.
menu-complete
Similar to complete, but replaces the word to be completed with a single match from the
list of possible completions. Repeated execution of menu-complete steps through the list
of possible completions, inserting each match in turn. At the end of the list of comple‐
tions, the bell is rung (subject to the setting of bell-style) and the original text is
restored. An argument of n moves n positions forward in the list of matches; a negative
argument may be used to move backward through the list. This command is intended to be
bound to TAB, but is unbound by default.
menu-complete-backward
Identical to menu-complete, but moves backward through the list of possible completions,
as if menu-complete had been given a negative argument. This command is unbound by de‐
fault.
delete-char-or-list
Deletes the character under the cursor if not at the beginning or end of the line (like
delete-char). If at the end of the line, behaves identically to possible-completions.
This command is unbound by default.
complete-filename (M-/)
Attempt filename completion on the text before point.
possible-filename-completions (C-x /)
List the possible completions of the text before point, treating it as a filename.
complete-username (M-~)
Attempt completion on the text before point, treating it as a username.
possible-username-completions (C-x ~)
List the possible completions of the text before point, treating it as a username.
complete-variable (M-$)
Attempt completion on the text before point, treating it as a shell variable.
possible-variable-completions (C-x $)
List the possible completions of the text before point, treating it as a shell variable.
complete-hostname (M-@)
Attempt completion on the text before point, treating it as a hostname.
possible-hostname-completions (C-x @)
List the possible completions of the text before point, treating it as a hostname.
complete-command (M-!)
Attempt completion on the text before point, treating it as a command name. Command com‐
pletion attempts to match the text against aliases, reserved words, shell functions, shell
builtins, and finally executable filenames, in that order.
possible-command-completions (C-x !)
List the possible completions of the text before point, treating it as a command name.
dynamic-complete-history (M-TAB)
Attempt completion on the text before point, comparing the text against lines from the
history list for possible completion matches.
dabbrev-expand
Attempt menu completion on the text before point, comparing the text against lines from
the history list for possible completion matches.
complete-into-braces (M-{)
Perform filename completion and insert the list of possible completions enclosed within
braces so the list is available to the shell (see Brace Expansion above).
Keyboard Macros
start-kbd-macro (C-x ()
Begin saving the characters typed into the current keyboard macro.
end-kbd-macro (C-x ))
Stop saving the characters typed into the current keyboard macro and store the definition.
call-last-kbd-macro (C-x e)
Re-execute the last keyboard macro defined, by making the characters in the macro appear
as if typed at the keyboard.
print-last-kbd-macro ()
Print the last keyboard macro defined in a format suitable for the inputrc file.
Miscellaneous
re-read-init-file (C-x C-r)
Read in the contents of the inputrc file, and incorporate any bindings or variable assign‐
ments found there.
abort (C-g)
Abort the current editing command and ring the terminal's bell (subject to the setting of
bell-style).
do-lowercase-version (M-A, M-B, M-x, ...)
If the metafied character x is uppercase, run the command that is bound to the correspond‐
ing metafied lowercase character. The behavior is undefined if x is already lowercase.
prefix-meta (ESC)
Metafy the next character typed. ESC f is equivalent to Meta-f.
undo (C-_, C-x C-u)
Incremental undo, separately remembered for each line.
revert-line (M-r)
Undo all changes made to this line. This is like executing the undo command enough times
to return the line to its initial state.
tilde-expand (M-&)
Perform tilde expansion on the current word.
set-mark (C-@, M-<space>)
Set the mark to the point. If a numeric argument is supplied, the mark is set to that po‐
sition.
exchange-point-and-mark (C-x C-x)
Swap the point with the mark. The current cursor position is set to the saved position,
and the old cursor position is saved as the mark.
character-search (C-])
A character is read and point is moved to the next occurrence of that character. A nega‐
tive count searches for previous occurrences.
character-search-backward (M-C-])
A character is read and point is moved to the previous occurrence of that character. A
negative count searches for subsequent occurrences.
skip-csi-sequence
Read enough characters to consume a multi-key sequence such as those defined for keys like
Home and End. Such sequences begin with a Control Sequence Indicator (CSI), usually
ESC-[. If this sequence is bound to "\[", keys producing such sequences will have no ef‐
fect unless explicitly bound to a readline command, instead of inserting stray characters
into the editing buffer. This is unbound by default, but usually bound to ESC-[.
insert-comment (M-#)
Without a numeric argument, the value of the readline comment-begin variable is inserted
at the beginning of the current line. If a numeric argument is supplied, this command
acts as a toggle: if the characters at the beginning of the line do not match the value of
comment-begin, the value is inserted, otherwise the characters in comment-begin are
deleted from the beginning of the line. In either case, the line is accepted as if a new‐
line had been typed. The default value of comment-begin causes this command to make the
current line a shell comment. If a numeric argument causes the comment character to be
removed, the line will be executed by the shell.
glob-complete-word (M-g)
The word before point is treated as a pattern for pathname expansion, with an asterisk im‐
plicitly appended. This pattern is used to generate a list of matching filenames for pos‐
sible completions.
glob-expand-word (C-x *)
The word before point is treated as a pattern for pathname expansion, and the list of
matching filenames is inserted, replacing the word. If a numeric argument is supplied, an
asterisk is appended before pathname expansion.
glob-list-expansions (C-x g)
The list of expansions that would have been generated by glob-expand-word is displayed,
and the line is redrawn. If a numeric argument is supplied, an asterisk is appended be‐
fore pathname expansion.
dump-functions
Print all of the functions and their key bindings to the readline output stream. If a nu‐
meric argument is supplied, the output is formatted in such a way that it can be made part
of an inputrc file.
dump-variables
Print all of the settable readline variables and their values to the readline output
stream. If a numeric argument is supplied, the output is formatted in such a way that it
can be made part of an inputrc file.
dump-macros
Print all of the readline key sequences bound to macros and the strings they output. If a
numeric argument is supplied, the output is formatted in such a way that it can be made
part of an inputrc file.
display-shell-version (C-x C-v)
Display version information about the current instance of bash.
Programmable Completion
When word completion is attempted for an argument to a command for which a completion specifica‐
tion (a compspec) has been defined using the complete builtin (see SHELL BUILTIN COMMANDS below),
the programmable completion facilities are invoked.
First, the command name is identified. If the command word is the empty string (completion at‐
tempted at the beginning of an empty line), any compspec defined with the -E option to complete
is used. If a compspec has been defined for that command, the compspec is used to generate the
list of possible completions for the word. If the command word is a full pathname, a compspec
for the full pathname is searched for first. If no compspec is found for the full pathname, an
attempt is made to find a compspec for the portion following the final slash. If those searches
do not result in a compspec, any compspec defined with the -D option to complete is used as the
default. If there is no default compspec, bash attempts alias expansion on the command word as a
final resort, and attempts to find a compspec for the command word from any successful expansion.
Once a compspec has been found, it is used to generate the list of matching words. If a compspec
is not found, the default bash completion as described above under Completing is performed.
First, the actions specified by the compspec are used. Only matches which are prefixed by the
word being completed are returned. When the -f or -d option is used for filename or directory
name completion, the shell variable FIGNORE is used to filter the matches.
Any completions specified by a pathname expansion pattern to the -G option are generated next.
The words generated by the pattern need not match the word being completed. The GLOBIGNORE shell
variable is not used to filter the matches, but the FIGNORE variable is used.
Next, the string specified as the argument to the -W option is considered. The string is first
split using the characters in the IFS special variable as delimiters. Shell quoting is honored.
Each word is then expanded using brace expansion, tilde expansion, parameter and variable expan‐
sion, command substitution, and arithmetic expansion, as described above under EXPANSION. The
results are split using the rules described above under Word Splitting. The results of the ex‐
pansion are prefix-matched against the word being completed, and the matching words become the
possible completions.
After these matches have been generated, any shell function or command specified with the -F and
-C options is invoked. When the command or function is invoked, the COMP_LINE, COMP_POINT,
COMP_KEY, and COMP_TYPE variables are assigned values as described above under Shell Variables.
If a shell function is being invoked, the COMP_WORDS and COMP_CWORD variables are also set. When
the function or command is invoked, the first argument ($1) is the name of the command whose ar‐
guments are being completed, the second argument ($2) is the word being completed, and the third
argument ($3) is the word preceding the word being completed on the current command line. No
filtering of the generated completions against the word being completed is performed; the func‐
tion or command has complete freedom in generating the matches.
Any function specified with -F is invoked first. The function may use any of the shell facili‐
ties, including the compgen builtin described below, to generate the matches. It must put the
possible completions in the COMPREPLY array variable, one per array element.
Next, any command specified with the -C option is invoked in an environment equivalent to command
substitution. It should print a list of completions, one per line, to the standard output.
Backslash may be used to escape a newline, if necessary.
After all of the possible completions are generated, any filter specified with the -X option is
applied to the list. The filter is a pattern as used for pathname expansion; a & in the pattern
is replaced with the text of the word being completed. A literal & may be escaped with a back‐
slash; the backslash is removed before attempting a match. Any completion that matches the pat‐
tern will be removed from the list. A leading ! negates the pattern; in this case any completion
not matching the pattern will be removed. If the nocasematch shell option is enabled, the match
is performed without regard to the case of alphabetic characters.
Finally, any prefix and suffix specified with the -P and -S options are added to each member of
the completion list, and the result is returned to the readline completion code as the list of
possible completions.
If the previously-applied actions do not generate any matches, and the -o dirnames option was
supplied to complete when the compspec was defined, directory name completion is attempted.
If the -o plusdirs option was supplied to complete when the compspec was defined, directory name
completion is attempted and any matches are added to the results of the other actions.
By default, if a compspec is found, whatever it generates is returned to the completion code as
the full set of possible completions. The default bash completions are not attempted, and the
readline default of filename completion is disabled. If the -o bashdefault option was supplied
to complete when the compspec was defined, the bash default completions are attempted if the
compspec generates no matches. If the -o default option was supplied to complete when the comp‐
spec was defined, readline's default completion will be performed if the compspec (and, if at‐
tempted, the default bash completions) generate no matches.
When a compspec indicates that directory name completion is desired, the programmable completion
functions force readline to append a slash to completed names which are symbolic links to direc‐
tories, subject to the value of the mark-directories readline variable, regardless of the setting
of the mark-symlinked-directories readline variable.
There is some support for dynamically modifying completions. This is most useful when used in
combination with a default completion specified with complete -D. It's possible for shell func‐
tions executed as completion handlers to indicate that completion should be retried by returning
an exit status of 124. If a shell function returns 124, and changes the compspec associated with
the command on which completion is being attempted (supplied as the first argument when the func‐
tion is executed), programmable completion restarts from the beginning, with an attempt to find a
new compspec for that command. This allows a set of completions to be built dynamically as com‐
pletion is attempted, rather than being loaded all at once.
For instance, assuming that there is a library of compspecs, each kept in a file corresponding to
the name of the command, the following default completion function would load completions dynami‐
cally:
_completion_loader()
{
. "/etc/bash_completion.d/$1.sh" >/dev/null 2>&1 && return 124
}
complete -D -F _completion_loader -o bashdefault -o default
HISTORY
When the -o history option to the set builtin is enabled, the shell provides access to the com‐
mand history, the list of commands previously typed. The value of the HISTSIZE variable is used
as the number of commands to save in a history list. The text of the last HISTSIZE commands (de‐
fault 500) is saved. The shell stores each command in the history list prior to parameter and
variable expansion (see EXPANSION above) but after history expansion is performed, subject to the
values of the shell variables HISTIGNORE and HISTCONTROL.
On startup, the history is initialized from the file named by the variable HISTFILE (default
~/.bash_history). The file named by the value of HISTFILE is truncated, if necessary, to contain
no more than the number of lines specified by the value of HISTFILESIZE. If HISTFILESIZE is un‐
set, or set to null, a non-numeric value, or a numeric value less than zero, the history file is
not truncated. When the history file is read, lines beginning with the history comment character
followed immediately by a digit are interpreted as timestamps for the following history line.
These timestamps are optionally displayed depending on the value of the HISTTIMEFORMAT variable.
When a shell with history enabled exits, the last $HISTSIZE lines are copied from the history
list to $HISTFILE. If the histappend shell option is enabled (see the description of shopt under
SHELL BUILTIN COMMANDS below), the lines are appended to the history file, otherwise the history
file is overwritten. If HISTFILE is unset, or if the history file is unwritable, the history is
not saved. If the HISTTIMEFORMAT variable is set, time stamps are written to the history file,
marked with the history comment character, so they may be preserved across shell sessions. This
uses the history comment character to distinguish timestamps from other history lines. After
saving the history, the history file is truncated to contain no more than HISTFILESIZE lines. If
HISTFILESIZE is unset, or set to null, a non-numeric value, or a numeric value less than zero,
the history file is not truncated.
The builtin command fc (see SHELL BUILTIN COMMANDS below) may be used to list or edit and re-exe‐
cute a portion of the history list. The history builtin may be used to display or modify the
history list and manipulate the history file. When using command-line editing, search commands
are available in each editing mode that provide access to the history list.
The shell allows control over which commands are saved on the history list. The HISTCONTROL and
HISTIGNORE variables may be set to cause the shell to save only a subset of the commands entered.
The cmdhist shell option, if enabled, causes the shell to attempt to save each line of a multi-
line command in the same history entry, adding semicolons where necessary to preserve syntactic
correctness. The lithist shell option causes the shell to save the command with embedded new‐
lines instead of semicolons. See the description of the shopt builtin below under SHELL BUILTIN
COMMANDS for information on setting and unsetting shell options.
HISTORY EXPANSION
The shell supports a history expansion feature that is similar to the history expansion in csh.
This section describes what syntax features are available. This feature is enabled by default
for interactive shells, and can be disabled using the +H option to the set builtin command (see
SHELL BUILTIN COMMANDS below). Non-interactive shells do not perform history expansion by de‐
fault.
History expansions introduce words from the history list into the input stream, making it easy to
repeat commands, insert the arguments to a previous command into the current input line, or fix
errors in previous commands quickly.
History expansion is performed immediately after a complete line is read, before the shell breaks
it into words, and is performed on each line individually without taking quoting on previous
lines into account. It takes place in two parts. The first is to determine which line from the
history list to use during substitution. The second is to select portions of that line for in‐
clusion into the current one. The line selected from the history is the event, and the portions
of that line that are acted upon are words. Various modifiers are available to manipulate the
selected words. The line is broken into words in the same fashion as when reading input, so that
several metacharacter-separated words surrounded by quotes are considered one word. History ex‐
pansions are introduced by the appearance of the history expansion character, which is ! by de‐
fault. Only backslash (\) and single quotes can quote the history expansion character, but the
history expansion character is also treated as quoted if it immediately precedes the closing dou‐
ble quote in a double-quoted string.
Several characters inhibit history expansion if found immediately following the history expansion
character, even if it is unquoted: space, tab, newline, carriage return, and =. If the extglob
shell option is enabled, ( will also inhibit expansion.
Several shell options settable with the shopt builtin may be used to tailor the behavior of his‐
tory expansion. If the histverify shell option is enabled (see the description of the shopt
builtin below), and readline is being used, history substitutions are not immediately passed to
the shell parser. Instead, the expanded line is reloaded into the readline editing buffer for
further modification. If readline is being used, and the histreedit shell option is enabled, a
failed history substitution will be reloaded into the readline editing buffer for correction.
The -p option to the history builtin command may be used to see what a history expansion will do
before using it. The -s option to the history builtin may be used to add commands to the end of
the history list without actually executing them, so that they are available for subsequent re‐
call.
The shell allows control of the various characters used by the history expansion mechanism (see
the description of histchars above under Shell Variables). The shell uses the history comment
character to mark history timestamps when writing the history file.
Event Designators
An event designator is a reference to a command line entry in the history list. Unless the ref‐
erence is absolute, events are relative to the current position in the history list.
! Start a history substitution, except when followed by a blank, newline, carriage return, =
or ( (when the extglob shell option is enabled using the shopt builtin).
!n Refer to command line n.
!-n Refer to the current command minus n.
!! Refer to the previous command. This is a synonym for `!-1'.
!string
Refer to the most recent command preceding the current position in the history list start‐
ing with string.
!?string[?]
Refer to the most recent command preceding the current position in the history list con‐
taining string. The trailing ? may be omitted if string is followed immediately by a new‐
line. If string is missing, the string from the most recent search is used; it is an er‐
ror if there is no previous search string.
^string1^string2^
Quick substitution. Repeat the previous command, replacing string1 with string2. Equiva‐
lent to ``!!:s^string1^string2^ (see Modifiers below).
!# The entire command line typed so far.
Word Designators
Word designators are used to select desired words from the event. A : separates the event speci‐
fication from the word designator. It may be omitted if the word designator begins with a ^, $,
*, -, or %. Words are numbered from the beginning of the line, with the first word being denoted
by 0 (zero). Words are inserted into the current line separated by single spaces.
0 (zero)
The zeroth word. For the shell, this is the command word.
n The nth word.
^ The first argument. That is, word 1.
$ The last word. This is usually the last argument, but will expand to the zeroth word if
there is only one word in the line.
% The first word matched by the most recent `?string?' search, if the search string begins
with a character that is part of a word.
x-y A range of words; `-y' abbreviates `0-y'.
* All of the words but the zeroth. This is a synonym for `1-$'. It is not an error to use
* if there is just one word in the event; the empty string is returned in that case.
x* Abbreviates x-$.
x- Abbreviates x-$ like x*, but omits the last word. If x is missing, it defaults to 0.
If a word designator is supplied without an event specification, the previous command is used as
the event.
Modifiers
After the optional word designator, there may appear a sequence of one or more of the following
modifiers, each preceded by a `:'. These modify, or edit, the word or words selected from the
history event.
h Remove a trailing filename component, leaving only the head.
t Remove all leading filename components, leaving the tail.
r Remove a trailing suffix of the form .xxx, leaving the basename.
e Remove all but the trailing suffix.
p Print the new command but do not execute it.
q Quote the substituted words, escaping further substitutions.
x Quote the substituted words as with q, but break into words at blanks and newlines. The q
and x modifiers are mutually exclusive; the last one supplied is used.
s/old/new/
Substitute new for the first occurrence of old in the event line. Any character may be
used as the delimiter in place of /. The final delimiter is optional if it is the last
character of the event line. The delimiter may be quoted in old and new with a single
backslash. If & appears in new, it is replaced by old. A single backslash will quote the
&. If old is null, it is set to the last old substituted, or, if no previous history sub‐
stitutions took place, the last string in a !?string[?] search. If new is null, each
matching old is deleted.
& Repeat the previous substitution.
g Cause changes to be applied over the entire event line. This is used in conjunction with
`:s' (e.g., `:gs/old/new/') or `:&'. If used with `:s', any delimiter can be used in
place of /, and the final delimiter is optional if it is the last character of the event
line. An a may be used as a synonym for g.
G Apply the following `s' or `&' modifier once to each word in the event line.
SHELL BUILTIN COMMANDS
Unless otherwise noted, each builtin command documented in this section as accepting options pre‐
ceded by - accepts -- to signify the end of the options. The :, true, false, and test/[ builtins
do not accept options and do not treat -- specially. The exit, logout, return, break, continue,
let, and shift builtins accept and process arguments beginning with - without requiring --.
Other builtins that accept arguments but are not specified as accepting options interpret argu‐
ments beginning with - as invalid options and require -- to prevent this interpretation.
: [arguments]
No effect; the command does nothing beyond expanding arguments and performing any speci‐
fied redirections. The return status is zero.
. filename [arguments]
source filename [arguments]
Read and execute commands from filename in the current shell environment and return the
exit status of the last command executed from filename. If filename does not contain a
slash, filenames in PATH are used to find the directory containing filename. The file
searched for in PATH need not be executable. When bash is not in posix mode, the current
directory is searched if no file is found in PATH. If the sourcepath option to the shopt
builtin command is turned off, the PATH is not searched. If any arguments are supplied,
they become the positional parameters when filename is executed. Otherwise the positional
parameters are unchanged. If the -T option is enabled, source inherits any trap on DEBUG;
if it is not, any DEBUG trap string is saved and restored around the call to source, and
source unsets the DEBUG trap while it executes. If -T is not set, and the sourced file
changes the DEBUG trap, the new value is retained when source completes. The return sta‐
tus is the status of the last command exited within the script (0 if no commands are exe‐
cuted), and false if filename is not found or cannot be read.
alias [-p] [name[=value] ...]
Alias with no arguments or with the -p option prints the list of aliases in the form alias
name=value on standard output. When arguments are supplied, an alias is defined for each
name whose value is given. A trailing space in value causes the next word to be checked
for alias substitution when the alias is expanded. For each name in the argument list for
which no value is supplied, the name and value of the alias is printed. Alias returns
true unless a name is given for which no alias has been defined.
bg [jobspec ...]
Resume each suspended job jobspec in the background, as if it had been started with &. If
jobspec is not present, the shell's notion of the current job is used. bg jobspec returns
0 unless run when job control is disabled or, when run with job control enabled, any spec‐
ified jobspec was not found or was started without job control.
bind [-m keymap] [-lpsvPSVX]
bind [-m keymap] [-q function] [-u function] [-r keyseq]
bind [-m keymap] -f filename
bind [-m keymap] -x keyseq:shell-command
bind [-m keymap] keyseq:function-name
bind [-m keymap] keyseq:readline-command
Display current readline key and function bindings, bind a key sequence to a readline
function or macro, or set a readline variable. Each non-option argument is a command as
it would appear in .inputrc, but each binding or command must be passed as a separate ar‐
gument; e.g., '"\C-x\C-r": re-read-init-file'. Options, if supplied, have the following
meanings:
-m keymap
Use keymap as the keymap to be affected by the subsequent bindings. Acceptable
keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move,
vi-command, and vi-insert. vi is equivalent to vi-command (vi-move is also a syn‐
onym); emacs is equivalent to emacs-standard.
-l List the names of all readline functions.
-p Display readline function names and bindings in such a way that they can be re-
read.
-P List current readline function names and bindings.
-s Display readline key sequences bound to macros and the strings they output in such
a way that they can be re-read.
-S Display readline key sequences bound to macros and the strings they output.
-v Display readline variable names and values in such a way that they can be re-read.
-V List current readline variable names and values.
-f filename
Read key bindings from filename.
-q function
Query about which keys invoke the named function.
-u function
Unbind all keys bound to the named function.
-r keyseq
Remove any current binding for keyseq.
-x keyseq:shell-command
Cause shell-command to be executed whenever keyseq is entered. When shell-command
is executed, the shell sets the READLINE_LINE variable to the contents of the read‐
line line buffer and the READLINE_POINT and READLINE_MARK variables to the current
location of the insertion point and the saved insertion point (the mark), respec‐
tively. If the executed command changes the value of any of READLINE_LINE, READ‐
LINE_POINT, or READLINE_MARK, those new values will be reflected in the editing
state.
-X List all key sequences bound to shell commands and the associated commands in a
format that can be reused as input.
The return value is 0 unless an unrecognized option is given or an error occurred.
break [n]
Exit from within a for, while, until, or select loop. If n is specified, break n levels.
n must be ≥ 1. If n is greater than the number of enclosing loops, all enclosing loops
are exited. The return value is 0 unless n is not greater than or equal to 1.
builtin shell-builtin [arguments]
Execute the specified shell builtin, passing it arguments, and return its exit status.
This is useful when defining a function whose name is the same as a shell builtin, retain‐
ing the functionality of the builtin within the function. The cd builtin is commonly re‐
defined this way. The return status is false if shell-builtin is not a shell builtin com‐
mand.
caller [expr]
Returns the context of any active subroutine call (a shell function or a script executed
with the . or source builtins). Without expr, caller displays the line number and source
filename of the current subroutine call. If a non-negative integer is supplied as expr,
caller displays the line number, subroutine name, and source file corresponding to that
position in the current execution call stack. This extra information may be used, for ex‐
ample, to print a stack trace. The current frame is frame 0. The return value is 0 un‐
less the shell is not executing a subroutine call or expr does not correspond to a valid
position in the call stack.
cd [-L|[-P [-e]] [-@]] [dir]
Change the current directory to dir. if dir is not supplied, the value of the HOME shell
variable is the default. Any additional arguments following dir are ignored. The vari‐
able CDPATH defines the search path for the directory containing dir: each directory name
in CDPATH is searched for dir. Alternative directory names in CDPATH are separated by a
colon (:). A null directory name in CDPATH is the same as the current directory, i.e.,
``.. If dir begins with a slash (/), then CDPATH is not used. The -P option causes cd
to use the physical directory structure by resolving symbolic links while traversing dir
and before processing instances of .. in dir (see also the -P option to the set builtin
command); the -L option forces symbolic links to be followed by resolving the link after
processing instances of .. in dir. If .. appears in dir, it is processed by removing the
immediately previous pathname component from dir, back to a slash or the beginning of dir.
If the -e option is supplied with -P, and the current working directory cannot be success‐
fully determined after a successful directory change, cd will return an unsuccessful sta‐
tus. On systems that support it, the -@ option presents the extended attributes associ‐
ated with a file as a directory. An argument of - is converted to $OLDPWD before the di‐
rectory change is attempted. If a non-empty directory name from CDPATH is used, or if -
is the first argument, and the directory change is successful, the absolute pathname of
the new working directory is written to the standard output. The return value is true if
the directory was successfully changed; false otherwise.
command [-pVv] command [arg ...]
Run command with args suppressing the normal shell function lookup. Only builtin commands
or commands found in the PATH are executed. If the -p option is given, the search for
command is performed using a default value for PATH that is guaranteed to find all of the
standard utilities. If either the -V or -v option is supplied, a description of command
is printed. The -v option causes a single word indicating the command or filename used to
invoke command to be displayed; the -V option produces a more verbose description. If the
-V or -v option is supplied, the exit status is 0 if command was found, and 1 if not. If
neither option is supplied and an error occurred or command cannot be found, the exit sta‐
tus is 127. Otherwise, the exit status of the command builtin is the exit status of com‐
mand.
compgen [option] [word]
Generate possible completion matches for word according to the options, which may be any
option accepted by the complete builtin with the exception of -p and -r, and write the
matches to the standard output. When using the -F or -C options, the various shell vari‐
ables set by the programmable completion facilities, while available, will not have useful
values.
The matches will be generated in the same way as if the programmable completion code had
generated them directly from a completion specification with the same flags. If word is
specified, only those completions matching word will be displayed.
The return value is true unless an invalid option is supplied, or no matches were gener‐
ated.
complete [-abcdefgjksuv] [-o comp-option] [-DEI] [-A action] [-G globpat] [-W wordlist]
[-F function] [-C command] [-X filterpat] [-P prefix] [-S suffix] name [name ...]
complete -pr [-DEI] [name ...]
Specify how arguments to each name should be completed. If the -p option is supplied, or
if no options are supplied, existing completion specifications are printed in a way that
allows them to be reused as input. The -r option removes a completion specification for
each name, or, if no names are supplied, all completion specifications. The -D option in‐
dicates that other supplied options and actions should apply to the ``default command
completion; that is, completion attempted on a command for which no completion has previ‐
ously been defined. The -E option indicates that other supplied options and actions
should apply to ``empty command completion; that is, completion attempted on a blank
line. The -I option indicates that other supplied options and actions should apply to
completion on the initial non-assignment word on the line, or after a command delimiter
such as ; or |, which is usually command name completion. If multiple options are sup‐
plied, the -D option takes precedence over -E, and both take precedence over -I. If any
of -D, -E, or -I are supplied, any other name arguments are ignored; these completions
only apply to the case specified by the option.
The process of applying these completion specifications when word completion is attempted
is described above under Programmable Completion.
Other options, if specified, have the following meanings. The arguments to the -G, -W,
and -X options (and, if necessary, the -P and -S options) should be quoted to protect them
from expansion before the complete builtin is invoked.
-o comp-option
The comp-option controls several aspects of the compspec's behavior beyond the
simple generation of completions. comp-option may be one of:
bashdefault
Perform the rest of the default bash completions if the compspec generates
no matches.
default Use readline's default filename completion if the compspec generates no
matches.
dirnames
Perform directory name completion if the compspec generates no matches.
filenames
Tell readline that the compspec generates filenames, so it can perform any
filename-specific processing (like adding a slash to directory names,
quoting special characters, or suppressing trailing spaces). Intended to
be used with shell functions.
noquote Tell readline not to quote the completed words if they are filenames
(quoting filenames is the default).
nosort Tell readline not to sort the list of possible completions alphabetically.
nospace Tell readline not to append a space (the default) to words completed at
the end of the line.
plusdirs
After any matches defined by the compspec are generated, directory name
completion is attempted and any matches are added to the results of the
other actions.
-A action
The action may be one of the following to generate a list of possible completions:
alias Alias names. May also be specified as -a.
arrayvar
Array variable names.
binding Readline key binding names.
builtin Names of shell builtin commands. May also be specified as -b.
command Command names. May also be specified as -c.
directory
Directory names. May also be specified as -d.
disabled
Names of disabled shell builtins.
enabled Names of enabled shell builtins.
export Names of exported shell variables. May also be specified as -e.
file File names. May also be specified as -f.
function
Names of shell functions.
group Group names. May also be specified as -g.
helptopic
Help topics as accepted by the help builtin.
hostname
Hostnames, as taken from the file specified by the HOSTFILE shell vari‐
able.
job Job names, if job control is active. May also be specified as -j.
keyword Shell reserved words. May also be specified as -k.
running Names of running jobs, if job control is active.
service Service names. May also be specified as -s.
setopt Valid arguments for the -o option to the set builtin.
shopt Shell option names as accepted by the shopt builtin.
signal Signal names.
stopped Names of stopped jobs, if job control is active.
user User names. May also be specified as -u.
variable
Names of all shell variables. May also be specified as -v.
-C command
command is executed in a subshell environment, and its output is used as the pos‐
sible completions.
-F function
The shell function function is executed in the current shell environment. When
the function is executed, the first argument ($1) is the name of the command whose
arguments are being completed, the second argument ($2) is the word being com‐
pleted, and the third argument ($3) is the word preceding the word being completed
on the current command line. When it finishes, the possible completions are re‐
trieved from the value of the COMPREPLY array variable.
-G globpat
The pathname expansion pattern globpat is expanded to generate the possible com‐
pletions.
-P prefix
prefix is added at the beginning of each possible completion after all other op‐
tions have been applied.
-S suffix
suffix is appended to each possible completion after all other options have been
applied.
-W wordlist
The wordlist is split using the characters in the IFS special variable as delim‐
iters, and each resultant word is expanded. Shell quoting is honored within
wordlist, in order to provide a mechanism for the words to contain shell metachar‐
acters or characters in the value of IFS. The possible completions are the mem‐
bers of the resultant list which match the word being completed.
-X filterpat
filterpat is a pattern as used for pathname expansion. It is applied to the list
of possible completions generated by the preceding options and arguments, and each
completion matching filterpat is removed from the list. A leading ! in filterpat
negates the pattern; in this case, any completion not matching filterpat is re‐
moved.
The return value is true unless an invalid option is supplied, an option other than -p or
-r is supplied without a name argument, an attempt is made to remove a completion specifi‐
cation for a name for which no specification exists, or an error occurs adding a comple‐
tion specification.
compopt [-o option] [-DEI] [+o option] [name]
Modify completion options for each name according to the options, or for the currently-ex‐
ecuting completion if no names are supplied. If no options are given, display the comple‐
tion options for each name or the current completion. The possible values of option are
those valid for the complete builtin described above. The -D option indicates that other
supplied options should apply to the ``default command completion; that is, completion
attempted on a command for which no completion has previously been defined. The -E option
indicates that other supplied options should apply to ``empty command completion; that
is, completion attempted on a blank line. The -I option indicates that other supplied op‐
tions should apply to completion on the initial non-assignment word on the line, or after
a command delimiter such as ; or |, which is usually command name completion.
The return value is true unless an invalid option is supplied, an attempt is made to mod‐
ify the options for a name for which no completion specification exists, or an output er‐
ror occurs.
continue [n]
Resume the next iteration of the enclosing for, while, until, or select loop. If n is
specified, resume at the nth enclosing loop. n must be ≥ 1. If n is greater than the
number of enclosing loops, the last enclosing loop (the ``top-level loop) is resumed.
The return value is 0 unless n is not greater than or equal to 1.
declare [-aAfFgiIlnrtux] [-p] [name[=value] ...]
typeset [-aAfFgiIlnrtux] [-p] [name[=value] ...]
Declare variables and/or give them attributes. If no names are given then display the
values of variables. The -p option will display the attributes and values of each name.
When -p is used with name arguments, additional options, other than -f and -F, are ig‐
nored. When -p is supplied without name arguments, it will display the attributes and
values of all variables having the attributes specified by the additional options. If no
other options are supplied with -p, declare will display the attributes and values of all
shell variables. The -f option will restrict the display to shell functions. The -F op‐
tion inhibits the display of function definitions; only the function name and attributes
are printed. If the extdebug shell option is enabled using shopt, the source file name
and line number where each name is defined are displayed as well. The -F option implies
-f. The -g option forces variables to be created or modified at the global scope, even
when declare is executed in a shell function. It is ignored in all other cases. The -I
option causes local variables to inherit the attributes (except the nameref attribute) and
value of any existing variable with the same name at a surrounding scope. If there is no
existing variable, the local variable is initially unset. The following options can be
used to restrict output to variables with the specified attribute or to give variables at‐
tributes:
-a Each name is an indexed array variable (see Arrays above).
-A Each name is an associative array variable (see Arrays above).
-f Use function names only.
-i The variable is treated as an integer; arithmetic evaluation (see ARITHMETIC EVALU‐
ATION above) is performed when the variable is assigned a value.
-l When the variable is assigned a value, all upper-case characters are converted to
lower-case. The upper-case attribute is disabled.
-n Give each name the nameref attribute, making it a name reference to another vari‐
able. That other variable is defined by the value of name. All references, as‐
signments, and attribute modifications to name, except those using or changing the
-n attribute itself, are performed on the variable referenced by name's value. The
nameref attribute cannot be applied to array variables.
-r Make names readonly. These names cannot then be assigned values by subsequent as‐
signment statements or unset.
-t Give each name the trace attribute. Traced functions inherit the DEBUG and RETURN
traps from the calling shell. The trace attribute has no special meaning for vari‐
ables.
-u When the variable is assigned a value, all lower-case characters are converted to
upper-case. The lower-case attribute is disabled.
-x Mark names for export to subsequent commands via the environment.
Using `+' instead of `-' turns off the attribute instead, with the exceptions that +a and
+A may not be used to destroy array variables and +r will not remove the readonly attri‐
bute. When used in a function, declare and typeset make each name local, as with the lo‐
cal command, unless the -g option is supplied. If a variable name is followed by =value,
the value of the variable is set to value. When using -a or -A and the compound assign‐
ment syntax to create array variables, additional attributes do not take effect until sub‐
sequent assignments. The return value is 0 unless an invalid option is encountered, an
attempt is made to define a function using ``-f foo=bar, an attempt is made to assign a
value to a readonly variable, an attempt is made to assign a value to an array variable
without using the compound assignment syntax (see Arrays above), one of the names is not a
valid shell variable name, an attempt is made to turn off readonly status for a readonly
variable, an attempt is made to turn off array status for an array variable, or an attempt
is made to display a non-existent function with -f.
dirs [-clpv] [+n] [-n]
Without options, displays the list of currently remembered directories. The default dis‐
play is on a single line with directory names separated by spaces. Directories are added
to the list with the pushd command; the popd command removes entries from the list. The
current directory is always the first directory in the stack.
-c Clears the directory stack by deleting all of the entries.
-l Produces a listing using full pathnames; the default listing format uses a tilde to
denote the home directory.
-p Print the directory stack with one entry per line.
-v Print the directory stack with one entry per line, prefixing each entry with its
index in the stack.
+n Displays the nth entry counting from the left of the list shown by dirs when in‐
voked without options, starting with zero.
-n Displays the nth entry counting from the right of the list shown by dirs when in‐
voked without options, starting with zero.
The return value is 0 unless an invalid option is supplied or n indexes beyond the end of
the directory stack.
disown [-ar] [-h] [jobspec ... | pid ... ]
Without options, remove each jobspec from the table of active jobs. If jobspec is not
present, and neither the -a nor the -r option is supplied, the current job is used. If
the -h option is given, each jobspec is not removed from the table, but is marked so that
SIGHUP is not sent to the job if the shell receives a SIGHUP. If no jobspec is supplied,
the -a option means to remove or mark all jobs; the -r option without a jobspec argument
restricts operation to running jobs. The return value is 0 unless a jobspec does not
specify a valid job.
echo [-neE] [arg ...]
Output the args, separated by spaces, followed by a newline. The return status is 0 un‐
less a write error occurs. If -n is specified, the trailing newline is suppressed. If
the -e option is given, interpretation of the following backslash-escaped characters is
enabled. The -E option disables the interpretation of these escape characters, even on
systems where they are interpreted by default. The xpg_echo shell option may be used to
dynamically determine whether or not echo expands these escape characters by default.
echo does not interpret -- to mean the end of options. echo interprets the following es‐
cape sequences:
\a alert (bell)
\b backspace
\c suppress further output
\e
\E an escape character
\f form feed
\n new line
\r carriage return
\t horizontal tab
\v vertical tab
\\ backslash
\0nnn the eight-bit character whose value is the octal value nnn (zero to three octal
digits)
\xHH the eight-bit character whose value is the hexadecimal value HH (one or two hex
digits)
\uHHHH the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHH
(one to four hex digits)
\UHHHHHHHH
the Unicode (ISO/IEC 10646) character whose value is the hexadecimal value HHHHHHHH
(one to eight hex digits)
enable [-a] [-dnps] [-f filename] [name ...]
Enable and disable builtin shell commands. Disabling a builtin allows a disk command
which has the same name as a shell builtin to be executed without specifying a full path‐
name, even though the shell normally searches for builtins before disk commands. If -n is
used, each name is disabled; otherwise, names are enabled. For example, to use the test
binary found via the PATH instead of the shell builtin version, run ``enable -n test.
The -f option means to load the new builtin command name from shared object filename, on
systems that support dynamic loading. The -d option will delete a builtin previously
loaded with -f. If no name arguments are given, or if the -p option is supplied, a list
of shell builtins is printed. With no other option arguments, the list consists of all
enabled shell builtins. If -n is supplied, only disabled builtins are printed. If -a is
supplied, the list printed includes all builtins, with an indication of whether or not
each is enabled. If -s is supplied, the output is restricted to the POSIX special
builtins. The return value is 0 unless a name is not a shell builtin or there is an error
loading a new builtin from a shared object.
eval [arg ...]
The args are read and concatenated together into a single command. This command is then
read and executed by the shell, and its exit status is returned as the value of eval. If
there are no args, or only null arguments, eval returns 0.
exec [-cl] [-a name] [command [arguments]]
If command is specified, it replaces the shell. No new process is created. The arguments
become the arguments to command. If the -l option is supplied, the shell places a dash at
the beginning of the zeroth argument passed to command. This is what login(1) does. The
-c option causes command to be executed with an empty environment. If -a is supplied, the
shell passes name as the zeroth argument to the executed command. If command cannot be
executed for some reason, a non-interactive shell exits, unless the execfail shell option
is enabled. In that case, it returns failure. An interactive shell returns failure if
the file cannot be executed. A subshell exits unconditionally if exec fails. If command
is not specified, any redirections take effect in the current shell, and the return status
is 0. If there is a redirection error, the return status is 1.
exit [n]
Cause the shell to exit with a status of n. If n is omitted, the exit status is that of
the last command executed. A trap on EXIT is executed before the shell terminates.
export [-fn] [name[=word]] ...
export -p
The supplied names are marked for automatic export to the environment of subsequently exe‐
cuted commands. If the -f option is given, the names refer to functions. If no names are
given, or if the -p option is supplied, a list of names of all exported variables is
printed. The -n option causes the export property to be removed from each name. If a
variable name is followed by =word, the value of the variable is set to word. export re‐
turns an exit status of 0 unless an invalid option is encountered, one of the names is not
a valid shell variable name, or -f is supplied with a name that is not a function.
fc [-e ename] [-lnr] [first] [last]
fc -s [pat=rep] [cmd]
The first form selects a range of commands from first to last from the history list and
displays or edits and re-executes them. First and last may be specified as a string (to
locate the last command beginning with that string) or as a number (an index into the his‐
tory list, where a negative number is used as an offset from the current command number).
When listing, a first or last of 0 is equivalent to -1 and -0 is equivalent to the current
command (usually the fc command); otherwise 0 is equivalent to -1 and -0 is invalid. If
last is not specified, it is set to the current command for listing (so that ``fc -l -10
prints the last 10 commands) and to first otherwise. If first is not specified, it is set
to the previous command for editing and -16 for listing.
The -n option suppresses the command numbers when listing. The -r option reverses the or‐
der of the commands. If the -l option is given, the commands are listed on standard out‐
put. Otherwise, the editor given by ename is invoked on a file containing those commands.
If ename is not given, the value of the FCEDIT variable is used, and the value of EDITOR
if FCEDIT is not set. If neither variable is set, vi is used. When editing is complete,
the edited commands are echoed and executed.
In the second form, command is re-executed after each instance of pat is replaced by rep.
Command is interpreted the same as first above. A useful alias to use with this is
``r="fc -s", so that typing ``r cc runs the last command beginning with ``cc and
typing ``r re-executes the last command.
If the first form is used, the return value is 0 unless an invalid option is encountered
or first or last specify history lines out of range. If the -e option is supplied, the
return value is the value of the last command executed or failure if an error occurs with
the temporary file of commands. If the second form is used, the return status is that of
the command re-executed, unless cmd does not specify a valid history line, in which case
fc returns failure.
fg [jobspec]
Resume jobspec in the foreground, and make it the current job. If jobspec is not present,
the shell's notion of the current job is used. The return value is that of the command
placed into the foreground, or failure if run when job control is disabled or, when run
with job control enabled, if jobspec does not specify a valid job or jobspec specifies a
job that was started without job control.
getopts optstring name [arg ...]
getopts is used by shell procedures to parse positional parameters. optstring contains
the option characters to be recognized; if a character is followed by a colon, the option
is expected to have an argument, which should be separated from it by white space. The
colon and question mark characters may not be used as option characters. Each time it is
invoked, getopts places the next option in the shell variable name, initializing name if
it does not exist, and the index of the next argument to be processed into the variable
OPTIND. OPTIND is initialized to 1 each time the shell or a shell script is invoked.
When an option requires an argument, getopts places that argument into the variable OP‐
TARG. The shell does not reset OPTIND automatically; it must be manually reset between
multiple calls to getopts within the same shell invocation if a new set of parameters is
to be used.
When the end of options is encountered, getopts exits with a return value greater than
zero. OPTIND is set to the index of the first non-option argument, and name is set to ?.
getopts normally parses the positional parameters, but if more arguments are supplied as
arg values, getopts parses those instead.
getopts can report errors in two ways. If the first character of optstring is a colon,
silent error reporting is used. In normal operation, diagnostic messages are printed when
invalid options or missing option arguments are encountered. If the variable OPTERR is
set to 0, no error messages will be displayed, even if the first character of optstring is
not a colon.
If an invalid option is seen, getopts places ? into name and, if not silent, prints an er‐
ror message and unsets OPTARG. If getopts is silent, the option character found is placed
in OPTARG and no diagnostic message is printed.
If a required argument is not found, and getopts is not silent, a question mark (?) is
placed in name, OPTARG is unset, and a diagnostic message is printed. If getopts is
silent, then a colon (:) is placed in name and OPTARG is set to the option character
found.
getopts returns true if an option, specified or unspecified, is found. It returns false
if the end of options is encountered or an error occurs.
hash [-lr] [-p filename] [-dt] [name]
Each time hash is invoked, the full pathname of the command name is determined by search‐
ing the directories in $PATH and remembered. Any previously-remembered pathname is dis‐
carded. If the -p option is supplied, no path search is performed, and filename is used
as the full filename of the command. The -r option causes the shell to forget all remem‐
bered locations. The -d option causes the shell to forget the remembered location of each
name. If the -t option is supplied, the full pathname to which each name corresponds is
printed. If multiple name arguments are supplied with -t, the name is printed before the
hashed full pathname. The -l option causes output to be displayed in a format that may be
reused as input. If no arguments are given, or if only -l is supplied, information about
remembered commands is printed. The return status is true unless a name is not found or
an invalid option is supplied.
help [-dms] [pattern]
Display helpful information about builtin commands. If pattern is specified, help gives
detailed help on all commands matching pattern; otherwise help for all the builtins and
shell control structures is printed.
-d Display a short description of each pattern
-m Display the description of each pattern in a manpage-like format
-s Display only a short usage synopsis for each pattern
The return status is 0 unless no command matches pattern.
history [n]
history -c
history -d offset
history -d start-end
history -anrw [filename]
history -p arg [arg ...]
history -s arg [arg ...]
With no options, display the command history list with line numbers. Lines listed with a
* have been modified. An argument of n lists only the last n lines. If the shell vari‐
able HISTTIMEFORMAT is set and not null, it is used as a format string for strftime(3) to
display the time stamp associated with each displayed history entry. No intervening blank
is printed between the formatted time stamp and the history line. If filename is sup‐
plied, it is used as the name of the history file; if not, the value of HISTFILE is used.
Options, if supplied, have the following meanings:
-c Clear the history list by deleting all the entries.
-d offset
Delete the history entry at position offset. If offset is negative, it is inter‐
preted as relative to one greater than the last history position, so negative in‐
dices count back from the end of the history, and an index of -1 refers to the cur‐
rent history -d command.
-d start-end
Delete the history entries between positions start and end, inclusive. Positive
and negative values for start and end are interpreted as described above.
-a Append the ``new history lines to the history file. These are history lines en‐
tered since the beginning of the current bash session, but not already appended to
the history file.
-n Read the history lines not already read from the history file into the current his‐
tory list. These are lines appended to the history file since the beginning of the
current bash session.
-r Read the contents of the history file and append them to the current history list.
-w Write the current history list to the history file, overwriting the history file's
contents.
-p Perform history substitution on the following args and display the result on the
standard output. Does not store the results in the history list. Each arg must be
quoted to disable normal history expansion.
-s Store the args in the history list as a single entry. The last command in the his‐
tory list is removed before the args are added.
If the HISTTIMEFORMAT variable is set, the time stamp information associated with each
history entry is written to the history file, marked with the history comment character.
When the history file is read, lines beginning with the history comment character followed
immediately by a digit are interpreted as timestamps for the following history entry. The
return value is 0 unless an invalid option is encountered, an error occurs while reading
or writing the history file, an invalid offset is supplied as an argument to -d, or the
history expansion supplied as an argument to -p fails.
jobs [-lnprs] [ jobspec ... ]
jobs -x command [ args ... ]
The first form lists the active jobs. The options have the following meanings:
-l List process IDs in addition to the normal information.
-n Display information only about jobs that have changed status since the user was
last notified of their status.
-p List only the process ID of the job's process group leader.
-r Display only running jobs.
-s Display only stopped jobs.
If jobspec is given, output is restricted to information about that job. The return sta‐
tus is 0 unless an invalid option is encountered or an invalid jobspec is supplied.
If the -x option is supplied, jobs replaces any jobspec found in command or args with the
corresponding process group ID, and executes command passing it args, returning its exit
status.
kill [-s sigspec | -n signum | -sigspec] [pid | jobspec] ...
kill -l|-L [sigspec | exit_status]
Send the signal named by sigspec or signum to the processes named by pid or jobspec.
sigspec is either a case-insensitive signal name such as SIGKILL (with or without the SIG
prefix) or a signal number; signum is a signal number. If sigspec is not present, then
SIGTERM is assumed. An argument of -l lists the signal names. If any arguments are sup‐
plied when -l is given, the names of the signals corresponding to the arguments are
listed, and the return status is 0. The exit_status argument to -l is a number specifying
either a signal number or the exit status of a process terminated by a signal. The -L op‐
tion is equivalent to -l. kill returns true if at least one signal was successfully sent,
or false if an error occurs or an invalid option is encountered.
let arg [arg ...]
Each arg is an arithmetic expression to be evaluated (see ARITHMETIC EVALUATION above).
If the last arg evaluates to 0, let returns 1; 0 is returned otherwise.
local [option] [name[=value] ... | - ]
For each argument, a local variable named name is created, and assigned value. The option
can be any of the options accepted by declare. When local is used within a function, it
causes the variable name to have a visible scope restricted to that function and its chil‐
dren. If name is -, the set of shell options is made local to the function in which local
is invoked: shell options changed using the set builtin inside the function are restored
to their original values when the function returns. The restore is effected as if a se‐
ries of set commands were executed to restore the values that were in place before the
function. With no operands, local writes a list of local variables to the standard out‐
put. It is an error to use local when not within a function. The return status is 0 un‐
less local is used outside a function, an invalid name is supplied, or name is a readonly
variable.
logout Exit a login shell.
mapfile [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum] [ar‐
ray]
readarray [-d delim] [-n count] [-O origin] [-s count] [-t] [-u fd] [-C callback] [-c quantum]
[array]
Read lines from the standard input into the indexed array variable array, or from file de‐
scriptor fd if the -u option is supplied. The variable MAPFILE is the default array. Op‐
tions, if supplied, have the following meanings:
-d The first character of delim is used to terminate each input line, rather than new‐
line. If delim is the empty string, mapfile will terminate a line when it reads a
NUL character.
-n Copy at most count lines. If count is 0, all lines are copied.
-O Begin assigning to array at index origin. The default index is 0.
-s Discard the first count lines read.
-t Remove a trailing delim (default newline) from each line read.
-u Read lines from file descriptor fd instead of the standard input.
-C Evaluate callback each time quantum lines are read. The -c option specifies quan‐
tum.
-c Specify the number of lines read between each call to callback.
If -C is specified without -c, the default quantum is 5000. When callback is evaluated,
it is supplied the index of the next array element to be assigned and the line to be as‐
signed to that element as additional arguments. callback is evaluated after the line is
read but before the array element is assigned.
If not supplied with an explicit origin, mapfile will clear array before assigning to it.
mapfile returns successfully unless an invalid option or option argument is supplied, ar‐
ray is invalid or unassignable, or if array is not an indexed array.
popd [-n] [+n] [-n]
Removes entries from the directory stack. With no arguments, removes the top directory
from the stack, and performs a cd to the new top directory. Arguments, if supplied, have
the following meanings:
-n Suppresses the normal change of directory when removing directories from the stack,
so that only the stack is manipulated.
+n Removes the nth entry counting from the left of the list shown by dirs, starting
with zero. For example: ``popd +0 removes the first directory, ``popd +1 the
second.
-n Removes the nth entry counting from the right of the list shown by dirs, starting
with zero. For example: ``popd -0 removes the last directory, ``popd -1 the
next to last.
If the popd command is successful, a dirs is performed as well, and the return status is
0. popd returns false if an invalid option is encountered, the directory stack is empty,
a non-existent directory stack entry is specified, or the directory change fails.
printf [-v var] format [arguments]
Write the formatted arguments to the standard output under the control of the format. The
-v option causes the output to be assigned to the variable var rather than being printed
to the standard output.
The format is a character string which contains three types of objects: plain characters,
which are simply copied to standard output, character escape sequences, which are con‐
verted and copied to the standard output, and format specifications, each of which causes
printing of the next successive argument. In addition to the standard printf(1) format
specifications, printf interprets the following extensions:
%b causes printf to expand backslash escape sequences in the corresponding argument in
the same way as echo -e.
%q causes printf to output the corresponding argument in a format that can be reused
as shell input.
%(datefmt)T
causes printf to output the date-time string resulting from using datefmt as a for‐
mat string for strftime(3). The corresponding argument is an integer representing
the number of seconds since the epoch. Two special argument values may be used: -1
represents the current time, and -2 represents the time the shell was invoked. If
no argument is specified, conversion behaves as if -1 had been given. This is an
exception to the usual printf behavior.
The %b, %q, and %T directives all use the field width and precision arguments from the
format specification and write that many bytes from (or use that wide a field for) the ex‐
panded argument, which usually contains more characters than the original.
Arguments to non-string format specifiers are treated as C constants, except that a lead‐
ing plus or minus sign is allowed, and if the leading character is a single or double
quote, the value is the ASCII value of the following character.
The format is reused as necessary to consume all of the arguments. If the format requires
more arguments than are supplied, the extra format specifications behave as if a zero
value or null string, as appropriate, had been supplied. The return value is zero on suc‐
cess, non-zero on failure.
pushd [-n] [+n] [-n]
pushd [-n] [dir]
Adds a directory to the top of the directory stack, or rotates the stack, making the new
top of the stack the current working directory. With no arguments, pushd exchanges the
top two directories and returns 0, unless the directory stack is empty. Arguments, if
supplied, have the following meanings:
-n Suppresses the normal change of directory when rotating or adding directories to
the stack, so that only the stack is manipulated.
+n Rotates the stack so that the nth directory (counting from the left of the list
shown by dirs, starting with zero) is at the top.
-n Rotates the stack so that the nth directory (counting from the right of the list
shown by dirs, starting with zero) is at the top.
dir Adds dir to the directory stack at the top, making it the new current working di‐
rectory as if it had been supplied as the argument to the cd builtin.
If the pushd command is successful, a dirs is performed as well. If the first form is
used, pushd returns 0 unless the cd to dir fails. With the second form, pushd returns 0
unless the directory stack is empty, a non-existent directory stack element is specified,
or the directory change to the specified new current directory fails.
pwd [-LP]
Print the absolute pathname of the current working directory. The pathname printed con‐
tains no symbolic links if the -P option is supplied or the -o physical option to the set
builtin command is enabled. If the -L option is used, the pathname printed may contain
symbolic links. The return status is 0 unless an error occurs while reading the name of
the current directory or an invalid option is supplied.
read [-ers] [-a aname] [-d delim] [-i text] [-n nchars] [-N nchars] [-p prompt] [-t timeout] [-u
fd] [name ...]
One line is read from the standard input, or from the file descriptor fd supplied as an
argument to the -u option, split into words as described above under Word Splitting, and
the first word is assigned to the first name, the second word to the second name, and so
on. If there are more words than names, the remaining words and their intervening delim‐
iters are assigned to the last name. If there are fewer words read from the input stream
than names, the remaining names are assigned empty values. The characters in IFS are used
to split the line into words using the same rules the shell uses for expansion (described
above under Word Splitting). The backslash character (\) may be used to remove any spe‐
cial meaning for the next character read and for line continuation. Options, if supplied,
have the following meanings:
-a aname
The words are assigned to sequential indices of the array variable aname, starting
at 0. aname is unset before any new values are assigned. Other name arguments are
ignored.
-d delim
The first character of delim is used to terminate the input line, rather than new‐
line. If delim is the empty string, read will terminate a line when it reads a NUL
character.
-e If the standard input is coming from a terminal, readline (see READLINE above) is
used to obtain the line. Readline uses the current (or default, if line editing
was not previously active) editing settings, but uses Readline's default filename
completion.
-i text
If readline is being used to read the line, text is placed into the editing buffer
before editing begins.
-n nchars
read returns after reading nchars characters rather than waiting for a complete
line of input, but honors a delimiter if fewer than nchars characters are read be‐
fore the delimiter.
-N nchars
read returns after reading exactly nchars characters rather than waiting for a com‐
plete line of input, unless EOF is encountered or read times out. Delimiter char‐
acters encountered in the input are not treated specially and do not cause read to
return until nchars characters are read. The result is not split on the characters
in IFS; the intent is that the variable is assigned exactly the characters read
(with the exception of backslash; see the -r option below).
-p prompt
Display prompt on standard error, without a trailing newline, before attempting to
read any input. The prompt is displayed only if input is coming from a terminal.
-r Backslash does not act as an escape character. The backslash is considered to be
part of the line. In particular, a backslash-newline pair may not then be used as
a line continuation.
-s Silent mode. If input is coming from a terminal, characters are not echoed.
-t timeout
Cause read to time out and return failure if a complete line of input (or a speci‐
fied number of characters) is not read within timeout seconds. timeout may be a
decimal number with a fractional portion following the decimal point. This option
is only effective if read is reading input from a terminal, pipe, or other special
file; it has no effect when reading from regular files. If read times out, read
saves any partial input read into the specified variable name. If timeout is 0,
read returns immediately, without trying to read any data. The exit status is 0 if
input is available on the specified file descriptor, non-zero otherwise. The exit
status is greater than 128 if the timeout is exceeded.
-u fd Read input from file descriptor fd.
If no names are supplied, the line read, without the ending delimiter but otherwise unmod‐
ified, is assigned to the variable REPLY. The exit status is zero, unless end-of-file is
encountered, read times out (in which case the status is greater than 128), a variable as‐
signment error (such as assigning to a readonly variable) occurs, or an invalid file de‐
scriptor is supplied as the argument to -u.
readonly [-aAf] [-p] [name[=word] ...]
The given names are marked readonly; the values of these names may not be changed by sub‐
sequent assignment. If the -f option is supplied, the functions corresponding to the
names are so marked. The -a option restricts the variables to indexed arrays; the -A op‐
tion restricts the variables to associative arrays. If both options are supplied, -A
takes precedence. If no name arguments are given, or if the -p option is supplied, a list
of all readonly names is printed. The other options may be used to restrict the output to
a subset of the set of readonly names. The -p option causes output to be displayed in a
format that may be reused as input. If a variable name is followed by =word, the value of
the variable is set to word. The return status is 0 unless an invalid option is encoun‐
tered, one of the names is not a valid shell variable name, or -f is supplied with a name
that is not a function.
return [n]
Causes a function to stop executing and return the value specified by n to its caller. If
n is omitted, the return status is that of the last command executed in the function body.
If return is executed by a trap handler, the last command used to determine the status is
the last command executed before the trap handler. If return is executed during a DEBUG
trap, the last command used to determine the status is the last command executed by the
trap handler before return was invoked. If return is used outside a function, but during
execution of a script by the . (source) command, it causes the shell to stop executing
that script and return either n or the exit status of the last command executed within the
script as the exit status of the script. If n is supplied, the return value is its least
significant 8 bits. The return status is non-zero if return is supplied a non-numeric ar‐
gument, or is used outside a function and not during execution of a script by . or source.
Any command associated with the RETURN trap is executed before execution resumes after the
function or script.
set [--abefhkmnptuvxBCEHPT] [-o option-name] [arg ...]
set [+abefhkmnptuvxBCEHPT] [+o option-name] [arg ...]
Without options, the name and value of each shell variable are displayed in a format that
can be reused as input for setting or resetting the currently-set variables. Read-only
variables cannot be reset. In posix mode, only shell variables are listed. The output is
sorted according to the current locale. When options are specified, they set or unset
shell attributes. Any arguments remaining after option processing are treated as values
for the positional parameters and are assigned, in order, to $1, $2, ... $n. Options, if
specified, have the following meanings:
-a Each variable or function that is created or modified is given the export attri‐
bute and marked for export to the environment of subsequent commands.
-b Report the status of terminated background jobs immediately, rather than before
the next primary prompt. This is effective only when job control is enabled.
-e Exit immediately if a pipeline (which may consist of a single simple command), a
list, or a compound command (see SHELL GRAMMAR above), exits with a non-zero sta‐
tus. The shell does not exit if the command that fails is part of the command
list immediately following a while or until keyword, part of the test following
the if or elif reserved words, part of any command executed in a && or || list ex‐
cept the command following the final && or ||, any command in a pipeline but the
last, or if the command's return value is being inverted with !. If a compound
command other than a subshell returns a non-zero status because a command failed
while -e was being ignored, the shell does not exit. A trap on ERR, if set, is
executed before the shell exits. This option applies to the shell environment and
each subshell environment separately (see COMMAND EXECUTION ENVIRONMENT above),
and may cause subshells to exit before executing all the commands in the subshell.
If a compound command or shell function executes in a context where -e is being
ignored, none of the commands executed within the compound command or function
body will be affected by the -e setting, even if -e is set and a command returns a
failure status. If a compound command or shell function sets -e while executing
in a context where -e is ignored, that setting will not have any effect until the
compound command or the command containing the function call completes.
-f Disable pathname expansion.
-h Remember the location of commands as they are looked up for execution. This is
enabled by default.
-k All arguments in the form of assignment statements are placed in the environment
for a command, not just those that precede the command name.
-m Monitor mode. Job control is enabled. This option is on by default for interac‐
tive shells on systems that support it (see JOB CONTROL above). All processes run
in a separate process group. When a background job completes, the shell prints a
line containing its exit status.
-n Read commands but do not execute them. This may be used to check a shell script
for syntax errors. This is ignored by interactive shells.
-o option-name
The option-name can be one of the following:
allexport
Same as -a.
braceexpand
Same as -B.
emacs Use an emacs-style command line editing interface. This is enabled by de‐
fault when the shell is interactive, unless the shell is started with the
--noediting option. This also affects the editing interface used for read
-e.
errexit Same as -e.
errtrace
Same as -E.
functrace
Same as -T.
hashall Same as -h.
histexpand
Same as -H.
history Enable command history, as described above under HISTORY. This option is
on by default in interactive shells.
ignoreeof
The effect is as if the shell command ``IGNOREEOF=10 had been executed
(see Shell Variables above).
keyword Same as -k.
monitor Same as -m.
noclobber
Same as -C.
noexec Same as -n.
noglob Same as -f.
nolog Currently ignored.
notify Same as -b.
nounset Same as -u.
onecmd Same as -t.
physical
Same as -P.
pipefail
If set, the return value of a pipeline is the value of the last (right‐
most) command to exit with a non-zero status, or zero if all commands in
the pipeline exit successfully. This option is disabled by default.
posix Change the behavior of bash where the default operation differs from the
POSIX standard to match the standard (posix mode). See SEE ALSO below for
a reference to a document that details how posix mode affects bash's be‐
havior.
privileged
Same as -p.
verbose Same as -v.
vi Use a vi-style command line editing interface. This also affects the
editing interface used for read -e.
xtrace Same as -x.
If -o is supplied with no option-name, the values of the current options are
printed. If +o is supplied with no option-name, a series of set commands to
recreate the current option settings is displayed on the standard output.
-p Turn on privileged mode. In this mode, the $ENV and $BASH_ENV files are not pro‐
cessed, shell functions are not inherited from the environment, and the SHELLOPTS,
BASHOPTS, CDPATH, and GLOBIGNORE variables, if they appear in the environment, are
ignored. If the shell is started with the effective user (group) id not equal to
the real user (group) id, and the -p option is not supplied, these actions are
taken and the effective user id is set to the real user id. If the -p option is
supplied at startup, the effective user id is not reset. Turning this option off
causes the effective user and group ids to be set to the real user and group ids.
-t Exit after reading and executing one command.
-u Treat unset variables and parameters other than the special parameters "@" and "*"
as an error when performing parameter expansion. If expansion is attempted on an
unset variable or parameter, the shell prints an error message, and, if not inter‐
active, exits with a non-zero status.
-v Print shell input lines as they are read.
-x After expanding each simple command, for command, case command, select command, or
arithmetic for command, display the expanded value of PS4, followed by the command
and its expanded arguments or associated word list.
-B The shell performs brace expansion (see Brace Expansion above). This is on by de‐
fault.
-C If set, bash does not overwrite an existing file with the >, >&, and <> redirect‐
ion operators. This may be overridden when creating output files by using the re‐
direction operator >| instead of >.
-E If set, any trap on ERR is inherited by shell functions, command substitutions,
and commands executed in a subshell environment. The ERR trap is normally not in‐
herited in such cases.
-H Enable ! style history substitution. This option is on by default when the shell
is interactive.
-P If set, the shell does not resolve symbolic links when executing commands such as
cd that change the current working directory. It uses the physical directory
structure instead. By default, bash follows the logical chain of directories when
performing commands which change the current directory.
-T If set, any traps on DEBUG and RETURN are inherited by shell functions, command
substitutions, and commands executed in a subshell environment. The DEBUG and RE‐
TURN traps are normally not inherited in such cases.
-- If no arguments follow this option, then the positional parameters are unset.
Otherwise, the positional parameters are set to the args, even if some of them be‐
gin with a -.
- Signal the end of options, cause all remaining args to be assigned to the posi‐
tional parameters. The -x and -v options are turned off. If there are no args,
the positional parameters remain unchanged.
The options are off by default unless otherwise noted. Using + rather than - causes these
options to be turned off. The options can also be specified as arguments to an invocation
of the shell. The current set of options may be found in $-. The return status is always
true unless an invalid option is encountered.
shift [n]
The positional parameters from n+1 ... are renamed to $1 .... Parameters represented by
the numbers $# down to $#-n+1 are unset. n must be a non-negative number less than or
equal to $#. If n is 0, no parameters are changed. If n is not given, it is assumed to
be 1. If n is greater than $#, the positional parameters are not changed. The return
status is greater than zero if n is greater than $# or less than zero; otherwise 0.
shopt [-pqsu] [-o] [optname ...]
Toggle the values of settings controlling optional shell behavior. The settings can be
either those listed below, or, if the -o option is used, those available with the -o op‐
tion to the set builtin command. With no options, or with the -p option, a list of all
settable options is displayed, with an indication of whether or not each is set; if opt‐
names are supplied, the output is restricted to those options. The -p option causes out‐
put to be displayed in a form that may be reused as input. Other options have the follow‐
ing meanings:
-s Enable (set) each optname.
-u Disable (unset) each optname.
-q Suppresses normal output (quiet mode); the return status indicates whether the opt‐
name is set or unset. If multiple optname arguments are given with -q, the return
status is zero if all optnames are enabled; non-zero otherwise.
-o Restricts the values of optname to be those defined for the -o option to the set
builtin.
If either -s or -u is used with no optname arguments, shopt shows only those options which
are set or unset, respectively. Unless otherwise noted, the shopt options are disabled
(unset) by default.
The return status when listing options is zero if all optnames are enabled, non-zero oth‐
erwise. When setting or unsetting options, the return status is zero unless an optname is
not a valid shell option.
The list of shopt options is:
assoc_expand_once
If set, the shell suppresses multiple evaluation of associative array subscripts
during arithmetic expression evaluation, while executing builtins that can perform
variable assignments, and while executing builtins that perform array dereferenc‐
ing.
autocd If set, a command name that is the name of a directory is executed as if it were
the argument to the cd command. This option is only used by interactive shells.
cdable_vars
If set, an argument to the cd builtin command that is not a directory is assumed
to be the name of a variable whose value is the directory to change to.
cdspell If set, minor errors in the spelling of a directory component in a cd command will
be corrected. The errors checked for are transposed characters, a missing charac‐
ter, and one character too many. If a correction is found, the corrected filename
is printed, and the command proceeds. This option is only used by interactive
shells.
checkhash
If set, bash checks that a command found in the hash table exists before trying to
execute it. If a hashed command no longer exists, a normal path search is per‐
formed.
checkjobs
If set, bash lists the status of any stopped and running jobs before exiting an
interactive shell. If any jobs are running, this causes the exit to be deferred
until a second exit is attempted without an intervening command (see JOB CONTROL
above). The shell always postpones exiting if any jobs are stopped.
checkwinsize
If set, bash checks the window size after each external (non-builtin) command and,
if necessary, updates the values of LINES and COLUMNS. This option is enabled by
default.
cmdhist If set, bash attempts to save all lines of a multiple-line command in the same
history entry. This allows easy re-editing of multi-line commands. This option
is enabled by default, but only has an effect if command history is enabled, as
described above under HISTORY.
compat31
compat32
compat40
compat41
compat42
compat43
compat44
These control aspects of the shell's compatibility mode (see SHELL COMPATIBILITY
MODE below).
complete_fullquote
If set, bash quotes all shell metacharacters in filenames and directory names when
performing completion. If not set, bash removes metacharacters such as the dollar
sign from the set of characters that will be quoted in completed filenames when
these metacharacters appear in shell variable references in words to be completed.
This means that dollar signs in variable names that expand to directories will not
be quoted; however, any dollar signs appearing in filenames will not be quoted,
either. This is active only when bash is using backslashes to quote completed
filenames. This variable is set by default, which is the default bash behavior in
versions through 4.2.
direxpand
If set, bash replaces directory names with the results of word expansion when per‐
forming filename completion. This changes the contents of the readline editing
buffer. If not set, bash attempts to preserve what the user typed.
dirspell
If set, bash attempts spelling correction on directory names during word comple‐
tion if the directory name initially supplied does not exist.
dotglob If set, bash includes filenames beginning with a `.' in the results of pathname
expansion. The filenames ``. and ``.. must always be matched explicitly,
even if dotglob is set.
execfail
If set, a non-interactive shell will not exit if it cannot execute the file speci‐
fied as an argument to the exec builtin command. An interactive shell does not
exit if exec fails.
expand_aliases
If set, aliases are expanded as described above under ALIASES. This option is en‐
abled by default for interactive shells.
extdebug
If set at shell invocation, or in a shell startup file, arrange to execute the de‐
bugger profile before the shell starts, identical to the --debugger option. If
set after invocation, behavior intended for use by debuggers is enabled:
1. The -F option to the declare builtin displays the source file name and line
number corresponding to each function name supplied as an argument.
2. If the command run by the DEBUG trap returns a non-zero value, the next
command is skipped and not executed.
3. If the command run by the DEBUG trap returns a value of 2, and the shell is
executing in a subroutine (a shell function or a shell script executed by
the . or source builtins), the shell simulates a call to return.
4. BASH_ARGC and BASH_ARGV are updated as described in their descriptions
above.
5. Function tracing is enabled: command substitution, shell functions, and
subshells invoked with ( command ) inherit the DEBUG and RETURN traps.
6. Error tracing is enabled: command substitution, shell functions, and sub‐
shells invoked with ( command ) inherit the ERR trap.
extglob If set, the extended pattern matching features described above under Pathname Ex‐
pansion are enabled.
extquote
If set, $'string' and $"string" quoting is performed within ${parameter} expan‐
sions enclosed in double quotes. This option is enabled by default.
failglob
If set, patterns which fail to match filenames during pathname expansion result in
an expansion error.
force_fignore
If set, the suffixes specified by the FIGNORE shell variable cause words to be ig‐
nored when performing word completion even if the ignored words are the only pos‐
sible completions. See SHELL VARIABLES above for a description of FIGNORE. This
option is enabled by default.
globasciiranges
If set, range expressions used in pattern matching bracket expressions (see Pat‐
tern Matching above) behave as if in the traditional C locale when performing com‐
parisons. That is, the current locale's collating sequence is not taken into ac‐
count, so b will not collate between A and B, and upper-case and lower-case ASCII
characters will collate together.
globstar
If set, the pattern ** used in a pathname expansion context will match all files
and zero or more directories and subdirectories. If the pattern is followed by a
/, only directories and subdirectories match.
gnu_errfmt
If set, shell error messages are written in the standard GNU error message format.
histappend
If set, the history list is appended to the file named by the value of the HIST‐
FILE variable when the shell exits, rather than overwriting the file.
histreedit
If set, and readline is being used, a user is given the opportunity to re-edit a
failed history substitution.
histverify
If set, and readline is being used, the results of history substitution are not
immediately passed to the shell parser. Instead, the resulting line is loaded
into the readline editing buffer, allowing further modification.
hostcomplete
If set, and readline is being used, bash will attempt to perform hostname comple‐
tion when a word containing a @ is being completed (see Completing under READLINE
above). This is enabled by default.
huponexit
If set, bash will send SIGHUP to all jobs when an interactive login shell exits.
inherit_errexit
If set, command substitution inherits the value of the errexit option, instead of
unsetting it in the subshell environment. This option is enabled when posix mode
is enabled.
interactive_comments
If set, allow a word beginning with # to cause that word and all remaining charac‐
ters on that line to be ignored in an interactive shell (see COMMENTS above).
This option is enabled by default.
lastpipe
If set, and job control is not active, the shell runs the last command of a pipe‐
line not executed in the background in the current shell environment.
lithist If set, and the cmdhist option is enabled, multi-line commands are saved to the
history with embedded newlines rather than using semicolon separators where possi‐
ble.
localvar_inherit
If set, local variables inherit the value and attributes of a variable of the same
name that exists at a previous scope before any new value is assigned. The
nameref attribute is not inherited.
localvar_unset
If set, calling unset on local variables in previous function scopes marks them so
subsequent lookups find them unset until that function returns. This is identical
to the behavior of unsetting local variables at the current function scope.
login_shell
The shell sets this option if it is started as a login shell (see INVOCATION
above). The value may not be changed.
mailwarn
If set, and a file that bash is checking for mail has been accessed since the last
time it was checked, the message ``The mail in mailfile has been read is dis‐
played.
no_empty_cmd_completion
If set, and readline is being used, bash will not attempt to search the PATH for
possible completions when completion is attempted on an empty line.
nocaseglob
If set, bash matches filenames in a case-insensitive fashion when performing path‐
name expansion (see Pathname Expansion above).
nocasematch
If set, bash matches patterns in a case-insensitive fashion when performing match‐
ing while executing case or [[ conditional commands, when performing pattern sub‐
stitution word expansions, or when filtering possible completions as part of pro‐
grammable completion.
nullglob
If set, bash allows patterns which match no files (see Pathname Expansion above)
to expand to a null string, rather than themselves.
progcomp
If set, the programmable completion facilities (see Programmable Completion above)
are enabled. This option is enabled by default.
progcomp_alias
If set, and programmable completion is enabled, bash treats a command name that
doesn't have any completions as a possible alias and attempts alias expansion. If
it has an alias, bash attempts programmable completion using the command word re‐
sulting from the expanded alias.
promptvars
If set, prompt strings undergo parameter expansion, command substitution, arith‐
metic expansion, and quote removal after being expanded as described in PROMPTING
above. This option is enabled by default.
restricted_shell
The shell sets this option if it is started in restricted mode (see RESTRICTED
SHELL below). The value may not be changed. This is not reset when the startup
files are executed, allowing the startup files to discover whether or not a shell
is restricted.
shift_verbose
If set, the shift builtin prints an error message when the shift count exceeds the
number of positional parameters.
sourcepath
If set, the source (.) builtin uses the value of PATH to find the directory con‐
taining the file supplied as an argument. This option is enabled by default.
xpg_echo
If set, the echo builtin expands backslash-escape sequences by default.
suspend [-f]
Suspend the execution of this shell until it receives a SIGCONT signal. A login shell
cannot be suspended; the -f option can be used to override this and force the suspension.
The return status is 0 unless the shell is a login shell and -f is not supplied, or if job
control is not enabled.
test expr
[ expr ]
Return a status of 0 (true) or 1 (false) depending on the evaluation of the conditional
expression expr. Each operator and operand must be a separate argument. Expressions are
composed of the primaries described above under CONDITIONAL EXPRESSIONS. test does not
accept any options, nor does it accept and ignore an argument of -- as signifying the end
of options.
Expressions may be combined using the following operators, listed in decreasing order of
precedence. The evaluation depends on the number of arguments; see below. Operator
precedence is used when there are five or more arguments.
! expr True if expr is false.
( expr )
Returns the value of expr. This may be used to override the normal precedence of
operators.
expr1 -a expr2
True if both expr1 and expr2 are true.
expr1 -o expr2
True if either expr1 or expr2 is true.
test and [ evaluate conditional expressions using a set of rules based on the number of
arguments.
0 arguments
The expression is false.
1 argument
The expression is true if and only if the argument is not null.
2 arguments
If the first argument is !, the expression is true if and only if the second argu‐
ment is null. If the first argument is one of the unary conditional operators
listed above under CONDITIONAL EXPRESSIONS, the expression is true if the unary
test is true. If the first argument is not a valid unary conditional operator, the
expression is false.
3 arguments
The following conditions are applied in the order listed. If the second argument
is one of the binary conditional operators listed above under CONDITIONAL EXPRES‐
SIONS, the result of the expression is the result of the binary test using the
first and third arguments as operands. The -a and -o operators are considered bi‐
nary operators when there are three arguments. If the first argument is !, the
value is the negation of the two-argument test using the second and third argu‐
ments. If the first argument is exactly ( and the third argument is exactly ), the
result is the one-argument test of the second argument. Otherwise, the expression
is false.
4 arguments
If the first argument is !, the result is the negation of the three-argument ex‐
pression composed of the remaining arguments. Otherwise, the expression is parsed
and evaluated according to precedence using the rules listed above.
5 or more arguments
The expression is parsed and evaluated according to precedence using the rules
listed above.
When used with test or [, the < and > operators sort lexicographically using ASCII order‐
ing.
times Print the accumulated user and system times for the shell and for processes run from the
shell. The return status is 0.
trap [-lp] [[arg] sigspec ...]
The command arg is to be read and executed when the shell receives signal(s) sigspec. If
arg is absent (and there is a single sigspec) or -, each specified signal is reset to its
original disposition (the value it had upon entrance to the shell). If arg is the null
string the signal specified by each sigspec is ignored by the shell and by the commands it
invokes. If arg is not present and -p has been supplied, then the trap commands associ‐
ated with each sigspec are displayed. If no arguments are supplied or if only -p is
given, trap prints the list of commands associated with each signal. The -l option causes
the shell to print a list of signal names and their corresponding numbers. Each sigspec
is either a signal name defined in <signal.h>, or a signal number. Signal names are case
insensitive and the SIG prefix is optional.
If a sigspec is EXIT (0) the command arg is executed on exit from the shell. If a sigspec
is DEBUG, the command arg is executed before every simple command, for command, case com‐
mand, select command, every arithmetic for command, and before the first command executes
in a shell function (see SHELL GRAMMAR above). Refer to the description of the extdebug
option to the shopt builtin for details of its effect on the DEBUG trap. If a sigspec is
RETURN, the command arg is executed each time a shell function or a script executed with
the . or source builtins finishes executing.
If a sigspec is ERR, the command arg is executed whenever a pipeline (which may consist of
a single simple command), a list, or a compound command returns a non-zero exit status,
subject to the following conditions. The ERR trap is not executed if the failed command
is part of the command list immediately following a while or until keyword, part of the
test in an if statement, part of a command executed in a && or || list except the command
following the final && or ||, any command in a pipeline but the last, or if the command's
return value is being inverted using !. These are the same conditions obeyed by the er‐
rexit (-e) option.
Signals ignored upon entry to the shell cannot be trapped or reset. Trapped signals that
are not being ignored are reset to their original values in a subshell or subshell envi‐
ronment when one is created. The return status is false if any sigspec is invalid; other‐
wise trap returns true.
type [-aftpP] name [name ...]
With no options, indicate how each name would be interpreted if used as a command name.
If the -t option is used, type prints a string which is one of alias, keyword, function,
builtin, or file if name is an alias, shell reserved word, function, builtin, or disk
file, respectively. If the name is not found, then nothing is printed, and an exit status
of false is returned. If the -p option is used, type either returns the name of the disk
file that would be executed if name were specified as a command name, or nothing if ``type
-t name would not return file. The -P option forces a PATH search for each name, even
if ``type -t name would not return file. If a command is hashed, -p and -P print the
hashed value, which is not necessarily the file that appears first in PATH. If the -a op‐
tion is used, type prints all of the places that contain an executable named name. This
includes aliases and functions, if and only if the -p option is not also used. The table
of hashed commands is not consulted when using -a. The -f option suppresses shell func‐
tion lookup, as with the command builtin. type returns true if all of the arguments are
found, false if any are not found.
ulimit [-HS] -a
ulimit [-HS] [-bcdefiklmnpqrstuvxPRT [limit]]
Provides control over the resources available to the shell and to processes started by it,
on systems that allow such control. The -H and -S options specify that the hard or soft
limit is set for the given resource. A hard limit cannot be increased by a non-root user
once it is set; a soft limit may be increased up to the value of the hard limit. If nei‐
ther -H nor -S is specified, both the soft and hard limits are set. The value of limit
can be a number in the unit specified for the resource or one of the special values hard,
soft, or unlimited, which stand for the current hard limit, the current soft limit, and no
limit, respectively. If limit is omitted, the current value of the soft limit of the re‐
source is printed, unless the -H option is given. When more than one resource is speci‐
fied, the limit name and unit, if appropriate, are printed before the value. Other op‐
tions are interpreted as follows:
-a All current limits are reported; no limits are set
-b The maximum socket buffer size
-c The maximum size of core files created
-d The maximum size of a process's data segment
-e The maximum scheduling priority ("nice")
-f The maximum size of files written by the shell and its children
-i The maximum number of pending signals
-k The maximum number of kqueues that may be allocated
-l The maximum size that may be locked into memory
-m The maximum resident set size (many systems do not honor this limit)
-n The maximum number of open file descriptors (most systems do not allow this value
to be set)
-p The pipe size in 512-byte blocks (this may not be set)
-q The maximum number of bytes in POSIX message queues
-r The maximum real-time scheduling priority
-s The maximum stack size
-t The maximum amount of cpu time in seconds
-u The maximum number of processes available to a single user
-v The maximum amount of virtual memory available to the shell and, on some systems,
to its children
-x The maximum number of file locks
-P The maximum number of pseudoterminals
-R The maximum time a real-time process can run before blocking, in microseconds
-T The maximum number of threads
If limit is given, and the -a option is not used, limit is the new value of the specified
resource. If no option is given, then -f is assumed. Values are in 1024-byte increments,
except for -t, which is in seconds; -R, which is in microseconds; -p, which is in units of
512-byte blocks; -P, -T, -b, -k, -n, and -u, which are unscaled values; and, when in posix
mode, -c and -f, which are in 512-byte increments. The return status is 0 unless an in‐
valid option or argument is supplied, or an error occurs while setting a new limit.
umask [-p] [-S] [mode]
The user file-creation mask is set to mode. If mode begins with a digit, it is inter‐
preted as an octal number; otherwise it is interpreted as a symbolic mode mask similar to
that accepted by chmod(1). If mode is omitted, the current value of the mask is printed.
The -S option causes the mask to be printed in symbolic form; the default output is an oc‐
tal number. If the -p option is supplied, and mode is omitted, the output is in a form
that may be reused as input. The return status is 0 if the mode was successfully changed
or if no mode argument was supplied, and false otherwise.
unalias [-a] [name ...]
Remove each name from the list of defined aliases. If -a is supplied, all alias defini‐
tions are removed. The return value is true unless a supplied name is not a defined
alias.
unset [-fv] [-n] [name ...]
For each name, remove the corresponding variable or function. If the -v option is given,
each name refers to a shell variable, and that variable is removed. Read-only variables
may not be unset. If -f is specified, each name refers to a shell function, and the func‐
tion definition is removed. If the -n option is supplied, and name is a variable with the
nameref attribute, name will be unset rather than the variable it references. -n has no
effect if the -f option is supplied. If no options are supplied, each name refers to a
variable; if there is no variable by that name, a function with that name, if any, is un‐
set. Each unset variable or function is removed from the environment passed to subsequent
commands. If any of BASH_ALIASES, BASH_ARGV0, BASH_CMDS, BASH_COMMAND, BASH_SUBSHELL,
BASHPID, COMP_WORDBREAKS, DIRSTACK, EPOCHREALTIME, EPOCHSECONDS, FUNCNAME, GROUPS,
HISTCMD, LINENO, RANDOM, SECONDS, or SRANDOM are unset, they lose their special proper‐
ties, even if they are subsequently reset. The exit status is true unless a name is read‐
only.
wait [-fn] [-p varname] [id ...]
Wait for each specified child process and return its termination status. Each id may be a
process ID or a job specification; if a job spec is given, all processes in that job's
pipeline are waited for. If id is not given, wait waits for all running background jobs
and the last-executed process substitution, if its process id is the same as $!, and the
return status is zero. If the -n option is supplied, wait waits for a single job from the
list of ids or, if no ids are supplied, any job, to complete and returns its exit status.
If none of the supplied arguments is a child of the shell, or if no arguments are supplied
and the shell has no unwaited-for children, the exit status is 127. If the -p option is
supplied, the process or job identifier of the job for which the exit status is returned
is assigned to the variable varname named by the option argument. The variable will be
unset initially, before any assignment. This is useful only when the -n option is sup‐
plied. Supplying the -f option, when job control is enabled, forces wait to wait for id
to terminate before returning its status, instead of returning when it changes status. If
id specifies a non-existent process or job, the return status is 127. Otherwise, the re‐
turn status is the exit status of the last process or job waited for.
SHELL COMPATIBILITY MODE
Bash-4.0 introduced the concept of a `shell compatibility level', specified as a set of options
to the shopt builtin compat31, compat32, compat40, compat41, and so on). There is only one cur‐
rent compatibility level -- each option is mutually exclusive. The compatibility level is in‐
tended to allow users to select behavior from previous versions that is incompatible with newer
versions while they migrate scripts to use current features and behavior. It's intended to be a
temporary solution.
This section does not mention behavior that is standard for a particular version (e.g., setting
compat32 means that quoting the rhs of the regexp matching operator quotes special regexp charac‐
ters in the word, which is default behavior in bash-3.2 and above).
If a user enables, say, compat32, it may affect the behavior of other compatibility levels up to
and including the current compatibility level. The idea is that each compatibility level con‐
trols behavior that changed in that version of bash, but that behavior may have been present in
earlier versions. For instance, the change to use locale-based comparisons with the [[ command
came in bash-4.1, and earlier versions used ASCII-based comparisons, so enabling compat32 will
enable ASCII-based comparisons as well. That granularity may not be sufficient for all uses, and
as a result users should employ compatibility levels carefully. Read the documentation for a
particular feature to find out the current behavior.
Bash-4.3 introduced a new shell variable: BASH_COMPAT. The value assigned to this variable (a
decimal version number like 4.2, or an integer corresponding to the compatNN option, like 42) de‐
termines the compatibility level.
Starting with bash-4.4, Bash has begun deprecating older compatibility levels. Eventually, the
options will be removed in favor of BASH_COMPAT.
Bash-5.0 is the final version for which there will be an individual shopt option for the previous
version. Users should use BASH_COMPAT on bash-5.0 and later versions.
The following table describes the behavior changes controlled by each compatibility level set‐
ting. The compatNN tag is used as shorthand for setting the compatibility level to NN using one
of the following mechanisms. For versions prior to bash-5.0, the compatibility level may be set
using the corresponding compatNN shopt option. For bash-4.3 and later versions, the BASH_COMPAT
variable is preferred, and it is required for bash-5.1 and later versions.
compat31
• quoting the rhs of the [[ command's regexp matching operator (=~) has no special
effect
compat32
• interrupting a command list such as "a ; b ; c" causes the execution of the next
command in the list (in bash-4.0 and later versions, the shell acts as if it re‐
ceived the interrupt, so interrupting one command in a list aborts the execution of
the entire list)
compat40
• the < and > operators to the [[ command do not consider the current locale when
comparing strings; they use ASCII ordering. Bash versions prior to bash-4.1 use
ASCII collation and strcmp(3); bash-4.1 and later use the current locale's colla‐
tion sequence and strcoll(3).
compat41
• in posix mode, time may be followed by options and still be recognized as a re‐
served word (this is POSIX interpretation 267)
• in posix mode, the parser requires that an even number of single quotes occur in
the word portion of a double-quoted parameter expansion and treats them specially,
so that characters within the single quotes are considered quoted (this is POSIX
interpretation 221)
compat42
• the replacement string in double-quoted pattern substitution does not undergo quote
removal, as it does in versions after bash-4.2
• in posix mode, single quotes are considered special when expanding the word portion
of a double-quoted parameter expansion and can be used to quote a closing brace or
other special character (this is part of POSIX interpretation 221); in later ver‐
sions, single quotes are not special within double-quoted word expansions
compat43
• the shell does not print a warning message if an attempt is made to use a quoted
compound assignment as an argument to declare (declare -a foo='(1 2)'). Later ver‐
sions warn that this usage is deprecated
• word expansion errors are considered non-fatal errors that cause the current com‐
mand to fail, even in posix mode (the default behavior is to make them fatal errors
that cause the shell to exit)
• when executing a shell function, the loop state (while/until/etc.) is not reset,
so break or continue in that function will break or continue loops in the calling
context. Bash-4.4 and later reset the loop state to prevent this
compat44
• the shell sets up the values used by BASH_ARGV and BASH_ARGC so they can expand to
the shell's positional parameters even if extended debugging mode is not enabled
• a subshell inherits loops from its parent context, so break or continue will cause
the subshell to exit. Bash-5.0 and later reset the loop state to prevent the exit
• variable assignments preceding builtins like export and readonly that set at‐
tributes continue to affect variables with the same name in the calling environment
even if the shell is not in posix mode
compat50
• Bash-5.1 changed the way $RANDOM is generated to introduce slightly more random‐
ness. If the shell compatibility level is set to 50 or lower, it reverts to the
method from bash-5.0 and previous versions, so seeding the random number generator
by assigning a value to RANDOM will produce the same sequence as in bash-5.0
• If the command hash table is empty, bash versions prior to bash-5.1 printed an in‐
formational message to that effect, even when producing output that can be reused
as input. Bash-5.1 suppresses that message when the -l option is supplied.
RESTRICTED SHELL
If bash is started with the name rbash, or the -r option is supplied at invocation, the shell be‐
comes restricted. A restricted shell is used to set up an environment more controlled than the
standard shell. It behaves identically to bash with the exception that the following are disal‐
lowed or not performed:
• changing directories with cd
• setting or unsetting the values of SHELL, PATH, HISTFILE, ENV, or BASH_ENV
• specifying command names containing /
• specifying a filename containing a / as an argument to the . builtin command
• specifying a filename containing a slash as an argument to the history builtin command
• specifying a filename containing a slash as an argument to the -p option to the hash
builtin command
• importing function definitions from the shell environment at startup
• parsing the value of SHELLOPTS from the shell environment at startup
• redirecting output using the >, >|, <>, >&, &>, and >> redirection operators
• using the exec builtin command to replace the shell with another command
• adding or deleting builtin commands with the -f and -d options to the enable builtin com‐
mand
• using the enable builtin command to enable disabled shell builtins
• specifying the -p option to the command builtin command
• turning off restricted mode with set +r or set +o restricted.
These restrictions are enforced after any startup files are read.
When a command that is found to be a shell script is executed (see COMMAND EXECUTION above),
rbash turns off any restrictions in the shell spawned to execute the script.
SEE ALSO
- Bash Reference Manual, Brian Fox and Chet Ramey
- The Gnu Readline Library, Brian Fox and Chet Ramey
- The Gnu History Library, Brian Fox and Chet Ramey
- Portable Operating System Interface (POSIX) Part 2: Shell and Utilities, IEEE --
- http://pubs.opengroup.org/onlinepubs/9699919799/
- http://tiswww.case.edu/~chet/bash/POSIX -- a description of posix mode
FILES
- /bin/bash
- bash実行ファイル
- /etc/profile
- ログインシェルで実行されるシステム全体の初期化ファイル。
- /etc/bash.bashrc
- システム全体の対話型シェルごとの起動ファイル
- /etc/bash.bash.logout
- ログインシェルが終了するときに実行される、システム全体のログインシェルのクリーンアップファイル
- ~/.bash_profile
- ログインシェルで実行される個人用初期化ファイル。
- ~/.bashrc
- 対話型シェルごとの起動ファイル
- ~/.bash_logout
- ログインシェルが終了するときに実行される、個々のログインシェルのクリーンアップファイル
- ~/.inputrc
- 個々のreadline初期化ファイル
AUTHORS
Brian Fox, Free Software Foundation
- bfox@gnu.org
Chet Ramey, Case Western Reserve University
- chet.ramey@case.edu
BUG REPORTS
bashでバグを見つけたら、報告すべきだ。 しかしその前に、それが本当にバグなのか、最新版のbashにバグがあるのかを確認する必要がある。 最新バージョンはいつでもftp://ftp.gnu.org/pub/gnu/bash/にある。
バグが実際に存在すると判断したら、bashbugコマンドを使ってバグレポートを提出しよう。 もし修正方法があれば、それもメールすることが推奨される！ 提案や`哲学的な'バグ報告は bug-bash@gnu.org に送信するか、Usenet ニュースグループ gnu.bash.bug に投稿してほしい。
すべてのバグリポートは以下を含めるべきである:
- The version number of bash
- The hardware and operating system
- The compiler used to compile
- A description of the bug behaviour
- A short script or `recipe' which exercises the bug
bashbugは最初の3つの項目をバグ報告用のテンプレートに自動的に挿入する。
このマニュアルページに関するコメントやバグ報告は、chet.ramey@case.eduへ
BUGS
大きすぎるし、遅すぎる。
bashと従来のバージョンのshには微妙な違いがあるが、そのほとんどはPOSIX仕様のためだ。
エイリアスは、使い方によっては混乱を招く。
シェル組み込みのコマンドや関数は、停止／再起動ができない。
複合コマンドや`a ; b ; c'形式のコマンドシーケンスは、プロセス停止時に 優雅に扱われない。 プロセスが停止されると、シェルは直ちに次のコマンドを実行する。 一連のコマンドを括弧で囲んでサブシェルに強制的に入れれば十分であり、サブシェルはユニットとして停止することができる。
配列変数は（まだ）エクスポートできない。
一度にアクティブなコプロセスは1つだけである。
External link
 | この記事は、Debianのmanpageの項目を翻訳一部改変しております。 |